• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.109-109
• /
• 2013

고주파 가속기의 전자선원의 설계 및 제작검증을 위한 hot-firing station을 설계하였다. 본 장치는 전자총의 빔 사이즈, 빔 전류 등을 측정할 수 있는 기기로 전원장치부, 고진공 챔버, 측정장치부 등 크게 세 부분으로 이루어져 있다. 특히 전원장치는 이중에너지 모드를 구현할 수 있도록 에너지의 크기가 다른 두개의 전자총 펄스를 생산해 낼 수 있도록 설계되었다. 고진공 챔버는 고전압 절연체를 이용하여 제작되었으며, 스크롤(건식) 펌프 와 터보 분자펌프를 이용하여 $10^{-7}$ torr 저/고진공 배기를 수행한 뒤, 이온 펌프를 이용하여 $10^{-8}$ torr까지 초고진공 배기를 수행할 수 있도록 설계하였다. 전자총으로 부터 나오는 전자들의 특성을 분석하기 위하여 패러데이 컵과 YAG 스크린을 설치하였다. 패러데이 컵은 전자빔의 인출 파형및 빔 전류를 측정하고, YAG 스크린은 CCD 카메라와 컴퓨터를 이용하여 전자빔의 균일도를 측정하여 정보를 얻도록 한다. 진공 쳄버의 최대 진공배기는 $10^{-9}$ torr이다.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.28-36
• /
• 2000

This study describes to analyze the characteristics for separation and recovery of both the dried particles and the purified solvent from the waste solvent through the vaporization process by the continuous and instantaneous vacuum drying system. The vacuum drying system for the waste solvents recovery consists of a feeding pump, a double pipe heat exchanger, a vacuum spray chamber, and a condenser. The vacuum drying system heats the waste solvent to the vapor in the double pipe heat exchanger and the expanded vapor is sprayed at the end of the tube. The vaporized solvent in the condenser are recovered. The particles in the waste solvent are separated and dried from the vapor in the vacuum spray chamber. Performance evaluation of the vacuum drying system was conducted using the mixture of the dried pigment particles and benzene or alkylbenzene as test samples. For the mixture of 10 wt% pigment particles an 90% benzene, the recovery efficiency of benzene was 88% with the purity of 99% and the recovery efficiency of dried particles was 94% with the moisture of 1.1 wt%. The size of pigment particles was decreased from $6.5\mu\textrm{m}$ to $5.6\mu\textrm{m}$ in diameter due to high speed spraying and dispersion in the vacuum drying system during drying process. Therefore, the vacuum drying system showed to be an effective method for separating particles and solvent in the waste solvent.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.322-325
• /
• 1999

We fabricated 18cm YBCO coated conductor comprising a YBCO superconducting film and CeO$_2$/YSZ/CeO$_2$ buffer films deposited on a biaxially textured Ni tape. For those film fabrications, we developed a new method, the cylindrical holder in a double chamber. This is alternative to the reel-to-reef method which is commonly tried to fabricate a long YBCO coated tape. We will discuss about the superconducting properties of the 18cm long YBCO coated tapes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.521-521
• /
• 2012

공정용 유도 결합 플라즈마에서 강자성체 페라이트를 이용하여 평형전력 공급 변압기를 사용하여 안정적인 고밀도 플라즈마 발생원 개발에 관한 연구를 수행하였다. 실험에서는2개의 평형전력 공급 변압기를 이중 구조 안테나에 설치하였다. 20-100 mTorr 압력 범위의 아르곤 기체에 30-150 W범위의 전력을 인가하여 반응용기의 중앙에서 부유 탐침법을 이용하여 플라즈마 밀도와 전자 온도를 측정하였다. 동일한 압력과 전력이 인가되었을 때, 평형전력 공급 변압기의 연결 유무에 따른 플라즈마 밀도를 비교하였으며, 본 연구에서 제시한 플라즈마 발생원에서의 플라즈마 밀도가 더욱 높음을 보였다. 또한 전자 온도와 부유 전위는 평행전력 공급방식을 이용한 플라즈마 발생원이 상대적으로 낮은 값을 가졌다. 이는 플라즈마 전위의 감소를 나타내며, 챔버 벽으로 빠져나가는 이온과 전자의 손실이 줄어들었음을 알 수 있다.

• Journal of the Korean Magnetics Society
• /
• v.23 no.6
• /
• pp.193-199
• /
• 2013

The regional distribution of magnetic isotropy depending on the post annealing condition for the dual-type structure GMR-SV (giant magnetoresistance-spin valve) of NiFe/Cu/NiFe/IrMn/NiFe/Cu/NiFe multilayer was investigated. The rotation of in-plane ferromagnetic layer induced by controlment of the post annealing temperature inside of the vacuum chamber. The magnetoresistive curves of a dual-type IrMn based GMR-SV depending on the direction of the magnetization easy axis of the free layer and the pinned layer are measured by between $0^{\circ}$ and $360^{\circ}$ angles for the applied fields. The optimum annealing temperature having a steady and isotropy magnetic sensitivity of 1.52 %/Oe was $107^{\circ}C$ in the rotational section of $0{\sim}90^{\circ}$. By investigating the switching process of magnetization for an arbitrary measuring direction, the in-plane orthogonal magnetization for the dual-type GMR-SV multilayer can be used by a high sensitive biosensor for detection of magnetized micro-beads.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.11-16
• /
• 2006

An experimental study of the transonic flows over NACA and double wedge airfoils was conducted with a shock tube. The configuration of test section with a slotted wall and chamber was designed and tested to minimize wall and reflected shock wave effects and use the shock tube as simple and less costly wind tunnel generating the relatively high Reynolds numbers transonic flow. Transonic airfoil flows at hot gas Mach numbers of 0.80~0.84, Reynolds number of about $1.2{\times}10^6$ on airfoil chord length and angles of attack of $0^{\circ}$ and $2^{\circ}$ were visualized with the shadowgraph method. The shock wave profiles on the airfoils were compared with the corresponding results from the conventional transonic wind tunnel tests. The experimental results showed that present shock tube exhibited the proper performance characteristics as transonic wind tunnel for tested Mach number range and airfoils.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.316-321
• /
• 2013

This study was carried out to analyze heat transfer characteristics and heat flow through air-inflated double layer PO film with thermal resistance method. The experiments was conducted in the laboratory controlled air temperature between 258.0 K and 278.0 K. The experimental materials were made up two layers PO film and an inflated-air layer. The thickness of air-inflated layer was fixed at 3 types of 110, 175, 225 mm. The electrical circuit analogy for heat transfer by conduction, radiation and convection was introduced. Experimental data shows that the dominant thermal resistance in heat transfer through the air-inflated double layer film was convection. Calculation errors were 1.1~18.5 W for heat flow. In result, the method of thermal resistance could be introduced for analysis of heat flow characteristics through air-inflated double layer film.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2019

In this paper, a dual-band antenna is proposed for the autonomous vehicle as well as omni-directional. The proposed antenna operates in the 4G/LTE band (1,710~2,170MHz) and 5G/NR band (3,400~3,700MHz). In order to obtain the dual-band operation, the planar monopole antenna is proposed as the novel structure with single port of the 50ohm. To give the properties of dual-band, an additional antenna element with slit was added to the planar monopole antenna, and then a structural adjustment parameter was optimized for achieving the target performance in bands. The planar monopole antenna in the LTE band acts as the coupled feed for the added parasitic radiator in the 5G NR band. The proposed antenna has $38.5{\times}36.0{\times}1.0[mm^3]$ on a ground with diameter of 96mm. From the fabrication and measurement results, the impedance bandwidth (VSWR<2) of the proposed antenna covers 1,480~2,260MHz (LTE band: 1,710~2,170MHz) and 3,310~3,930MHz (5G NR band: 3,400~3,700MHz). The proposed planar monopole antenna also obtained the measured gain and radiation pattern of omni-directional radiation pattern in the anechoic chamber.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.4
• /
• pp.411-423
• /
• 2008

Pneumatic vibration isolator has a wide application for ground-vibration isolation of vibration-sensitive equipments. Recent advances In precision machine tools and instruments such as nano-technology or medical devices require a better isolation performance, which can be efficiently done by precise modeling- and design- of the isolation system. This paper will discuss an efficient transmissibility design method for pneumatic vibration isolator by employing the complex stiffness model of dual-chamber pneumatic spring developed in our previous research. Three design parameters of volume ratio between the two pneumatic chambers, the geometry of capillary tube connecting the two pneumatic chambers and finally the stiffness of diaphragm necessarily employed for prevention of air leakage were found to be important factors in transmissibility design. Based on design technique that maximizes damping of dual-chamber pneumatic spring, trade-off among the resonance frequency of transmissibility, peak transmissibility and transmissibility in high frequency range was found, which was not ever stated in previous researches. Furthermore this paper will discuss about negative role of diaphragm in transmissibility design. Then the design method proposed in this paper will be illustrated through experiment at measurements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.224-224
• /
• 2010

야금학적 정련은 태양전지 소재인 실리콘의 저가화를 통한 태양전지의 단가를 낮추는데 유망한 공정이다. 이중에서도 실리콘의 전자빔정련은 고순도의 실리콘 정련에 효과적인 기술이다. 본 연구에서는 전자빔용융법을 이용하여 실리콘 정련을 수행하였으며, 제조된 실리콘의 미세구조 및 분순물농도를 측정하였다. 고진공의 챔버 하부에 수냉동도가니가 위치해있고, 상부에 100 kW출력의 전자총이 설치되었다. 실리콘은 분쇄 및 세척과 같은 전처리 없이 수냉동도가니에 250g 이 장입되었다. 전자빔때턴은 소프트웨어를 통한 헌혈, 나선형의 경로(path)와 원형의 형상(Shape)이 결합하여 원형패턴과 나선형패턴의 형상으로 실리콘에 조사되었다. 전자빔의 출력을 15 kW로 실리콘을 용융하였고 분당 0.5 kW의 속도로 서냉하였다. 제조된 실리콘은 지름 100 mm, 높이 25 mm의 버튼형상이었으며, 횡방향으로 절단하여 미세구조와 불순물거동을 분석하였다. 미세구조는 광학현미경 (OM) 과 전자현미경 (SEM)을 통하여 관찰하였고 불순물거동은 유도결합플라즈마 분광분석기(ICP-AES) 을 통하여 분석하였다. 장입된 실리콘의 초기순도는 99.5 %이고, 전자빔정련 공정 후 99.996 %까지 향상되었다. 전자빔패턴을 이용한 고순도 실리콘의 정련은 태양전지 소재 개발에 유망한 기술로 활용될 것이다.