• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.619-628
• /
• 2009

To predict the time-dependent behavior of concrete structures, the models which describe the time-dependent characteristics of concrete, i.e. creep and shrinkage are required. However, there must be significant differences between the displacements that are obtained using the given creep and shrinkage models and the measured displacements, because of the uncertainties of creep and shrinkage model itself and those of environmental condition. There are some efforts to reduce these error or uncertainties by using the model which are obtained from creep test for the concrete in construction site. Nevertheless, the predicted values from this model may be still different from the actual values due to the same reason. This study aimed to propose a method of estimating the creep coefficient from the measured displacements of concrete structure, where creep model uncertainty factor was considered as an error factor of creep model. Numerical validation for double composite steel box and concrete beam showed desirable feasibility of the presented method. Consideration of the time-dependent characteristics of creep as one of the error factors make it possible to predict long-term behaviors of concrete structures more realistically, especially long-span PSC girder bridges and concrete cable-stayed bridges of which major problem is the geometry control under construction and maintenance.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.129-138
• /
• 2006

Helicopter-borne aeromagnetic surveys at two different times separated by three years were conducted to better understand the shallow subsurface structure of the Vulcano and Lipari volcanic complex, Aeolian Islands, southern Italy, and also to monitor the volcanic activity of the area. As there was no meaningful difference between the two magnetic datasets to imply an apparent change of the volcanic activity, the datasets were merged to produce an aeromagnetic map with wider coverage than was given by a single dataset. Apparent magnetisation intensity mapping was applied to terrain-corrected magnetic anomalies, and showed local magnetisation highs in and around Fossa Cone, suggesting heterogeneity of the cone. Magnetic modelling was conducted for three of those magnetisation highs. Each model implied the presence of concealed volcanic products overlain by pyroclastic rocks from the Fossa crater. The model for the Fossa crater area suggests a buried trachytic lava flow on the southern edge of the present crater. The magnetic model at Forgia Vecchia suggests that phreatic cones can be interpreted as resulting from a concealed eruptive centre, with thick latitic lavas that fill up Fossa Caldera. However, the distribution of lavas seems to be limited to a smaller area than was expected from drilling results. This can be explained partly by alteration of the lavas by intense hydrothermal activity, as seen at geothermal areas close to Porto Levante. The magnetic model at the north-eastern Fossa Cone implies that thick lavas accumulated as another eruption centre in the early stage of the activity of Fossa. Recent geoelectric surveys showed high-resistivity zones in the areas of the last two magnetic models.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.65-65
• /
• 2017

밭작물 중 양파와 마늘은 높은 노동투하시간, 노임의 상승, 복잡한 수거 과정 등으로 최근 재배면적이 감소하는 추세이다. 밭농업 활성화 방안으로 생산비 절감과 작업 속도 향상을 위한 수확기계 개발 연구로 줄기절단기가 개발되었다. 이 연구는 줄기절단기 예취날의 설치각이 절단부하에 미치는 영향을 분립체 해석 기법으로 분석하고자 하였다. 실험에 사용한 시뮬레이션은 EDEM으로 인장탄성계수, 전단탄성 계수, 중첩길이, 입자 반경 및 질량, 상대속도를 이용하여 충돌시 힘을 해석하고 인장 및 전단강도, 한계, 결합 길이를 통해 입자간 결합을 설정할 수 있다. 시제품으로 설계된 줄기절단기의 치수를 활용하여 프로그램 상에서 줄기 절단 시뮬레이션을 진행하여 절단부하 결과를 얻도록 하였고 칼날 설치각을 30도, 45도, 60도로 변경하여 각각의 부하를 분석하여 경향성을 파악하고자 하였다. 실험에서 사용한 프로그램은 EDEM 2.7.1 Academic Research 버전이며 시뮬레이션을 진행한 PC의 사양은 Intel(R) $Core^{TM}$ i7-4790 CPU @ 3.60GHz, Memory 16.0GB이다. 줄기 절단 시뮬레이션에 적용시킨 줄기 모델은 마늘의 조건을 적용시켜 직경 1mm의 입자로 이루어진 지름 12mm, 높이 214mm의 원통형 모델이며 60.32N의 최대절단력을 가지고 있다. 줄기절단기는 2개의 회전날을 가지고 있으나 좌우대칭을 적용하여 절반에 대한 해석으로 하나의 회전날로 절단을 하도록 줄기 모델은 4조로 하여 3열을 140mm 간격으로 위치시켰다. 줄기절단기의 칼날은 반경 350mm로 회전하며 진행속도는 1.65m/s, 회전속도는 1680rpm으로 작업하도록 하였다. 시뮬레이션은 0.5초의 시간에 대해 해석하도록 하였으며 0.003초 간격으로 칼날에 가해지는 힘을 구하여 저장하도록 하였다. 시뮬레이션 해석시간은 약 116시간이었으며 설치각별 시간에 따른 칼날에 가해지는 압축력 값과 그래프를 얻을 수 있었다. 대부분의 시간에서 절단이 이루어지지 않으므로 0의 값을 나타내었으며 절단이 이루어지는 시점에 절단부하가 나타났다. 결과 해석을 위해 그래프의 피크 값들을 이용하였으며 그 중 상위 6개의 값으로 분석하였다. 30도, 45도, 60도의 설치각에 따른 절단부하의 평균 값은 각각 105.4N, 160.5N, 215.9N으로 나타났다. 설치각에 따른 절단부하의 경향성은 유의수준은 3.93%로 각각의 차이가 유의미하게 나타났으며 상관계수는 0.489로 증가하는 경향이 보였다. 그러나 $R^2$는 0.2394로 낮은 값을 보여 데이터 처리 방법의 개선과 적절한 회귀 모델의 적용이 필요하다. 향후 포장시험을 진행하고 복합적으로 분석하여 경향성을 자세히 분석하고자 한다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.195-204
• /
• 2004

Poisson's ratio due to multiaxial creep of concrete reported by existing experimental works was controversial. Poisson's ratio calculated from measured strain is very sensitive to small experimental error. This sensitivity make it difficult to find out whether the Poisson's ratio varies with time or remain constant, and whether the Poisson's ratio has different value with stress states or not. A new approach method is needed to resolve the discrepancy and obtain reliable results. This paper presents analytical study on multiaxial creep test results. Microplane model as a new approach method is applied to optimally fitting the test data extracted from experimental studies on multiaxial creep of concrete. Double-power law is used as a model to present volumetric and deviatoric creep evolutions on a microplane. Six parameters representing the volumetric and deviatoric compliance functions are determined from regression analysis and the optimum fits accurately describe the test data. Poisson's ratio is calculated from the optimum fits and its value varies with time. Regression analysis is also performed assuming that Poisson's ratio remains constant with time. Four parameters are determined for this condition, and the error between the optimum fits and the test data is slightly larger than that for six parameter regression results. The constant Poisson's ratio with time is obtained from four parameter analysis results and the constant value can be used in practice without serious error.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.203-209
• /
• 2000

Top synthetic spin valves with structure Ta/NiFe/CoFe/Cu/CoFe(P 1)/Ru/CoFe(P2)/FeMn/Ta on Si (100) substrate with natural oxide were prepared by dc magnetron sputtering system. We have changed only the thickness in free layers and the thickness difference (Pl-P2) in two ferromagnetic layers separated by Ru, and investigated the effect of magnetic film thickness on interlayer coupling field in spin valve with synthetic antiferromagnet. According to the decrease of free layer thickness, interlayer coupling field was increased due to the magnetostatic coupling(orange peel coupling). In case of t$\_$P1/>t$\^$P2/, interlayer coupling field agreed well with the modified Neel model suggested in conventional spin valve structures by Kools et al. However, in case of t$\_$P1/>t$\^$P2/, it was found that the interlayer coupling field was not explained by the Modified Neel Model and was confirmed the necessity of further remodeling. The dependence of Cu thickness on the interlayer coupling field was investigated and 10 Oe of interlayer coupling field was obtained when the Cu thickness is 32 $\AA$.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.271-279
• /
• 2007

Ship structures are basically an assembly of plate elements and estimation load-carrying capacity or the ultimate strength is one of the most important criterion for estimated safety assessment and rational design on the ship structure. Also, Structural elements making up ship plated structures do not work separately against external load. One of the critical collapse events of a ship structure is the occurrence of overall buckling and plastic collapse of deck or bottom structure subjected to longitudinal bending. So, the deck and the bottom plates are reinforced by a number af longitudinal stiffeners to increase their strength and load-carrying capacity. For a rational design avoiding such a sudden collapse, it is very important to know the buckling and plastic behaviour or collapse pattern of the stiffened plate under axial compression. In this present study, to investigate effect af modeling range, the finite element method are used and their results are compared varying the analysis ranges. When making the FEA model, six types of structural modeling are adopted varying the cross section of stiffener. In the present paper, a series of FEM elastoplastic large deflection analyses is performed on a stiffened plate with fiat-bar, angle-bar and tee-bar stiffeners. When the applied axial loading, the influences of cross-sectional geometries on collapse behaviour are discussed. The purpose of the present study is examined to numerically calculate the characteristics of buckling and ultimate strength behavior according to the analysis method of ship's stiffened plate subject to axial loading.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.81-92
• /
• 2011

The rheological properties of Wyoming bentonites are strongly influenced by the size of particles, cation exchangeable capacity, arrangement and morphology of clay mineral. This paper presents the results of rheological investigations on the Wyoming bentonites aqueous dispersions: two types of particle flocculation were considered. For the Wyoming bentonite, 0g/L and 30g/L NaCl equivalent salinity were added in fresh and salt water to examine the rheological behavior. This paper examined the general rheological characteristics, compatibility of rheological models and correlation between soil structure and change in rheological properties of Wyoming bentonite caused by increasing salinity. From flow curves of bentonites hydrated with fresh water and salt water, the observed general flow behavior is very close to shear thinning with yield stress (or ideal Bingham fluid with yield stress and plastic viscosity). However, the change of shear stress at the same shear rate is clear, particularly for lower shear rate. Well-known rheological models are used to fit the data. There is a good agreement between rheological model and data: Carreau, Herschel-Bulkley and power-law for S=0g/L and bilinear, Herschel-Bulkley and power-law for S=30g/L. It may be due to the fact that the internal structural bonding (strong modification of particle-particle interactions from edge-to-edge and/or edge-to-face to face-to-face) in soil matrix is affected from the evolution of rheological properties with different salinities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.607-612
• /
• 1986

최근 테니스의 저변인구가 크게 증가함에 따라 테니스 라켓의 제작기술도 상당한 수준에 이르렀고 설계제작의 자동화에 의해서 양질의 제품이 시판되고 있다. 그러나 라켓에 볼이 임팩트될때 생기는 진동으로 야기되는 테니스 엘보우 등, 해결해야 할 문제들이 아직도 남아 있다. 이와같이 테니스 라켓의 정적인 강도 뿐만아니라 동적인 특성도 중요한 관심의 대상이 되어감에 따라 볼 컨트롤을 용이하게 한다거나, 안정타점영역(Sweet Spot)의 확장과 그립부의 진동등에 의해서 발생하는 엘보우 현상을 방지하기 위해 여러가지 연구가 수행되어 왔다. 특히, 다차원 스펙트럼해석 및 모우드 해석법에의해 그립부에 미치는 진동원의 동정과 라켓의 동적거동에 대해서 연구되었고, 라켓의 재질변경과 그립부의 구조변경에 의한 안정타점영역에 영향을 미치는 모우드 파라미터(Modal Parameter)의 추정에 관한 연구도 수행되었다. 이러한 연구들은 결국 안정타점영역을 확장시키거나 테니스 엘보우를 방지하기 위한 것으로서 이러한 목적을 달성하기위해 테니스 라켓의 진동 모우드에 관계되는 파라미터들을 찾아서 그 모우드 파라미터의 변화에 따르느 진동 모우드의 거동에 대해서 연구할 필요가 있다. 본 논문에서는 실험적인 모우드 해석법을 실제 테니스 라켓에 적용하여 모우드 파라미터들을 구한 다음 그 파라미터의 변화에 따르는 안정타점영역의 변화를 컴퓨터 시뮬레이션을 통해서 예측하였다. 또한 안정타점영역을 넓히고 라켓의 동특성을 개선시킬 수 있는 모우드 파라미터를 찾아서 테니스 라켓의 설계, 제작 단계에 정보를 제공하는 CAD(Computer Aided Design)에 좋은 자료를 얻고자 한다. 있으나 파도에 의한 영향이 가장 크므로 본 논문에서는 파도에 의한 영향만을 고려하였다. 파도는 쌍동선에 외란으로 작용하며 측정할 수 없는 양이므로 PID, LQ 제어에서는 제어모델에 포함되지 않지만 LQG 제어에서는 제어모델에 포함된다. LQG 제어의 경우 제어모델에 파도를 백색잡음으로 가정하고 제어기를 구성한 것 (LQG1)과 2차의 쉐이핑필터(shaping filter)를 사용하여 구성한 것(LQG2)으로 나누었다.져 한다.) 식도 이물에 의한, 또는 식도경술에 의한 합병증이 초래한 경우는 식도점막열상 1례 (1.8 %), 식도 천공 1례 (1.8 %) 였으며, 기도이물에 의한, 또는 기관지경술에 의한 합병증이 초래한 경우는 무기폐 2례 (11.1 %), 폐렴 3례 (16.7 %)로 나타났다.5예에서 소실되었다. 5 ) 청각심리검사 (Psychoacoustic evaluation)에서 폴립은 술전에 Grade 1∼2의 사성이 있었던 11예중 술후 10예에서 Grade 0로 되었으며 Grade 1∼2의 사성이 있었던 3예의 결절에서도 모두 Grade 0로 정상화되었다.>치를 측정한 결과 투여전과 차이가 없었다. 7) 이상의 결과로 볼때 Cis-platinum 사용으로 인한 이중독증은 신장기능이 정상일때는 충분한 hydration으로써 예방이 가능하며 동시에 금기로 알려져왔던 감음성난청이 있는 두경부악성종양환자에서도 세심한 주의하에 적절히 사용한다면 좋은 결과를 얻을 수 있을 것으로 사려된다.은 결과를 얻었기에 문헌고찰과 함께 보고하는 바이다. 1) 이관폐쇄술후 18시간에 최초로 삼출액이 확인되었으며 그 이후는 전실험군에서 삼출성중이염이 유발되다. 2

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.211-216
• /
• 2001

Top synthetic spin valves wi th structure Ta/NiFe/CoFe/Cu/CoFe(Pl)/Ru/CoFe(P2)/FeMn/Ta on Si (100) substrate with SiO$_2$ of 1500 were prepared by dc magnetron sputtering system. We have changed only the thickness of the free layer and the thickness difference (Pl-P2) in the two ferromagnetic layers separated by Ru, and investigated the effect of magnetic film thickness on the GMR properties and the interlayer coupling field in a spin valve with a synthetic antiferromagnet. As thickness difference of pinned layer was decreased from +25 to -25 , MR ratio was decreased gradually. However, there was a dip zone indicating a big change of MR ratio around Pl = P2, which can be due to the large canting of pinned layers. The modified Neel model was suggested for the top synthetic spin valve to explain the interlayer coupling field according to the thickness change of ferromagnetic layers. The interlayer coupling field was decreased due to the magnetostatic coupling (orange peel coupling) as suggested by model. However, the interlayer coupling field was not explained at the dip zone by the modified Neel model. The deviation of modified Neel model at the dip zone could be due to the largely canting of the pinned layers as well, which depends on different thickness in synthetic antiferromagnetic structure.

• Journal of Korea Water Resources Association
• /
• v.39 no.12 s.173
• /
• pp.1043-1056
• /
• 2006

Our ultimate purpose is to investigate the potential change in regional surface climate due to the global warming and to produce higher quality regional surface climate information over the Korean peninsula for comprehensive impact assessment. Toward this purpose, we carried out two 30-year long experiments, one for present day conditions (covering the period 1971-2000) and one for near future climate conditions (covering the period 2021-2050) with a regional climate model (RegCM3) using a one-way double-nested system. In order to obtain the confidence in a future climate projection, we first verify the model basic performance of how the reference simulation is realistic in comparison with a fairly dense observation network. We then examine the possible future changes in mean climate state as well as in the frequency and intensity of extreme climate events to be derived by difference between climate condition as a baseline and future simulated climate states with increased greenhouse gas. Emphasis in this study is placed on the high-resolution spatial/temporal aspects of the climate change scenarios under different climate settings over Korea generated by complex topography and coastlines that are relevant on a regional scale.