• 제목/요약/키워드: 이중에너지방사선흡수법

검색결과 2건 처리시간 0.015초

3D 프린팅기술을 이용한 골밀도 정도관리 대퇴골 팬텀 제작 및 유용성 평가 (Evaluation of Usefulness and Fabrication of Femur Phantom on Quality Control of Bone Mineral Density Using 3D Printing Technology)

  • 홍다영;이정;이준호;문재원;오한샘;정유원;진성현;홍종민;이인자
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제46권1호
    • /
    • pp.1-8
    • /
    • 2023
  • As the demand for bone mineral density testing increases in Korea, which is close to an aging society, it is necessary to evaluate the repeatability of equipment such as femur phantom other than l-spine for more accurate diagnosis. However, in clinical practice, it is often not possible to proceed such evaluation due to insufficient quality control conditions. Therefore, this study is to evaluate the usefulness of the femur phantom after fabricating the same using 3D printing technology. The femur phantom was output using GlowFill filament and FDM 3D printing type. Each phantom was repeatedly scaned 20 times to compare whether the existing l-spine phantom and the fabricated femur phantom were suitable as a phantom for quality control. Each time the seven researchers took three times, the location of the femur phantom was readjusted, and then scanned to confirm the error between the researchers. As a result of conducting repeatability evaluation using femur phantom, the coefficient of variation rate was 2%, which was within the minimum precision tolerance of 2.5%. The reproducibility between the researcher was also found to be suitable as the average coefficient of variation was 0.031 and the coefficient of variation rate was 3.1%, which was within the minimum precision error range of 5%. In conclusion, it is considered that the prospective attitude and usefulness of the femur phantom fabricated by 3D printing in clinical practice will be sufficient.

일부 대학생의 골밀도와 생활습관간의 관련성 (The Relation between Bone Mineral Density and Lifestyle in College Students)

  • 강태훈;이무식;배석환;김용권
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제39권3호
    • /
    • pp.429-434
    • /
    • 2016
  • 본 연구는 일부 한국 대학생들의 골밀도와 생활습관간의 관련성을 규명하고자 수행되었다. 먼저 이중에너지 방사선흡수법(DEXA)을 이용하여 총 121명의 대학생들의 요추와 대퇴골두의 골밀도(BMD)를 측정하였고, 생활습관에 관련된 설문은 자기기입식 질문지법을 이용하여 2014년 9월부터 동년 10월까지 실시하였다. 연구대상자의 일반적인 특성과 골밀도는 빈도분석을 통해 분포를 파악하였고, 연구대상자의 신체적 특성, 식이습관, 운동습관, 생활습관에 따른 골밀도(T-Score)의 차이를 검정하기 위하여 교차분석(Chi-square test)을 하였다. 수집한 자료는 SPSS 18.0을 이용하여 분석하였다. 대퇴골과 요추의 골밀도는 평균 $0.993{\pm}0.14g/cm^2$이었고, 골다공증은 없었으며, 골감소증은 30명(24.8%), 정상은 91명(75.2%)이었다. 체질량지수(BMI)가 높을수록, 생리주기가 규칙적인 여대생이, 주 150시간 이상 걷기를 시행한 군이, 청소년기에 규칙적으로 운동을 한 경험이 있는 군이 골감소증의 비율이 상대적으로 낮았고, 일 기준 전자기기를 6시간 이상 사용한 군이 골감소증의 비율이 상대적으로 높았는데, 이는 통계적으로 유의한 관계를 보이는 것으로 나타났다. 대학생의 신체적인 특성과 식이 운동 생활습관, 특히 청소년기의 운동습관은 골건강과 관련성이 있다. 추후 청소년과 대학생에 대한 식이 운동 생활습관에 관한 가이드라인을 제시하고, 이를 정규 교육과정과 연계하는 방안을 마련하는 것이 필요할 것으로 생각한다.