• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2117-2119
• /
• 2007

최근의 이상기후에 따른 악영향으로 항만구조물의 설계시 중요한 요소인 심해설계파가 증고되었다. 최근, 증고된 설계파에 대해 마루높이의 절감 및 단면축소에 따른 경제적 효과를 극대화시키기 위하여, 사석경사제형 제체 상부에 이중곡면 반파공을 적용한 각종 구조물형식이 도입되고 있는 추세이다. 본 연구에서는 수리모형실험을 통해 월파와 안정성 검토를 수행하여 방파제의 최적 단면을 선정하였다. 본연구의 수리모형실험에 적용된 단면형식은 총 4가지로 각각에 대해 월파량과 반사율을 측정하여 비교 검토하였다. 그 결과 TTP로 피복된 제체 상부에 이중곡면 반파공을 설치한 단면이 가장 우수한 단면으로 선정되었다. 또한, 이중곡면 반파호안의 계획과 설계시 체계적인 검토와 합리적인 단면계획을 수립하여 이를 통해 마루높이 절감에 따른 경제적 효과의 극대화를 기대할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.347-358
• /
• 2021

The objective of this study is to optimize the shape of doubly curved surface where a conformal array is equipped. That surface is modeled with a double-ellipsoid solid controlled by four parameters. By analyzing the performance of the conformal array beams with the beam pattern synthesis, two design parameters are determined. Then, we define the weighted object function which is formulated as the sum of sharp indexes for directivity index, the elevation resolution, and the bearing resolution. The direct calculation on all grids is used to evaluate the weighted object function and seek the optimal value of two design parameters when the weightings are given. In the simulation, four kinds of weighting cases are respectively applied to evaluate the weighted object function. The optimal shapes of double-ellipsoid solid are shown in each case. Especially, when the uniform weightings are used, the double-ellipsoid solid with more smooth surface is obtained.

• Coastal and Ocean
• /
• v.3 no.1
• /
• pp.38-48
• /
• 2010

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.134-143
• /
• 1999

The ship's bows and sterns are assembled with the curved blocks. In shipyards, the roller bending and the line heating or others are being used to fabricate such doubly curved shell. Firstly, the cylinder- or cone-type is formed through the roller bending, and then, the line heating is implemented to form the rest. This paper presents an algorithm to determine the direction for the roller bending and the shape to be formed as fabrication information. The direction for the roller bending is determined with Gauss mapping of the desired surface and the shape to form is calculated by comparing the bent shape with the desired shape.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.43-52
• /
• 1990

Theoretical foundation and algorithms are presented of a new surface modeling and pre-processing system for the three-dimensional structures. The modeling method is based on the boundary representation scheme and composed of two hierarchical model structures: curve-network and surface models. The concept of modeling curve as a union of links is introduced to facilitate surface modeling via various transfinite mapping techniques or Coons Patches. Efficiency and novel aspects of the present method are discussed. Finite element mesh genceration and application procedures will be reported in a later paper.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2006.09a
• /
• pp.165-168
• /
• 2006

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.4
• /
• pp.1-7
• /
• 2002

This paper presents a new approach for modeling human limbs shape from 3D scan data. Based on the cylindrical structure of limbs, the overall shape is approximated with a set of ellipsoids through ellipsoid fitting and interpolation of fit-ellipsoids. Then, the smooth domain surface representing the coarse shape is generated as the envelope surface of ellipsoidal sweep, and the fine details are reconstructed by constructing parametric displacement function on the domain surface. For fast calculation, the envelope surface is approximated with ellipse sweep surface, and points on the reconstructed surface are mapped onto the corresponding ellipsoid. We demonstrate the effectiveness of our approach for skeleton-driven body deformation.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.2
• /
• pp.38-43
• /
• 2002

Die-less forming is a cold forming process which is to bend thick flat plates into compound curved plates using two asymmetric rollers. This forming method has several advantages compared with line heating which is widely used to fabricate compound curved pieces in shipyards. The die-less forming, however, has scarcely been studied. Even the deformation mechanism in this forming process has not been understood clearly. So, in this paper, the deformation characteristics of die-less forming is investigated analytically and numerically. for the analytic investigation, slab method based on equilibrium equation is applied. And the mechanism of curvature generation is derived for the asymmetry in roller applied. And three dimensional numerical analyses are performed with realistic modeling of interactions between the rollers and work-piece using finite element program, ABAQUS. It is shown that curvature generation is mainly due to the difference of normal positive strain distribution between the top and bottom surface of the work-piece. And a convex-type curved plate is formed if the center region of the work-piece is rolled with asymmetric rollers of which the lower is larger than the upper in diameter.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.190-199
• /
• 2020

Globally, more super-tall buildings tend to be constructed competitively in the social and economic foundations. In the circumstance, this study is aimed at establishing a paradigm of super-tall buildings in terms of their various forms. Symbolizing a city or state, super-tall buildings not only are used as resources of tourism, but play an important role as a characteristic landmark. Therefore, it is necessary to find a curved form for a futuristic perspective. The purpose of this study is to infer the convergence relativity of curved forms among complex and diverse unstructured construction forms. This study used as subjects 50 super-tall buildings among the ranking data selected Council on Tall Buildings and Urban Habitat (CTBUH) in order for the basis of constructability related to actual design, rather than the way of recognizing a formative type, in the classification of curved forms into regularized surfaces, developable surfaces, and double-curved surfaces. The results of this study are presented as follows. This classification can be used as a fundamental material which is reasonably involved in the design process pursuing diverse curved surfaces in terms of design of tall buildings.