• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.384-388
• /
• 2019

In winter season, the snow and ice accretion on the bottom of the high speed railway rolling stock and boogie part has fallen at a high speed from the ballast section (gravel section for the transmission of the rolling stock load received by sleepers and fixing sleepers), causing the gravel to be scattered, thereby damaging the railway rolling stock structures and facilities. In order to solve these problems, the gravel scattering prevention net, manual de-icing, and movable hot air machine were used, but their efficiency was low. For the more efficient de-icing than ever before, an optimum material for de-icing fluid for high speed railway rolling stock was developed by evaluating the ice melting capacity, kinematic viscosity, evaporation of the material used as a chemical de-icing fluid. Four kinds of organic acid salts (sodium formate, sodium acetate, potassium formate and potassium acetate) and two different alcohols (propylene glycol, glycerol) were used as evaluation materials. Potassium formate, potassium acetate, and propylene glycol had similar ice melting capacities in the indoor test, but the propylene glycol showed the best ice melting capacity in spraying the system simulation test. This is because the kinematic viscosity of propylene glycol was 2.989029 St, which is higher than those of other materials therefore, it could stay longer on the ice and de-icing. In addition, potassium formate and potassium acetate were difficult to be used since the crystals precipitated and adversely affected the appearance of the rolling stock. The propylene glycol is the most optimum as an de-icing fluid for the high speed railway rolling stock.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.227-237
• /
• 2021

Artificial insemination of Korean native cattle (KNC) is the predominant method for breed improvement. However, industrialization of embryo production and transfer is necessary to utilize the genetic potential of KNC. The aim of this study was to examine associations between KNC donor cows and ovum pick-up (OPU) conditions, in-vivo oocyte recovery, and embryo development. Oocyte recovery and blastocyst development rates were higher at 50 and 60 mmHg OPU vacuum pressure than at 40 mmHg, which was, however, not significant. Regarding follicle growth, injection of 500 ㎍ GnRH 36 hours before OPU significantly increased the number of OPU oocytes from an average of 4.6 to 7.6 (P<0.05); no significant difference in embryo development rates was observed. Significant differences were observed in the numbers of OPU oocytes, embryo development rates, and transplantable blastocysts per individual among nine KNC donors (P<0.05). Furthermore, although there was no difference in OPU oocyte recovery intervals in approximately 2~8 weeks, the number of recovered oocytes significantly decreased at the 12-week interval (P<0.05); there was no difference in embryo development rates. The number of oocytes and embryonic development rates only tended to decrease until the seventh OPU session, but decreased significantly until the eighth session (P<0.05). The average pregnancy rate after transfer of OPU-derived in-vitro embryos into recipient cows was 41.8%. To improve the efficiency of OPU egg recovery and in-vitro embryo production, considering KNC donor characteristics, vacuum pressure of 60 mmHg, GnRH pretreatment to induce follicle growth, and effective OPU egg recovery up to seven times at intervals of 2~4 weeks appears to be most suitable. This study may facilitate the industrialization of KNC embryo production and transfer using high-quality cows.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.332-342
• /
• 2022

Kale (Brassica oleracea var. acephala) is one of the most frequently consumed leafy vegetables globally, as it contains numerous nutrients; essential amino acids, phenolics, vitamins, and minerals, and is particularly rich in glucosinolates. However, the differences in the biosynthesis of glucosinolates and related gene expression among kale cultivars has been poorly reported. In this study, we investigated glucosinolates profile and content in three different kale cultivars, including green ('Man-Choo' and 'Mat-Jjang') and red kale ('Red-Curled') cultivars grown in a vertical farm, using transcriptomic and metabolomic analyses. The growth and development of the green kale cultivars were higher than those of the red kale cultivar at 6 weeks after cultivation. High-performance liquid chromatography (HPLC) analysis revealed five glucosinolates in the 'Man-Choo' cultivar, and four glucosinolates in the 'Mat-Jjang' and 'Red-Curled' cultivars. Glucobrassicin was the most predominant glucosinolate followed by gluconastrutiin in all the cultivars. In contrast, other glucosinolates were highly dependent to the genotypes. The highest total glucosinolates was found in the 'Red-Curled' cultivar, which followed by 'Man-Choo' and 'Mat-Jjang'. Based on transcriptome analysis, eight genes were involved in glucosinolate biosynthesis. The overall results suggest that the glucosinolate content and accumulation patterns differ according to the kale cultivar and differential expression of glucosinolate biosynthetic genes.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.295-301
• /
• 2023

This study was conducted to determine the optimal dipping time and concentration of gibberellin for improving the growth and quality of domestic cultivar 'Seolhyang' strawberry when using runner plants. Strawberry runner plants were collected on November 10th and soaked in GA₃ concentrations of 50, 100, and 150 mg·L^-1 for 30 and 60 minutes, respectively. After 75 days of planting, the growth results showed that in the 30-minute, 50 mg·L^-1 treatment, the crown diameter was thicker and the T/R ratio was lower, indicating better plant vitality. Runner length increased with lower gibberellin concentrations, particularly promoting vegetative growth. Photosynthetic efficiency was more influenced by gibberellin concentration than dipping time, and using concentrations above a certain threshold acted as a stress factor for runner plants, leading to decreased photosynthetic efficiency. For enhancing seedling growth, soaking with 50 mg·L^-1 of gibberellin for 30 minutes was found to be optimal. This study verified the effects of gibberellin treatment on strawberry runner plants to improve plant growth and quality, providing useful basic data for using gibberellin.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.2
• /
• pp.128-134
• /
• 2008

Purpose: We prospectively evaluated the clinical usefulness of the patellar inferior pole (PIP) as a landmark of the anteromedial (AM) portal for the arthroscopic surgery of the medial mensiscus posterior horn (MMPH). Materials and Methods: Group 1 (50 normal left knees of adults), Group 2 (10 normal knees under anesthesia), and Group 3 (50 consecutive knees undergoing elective arthroscopic surgery for relatively simple intraarticular pathologies, or diagnostic arthroscopy) were included. In Group 1 and 2, the true lateral (A) and valgus stress lateral radiographs (B) on $30^{\circ}$ flexion were obtained, and the lines (AM portal line) passing through the PIP and distal-most medial femoral condyle (MFC) were drawn under the condition without considering the thickness of articular cartilage of MFC (1, 2-A, B group), and considering it as 2.5mm on B (1, 2-C group). Then, we investigated the meeting point of the AM portal line with medial tibial plateau (C-D percentage), and measured the distance between the PIP and the anterior joint line (E-length), and medial tibial-femoral joint space (F-length). In Group 3, the AM portal was made at the PIP level and clinical usefulness of the approach to the MMPH and body of the lateral meniscus (LM) was analyzed. Results: The average C-D percentage came out as 85.8, 101.3, 69.1% for each Group 1-A, B, C, and 102.4, 144.6, 116.8% for each Group 2-A, B, C. Measured E-length was an average of 15.1 (Group 1-A), 15.5 (Group 1-B, C), 13.1 (Group 2-A), and 12.9 mm (Group 2-B, C) and the change by valgus stress had no statistical significance. The F-length increased about 1.2 (Group 1) and 3.6 mm (Group 2) when valgus stress was applied, which had statistical significance (p<0.001, p<0.001). In Group 3, 49, 48 knees were classified as good for the MMPH, and the body of LM in aspect of the clinical usefulness of AM portal made on the PIP level. Conclusion: We identified the clinical usefulness of the PIP as a skin landmark of AM portal for the arthroscopic surgery of the MMPH.

• Food Science of Animal Resources
• /
• v.32 no.4
• /
• pp.497-503
• /
• 2012

This study was performed in order to evaluate the antioxidant activities of red beet extracts as well as the physicochemical properties and microbial changes of pork patties containing red beet during refrigerated storage. Red beet was extracted with water and ethanol. Red beet water extracts (RBW) and red beet ethanol extracts (RBE) were diluted with various concentrations (0.05~1.0%). DPPH radical scavenging activity and iron chelation activity of RBW showed a higher level than those of RBE (p<0.05). In particular, the iron chelation activity of RBW was over 53.4% at all levels. In addition, RBW at 1% had nearly 100% activity. On the other hand, the reducing powers of RBE were higher than those of RBW (p<0.05), and the antioxidant activity on linoleic acid emulsion of RBW was over 83% at all levels. Based on these model studies, 0.5% levels of RBW and RBE were added to ground pork patties (GPP), and the physicochemical properties and microbial changes of red beet GPP were evaluated during storage (0~14 d) at $4^{\circ}C$. The pH and microbial counts increased with increased storage time (p<0.05). Pork patties with BHT showed the lowest thiobarbituric acid reactive substances (TBARS) and microbial counts, and those with red beet had lower TBARS than the control (p<0.05). These results indicated that both red beet water and ethanol extracts could be used as natural antioxidants of pork patties during storage.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.6-15
• /
• 1997

This paper presents the multi-objective optimal design of thermopile sensor having beam or membrane structure. The thermopile sensor is composed of $Si_{3}N_{4}/SiO_{2}$ dielectric membrane, Al-polysilicon thermocouples and $RuO_{2}$ thin film for black body. The sensing method is based on the Seebeck effect which is originated from the temperature difference of the two positions, black body and silicon rim. The objective functions of the presented design are sensitivity, detectivity and thermal time constant. The modelling of the sensor is proposed including the package. The multi-objective optimization technique is applied to the design of the sensor not only inspecting the modelling equation but also simulating mathematical programming method. Especially, fuzzy optimization technique is adapted to get the optimal solution which enables the designer to reach the more practical solution. The design constraint of the voltage output originated from the change of the environmental temperature is included for practical use.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.31-38
• /
• 2011

This study was conducted to build frameworks for a guideline of community forest projects with respect to ODA of Korea (Official Development Assistant) in forest fields. Community forestry is a worldwide phenomenon which began in developing countries such as Nepal, Gambia, Guinea, and Indonesia and has been gradually recognized as an effective measure for ODA in forestry areas from ODA/DAC countries and the other international donors. This study investigated types of community forest status, mechanisms of community forest project conducted by ODA/DAC countries or the other international donors, and CFM (Community Forest management) success factors. As a result of our study, there are different types of resource users, having different economic and social status, perspectives, knowledge systems, values, understandings and objectives in community based forestry. Consequently, the clear forest tenure systems enabling communities to get motivated for the projects, the most appropriate agroforestry systems in different countries, capability of community to manage forest and etc must be considered carefully when the community forest project are implemented for ODA of Korea in order to gain successful results from ODA in forestry fields.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.68-78
• /
• 2012

A layout of an LNG FPSO should be elaborately determined as compared with that of an onshore plant because many topside process systems are installed on the limited area; the deck of the LNG FPSO. Especially, the layout should be made as multi-deck, not single-deck and have a minimum area. In this study, a multi-floor layout for the liquefaction process, the dual mixed refrigerant(DMR) cycle, of LNG FPSO was determined by using the optimization technique. For this, an optimization problem for the multi-floor layout was mathematically formulated. The problem consists of 589 design variables representing the positions of topside process systems, 125 equality constraints and 2,315 inequality constraints representing limitations on the layout of them, and an objective function representing the total layout cost. To solve the problem, a hybrid optimization method that consists of the genetic algorithm(GA) and sequential quadratic programming(SQP) was used in this study. As a result, we can obtain a multi-floor layout for the liquefaction process of the LNG FPSO which satisfies all constraints related to limitations on the layout.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.58-63
• /
• 2020

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.