• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.3
• /
• pp.125-140
• /
• 2018

According to statistics, it is shown that domestic SMEs rely on bank loans for the majority of fund procurement. From financial information shortage (Thin file) that does not provide information necessary for credit evaluation from banks such as financial statements. In order to overcome these problems, recently, in alternative finance such as P2P, using differentiated information such as demographics, trading information and the like utilizing Fintech instead of existing financial information, small funds A new credit evaluation method has been expanding to provide SMEs with small amounts of money. In this paradigm of environmental change, in this research, credit evaluation which can expand fund supply to SMEs by utilizing big data based on trade area information such as sales fluctuation, location conditions etc. In this research, we try to find such a solution. By analyzing empirically the big data generated in the trade area, we verify the effectiveness as a credit evaluation factor and try to derive the main parameters necessary for the business performance evaluation of the founder of SMEs. In this research, for 17,116 material businesses in Seoul City that operate the service industry from 2009 to February 2018, we collect trade area information generated for each business location from Big Data specialized company NICE Zini Data Co., Ltd.. We collected and analyzed the data on the locations and commercial areas of the facilities that were difficult to obtain from SMEs and analyzed the data that affected the Corporate financial Distress. It is possible to refer to the variable of the existing unused big data and to confirm the possibility of utilizing it for efficient financial support for SMEs, This is to ensure that commercial lenders, even in general commercial banks, are made to be more prominent in one sector of the financing of SMEs. In this research, it is not the traditional financial information about raising fund of SMEs who have basically the problem of information asymmetry, but a trade area analysis variable is derived, and this variable is evaluated by credit evaluation There is differentiation of research in that it verified through analysis of big data from Trading-area whether or not there is an effect on.

• Clinical and Experimental Pediatrics
• /
• v.49 no.6
• /
• pp.653-658
• /
• 2006

Purpose : Because voiding cystourethrography(VCUG) is an invasive method, we studied whether VCUG could be postponed through evaluation of alternative non-invasive tests including renal ultrasonography and $^{99m}Tc$-DMSA renal scan. Methods : We reviewed the medical records of 175 patients initially diagnosed with febrile urinary tract infection during the one year period of 1999, and compared 3-tests : renal ultrasongraphy, $^{99m}Tc$-DMSA renal scan, and VCUG. Results : Renal ultrasonography didn't contribute to the prognostication of pyelonephritis(photopenic areas) or vesicoureteral reflux(VUR). Presentation of photopenic areas in $^{99m}Tc$-DMSA renal scan was related to VUR. If both findings of renal ultrasonography and $^{99m}Tc$-DMSA renal scans were normal, this condition was closely related to normal results in VCUG. And if both examinations were abnormal, the condition was closely related to VUR. But this state could not always guarantee the normal result from VCUG because of low sensitivity in finding VUR. Conclusion : In cases in which acute phyelonephritis is demonstrated by $^{99m}Tc$-DMSA renal scan, VCUG is required. In addition to this, if the conditions of hydronephrosis, vesicoureteral dilatation, increases of renal volume, and changes of echogenesity are shown by renal ultrasonography, VCUG should be performed. If a patient has difficulty undergoing VCUG, temporary postponement of VCUG can be taken into consideration, but only in cases where both examinations of renal ultrasonography and $^{99m}Tc$-DMSA renal scan are normal. Nevertheless, close observation is be advised even in this case.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.449-455
• /
• 2017

Process input data including material and energy, process output data including product, co-product and its environmental emissions of the reference and target processes were collected and analyzed to evaluate the process performance. Environmentally problematic input/environmental emissions of the manufacturing processes were identified using these data. Significant process inputs contributing to each of the environmental emissions were identified using multiple regression analysis between the process inputs and environmental emissions. Optimum combination of the end-of-pipe technologies for treating the environmental emissions considering economic aspects was made using the linear programming technique. The cement manufacturing processes in Korea and the EU producing same type of cement were chosen for the case study. Environmentally problematic input/environmental emissions of the domestic cement manufacturing processes include coal, dust, and $SO_x$. Multiple regression analysis among the process inputs and environmental emissions revealed that $CO_2$ emission was influenced most by coal, followed by the input raw materials and gypsum. $SO_x$ emission was influenced by coal, and dust emission by gypsum followed by raw material. Optimization of the end-of-pipe technologies treating dust showed that a combination of 100% of the electro precipitator and 2.4% of the fiber filter gives the lowest cost. The $SO_x$ case showed that a combination of 100% of the dry addition process and 25.88% of the wet scrubber gives the lowest cost. Salient feature of this research is that it proposed a method for identifying environmentally problematic input/environmental emissions of the manufacturing processes, in particular, cement manufacturing process. Another feature is that it showed a method for selecting the optimum combination of the end-of-pipe treatment technologies.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2009

Purpose: Nowadays in the nuclear medicine, many studies and efforts are being made to reduce the scan time, as well as the waiting time to be needed to execute exams after injection of radionuclide medicines. Several methods are being used in clinic, such as developing new radionuclide compounds that enable to be absorbed into target organs more quickly and reducing acquisition scan time by increase the number of Gamma Camera detectors to examine. Each medical equipment manufacturer has improved the imaging process techniques to reduce scan time. In this paper, we tried to analyze the difference of image quality between FBP, 3D OSEM reconstruction methods that commercialized and being clinically applied, and Astonish reconstruction method (A kind of Iterative fast reconstruction method of Philips), also difference of image quality on scan time. Material and Methods: We investigated in 32 patients that examined the Bone SPECT from June to July 2008 at department of nuclear medicine, ASAN Medical Center in Seoul. 40sec/frame and 20sec/frame images were acquired that using Philips‘ PRECEDENCE 16 Gamma Camera and then reconstructed those images by using the Astonish (Philips’ Reconstruction Method), 3D OSEM and FBP methods. The blinded test was performed to the clinical interpreting physicians with all images analyzed by each reconstruction method for qualitative analysis. And we analyzed target to non target ratio by draws lesions as the center of disease for quantitative analysis. At this time, each image was analyzed with same location and size of ROI. Results: In a qualitative analysis, there was no significant difference by acquisition time changes in image quality. In a quantitative analysis, the images reconstructed Astonish method showed good quality due to better sharpness and distinguish sharply between lesions and peripheral lesions. After measuring each mean value and standard deviation value of target to non target ratio with 40 sec/frame and 20sec/frame images, those values are Astonish (40 sec-$13.91{\pm}5.62$ : 20 sec-$13.88{\pm}5.92$), 3D OSEM (40 sec-$10.60{\pm}3.55$ : 20 sec-$10.55{\pm}3.64$), FBP (40 sec-$8.30{\pm}4.44$ : 20 sec-$8.19{\pm}4.20$). We analyzed target to non target ratio from 20 sec and 40 sec images. And we analyzed the result, In Astonish (t=0.16, p=0.872), 3D OSEM (t=0.51, p=0.610), FBP (t=0.73, p=0.469) methods, there was no significant difference statistically by acquisition time change in image quality. But FBP indicates no statistical differences while some images indicate difference between 40 sec/frame and 20 sec/frame images by various factors. Conclusions: In the circumstance, try to find a solution to reduce nuclear medicine scan time, the development of nuclear medicine equipment hardware has decreased while software has marched forward at a relentless. Due to development of computer hardware, the image reconstruction time was reduced and the expanded capacity to restore enables iterative methods that couldn't be performed before due to technical limits. As imaging process technique developed, it reduced scan time and we could observe that image quality keep similar level. While keeping exam quality and reducing scan time can induce the reduction of patient's pain and sensory waiting time, also accessibility of nuclear medicine exam will be improved and it provide better service to patients and clinical physician who order exams. Consequently, those things make the image of department of nuclear medicine be improved. Concurrent Imaging - A new function that setting up each image acquisition parameter and enables to acquire images simultaneously with various parameters to once examine.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.62-79
• /
• 2020

The rock-carved seated Avalokiteśvara statue at Ganghwa Bomunsa Temple is a giant rock-carved Buddhist statue that was built in 1928 during the Japanese colonial era. Although it is a year-recorded Buddhist statue that occupies a prominent place in modern Korean Buddhist sculpture history, it has not been the subject of in-depth discussion due to weak research on modern Buddhist sculptures. In this study, to examine the various significant aspects of the rock-carved Seated Avalokiteśvara statue at Bomunsa Temple as a modern Buddhist sculpture, I have managed to determine its construction year, artificers, and patrons by deciphering the inscription around the rock-carved statue; in addition I have researched the effects of the rock shapes and landforms on the formation of the Buddhist statue by comparing and analyzing the points of view of both artificers and worshipers. I have also identified the specific circumstances of the time of construction from interviews with the descendants of artificers. A monk from Geumgangsan Mountain, Lee Hwaeung, took the role of sponsor and chief painter to construct the rock-carved seated Avalokiteśvara statue at Bomunsa temple. In the beginning of its construction in 1928, more than 100 donators jointly sponsored the construction of the statue. Gansong Jeon Hyoungphil sponsored alone at the time of the place of worship's expansion in 1938. Bomunsa Temple has been regarded as one of the top-three sacred places of Avalokiteśvara Bodhisattva together with Naksansa Temple in Yang Yang and Boriam in Nam Hae, due to the construction of the rock-carved statue. It took about three months to construct the statue. Lee Hwaeung drew a rough sketch and then Un Songhag and five masons from Ganghwa Island took part in the carving process. We can observe the line drawing technique around the rock-carved statue because the statue was carved based on the rough sketch of the monk painter. The aspect of Lee Hwaeung as a painter is revealed; therefore, we can identify the clue of painting pattern leading to Seogongchulyou- Hwaunghyoungjin- Ilonghyegag. The rock-carved seated Avalokiteśvara statue at Bomunsa Temple is a typical Avalokiteśvara that wears a jeweled crown and holds Kundica. It makes a strong impression as it has a big square-shaped face and a short neck and is unsophisticated in general. The artificers solved the issue of visual distortion of the rock-carved statue caused by carving on a 10-meter high and 40-degree sloping rock by controlling motion to its maximum, omitting detailed expression by emphasizing symmetry, and adjusting the head-to-body proportion to be almost one-to-one. In this study, especially, I presume the unified form of sacred sculptures and Buddhist altars, without making a Buddhist altar like the rock-carved seated Avalokiteśvara statue at Bomunsa Temple, to be a key characteristic of modern Buddhist sculptures. Furthermore, I make newly clear that the six letters of Sanskrit carved on nimbus, which had been interpreted as a Six-Syllable Mantra, are a combination with Jeongbeopgye and Sabang Mantras. In addition, three iron rings driven on eaves rock were used as a reference point, and after construction they were used as a decoration for the Bodhisattva with hanging wind chimes.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1037-1051
• /
• 2020

The accurate monitoring and forecasting of the intensity of tropical cyclones (TCs) are able to effectively reduce the overall costs of disaster management. In this study, we proposed a multi-task learning (MTL) based deep learning model for real-time TC intensity estimation and forecasting with the lead time of 6-12 hours following the event, based on the fusion of geostationary satellite images and numerical forecast model output. A total of 142 TCs which developed in the Northwest Pacific from 2011 to 2016 were used in this study. The Communications system, the Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) data were used to extract the images of typhoons, and the Climate Forecast System version 2 (CFSv2) provided by the National Center of Environmental Prediction (NCEP) was employed to extract air and ocean forecasting data. This study suggested two schemes with different input variables to the MTL models. Scheme 1 used only satellite-based input data while scheme 2 used both satellite images and numerical forecast modeling. As a result of real-time TC intensity estimation, Both schemes exhibited similar performance. For TC intensity forecasting with the lead time of 6 and 12 hours, scheme 2 improved the performance by 13% and 16%, respectively, in terms of the root mean squared error (RMSE) when compared to scheme 1. Relative root mean squared errors(rRMSE) for most intensity levels were lessthan 30%. The lower mean absolute error (MAE) and RMSE were found for the lower intensity levels of TCs. In the test results of the typhoon HALONG in 2014, scheme 1 tended to overestimate the intensity by about 20 kts at the early development stage. Scheme 2 slightly reduced the error, resulting in an overestimation by about 5 kts. The MTL models reduced the computational cost about 300% when compared to the single-tasking model, which suggested the feasibility of the rapid production of TC intensity forecasts.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.350-363
• /
• 2009

Inter- and intra-specific differences in removal activities, filtering rates (FR) and production of feces-and pseudo-feces (PF) between a native freshwater bivalve in Korea, Anodonta woodiana Lea and Unio douglasiae Griffith et Pidgeon, were compared using a continuous removal of organic matters (CROM) system. The CROM system comprised five steps; input of polluted water, control of water flow, mussel treatment, analysis of water quality and discharge of clean water. The study was designed to compare the removal activity of organic matters between A. woodiana and U. douglasiae, and the intra-specific differences between density and length in A. woordiana. Results clearly indicate that two kinds of mussels had obvious removal activities of seston in the eutrophic reservoir. First, if both are similar in shell length, there were no significant inter-specific differences in removal activity between A. woordiana and U. douglasiae (P>0.5), but FRs of U. douglasiae was relatively high due to low ash-fee dry weight. Second, if both are same in animal density, the smaller mussels (1$\sim$2 years old) showed a higher filtering rate and production of feces- and pseudo-feces and less release of ammonium than the larger mussels. Third, if both are same in biomass, FRs and PF of mussels were higher in the low-density tank than the high-density tank, While the Concentration of $NH_4$-N and $PO_4$-P released WRS similar to each other (P>0.5). Therefore, these results suggest that CROM system using a young bivalve A. woordiana can be applied to control the nuisance seston in eutrophic lake system, if a relevant species and density were selected. Additional pilot tests to optimize the age and density of domestic bivalves were needed for the generalization of CROM operation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.161-169
• /
• 1999

This paper describes the swimming and escaping behavior of amber fish, Seriola aureovittata released in the first bag net of the setnet and observed with telemetry techniques. The setnet used in experiment is composed of a leader, a fish court with a flying net and two bag nets having ramp net. The behavior of the fish attached an ultrasonic depth pinger of 50 KHz is observed using a prototype LBL fish tracking system. The 3-D underwater position ofthe fish is calculated by hyperbolic method with three channels of receiver and the depth of pinger. The results obtained are as follows: 1. The fish released on the sea surface was escaped down to 15 m depth and rised up to near the sea surface during 5 minutes after release. The average swimming speed of the fish during this time was 0.87 m/sec. 2. The swimming speed of the fish is decreased slowly in relation to the time elapsed and the fish showed some escaping behavior forward to the fish court staying 1 to 7 m depth layer near the ramp net. The average speed of the fish during this time was 0.52 m/sec. 3. During 25 minutes after beginning of hauling net, the fish showed a faster swimming speed than before hauling and an escaping behavior repeatedly from the first ramp net to the second one in horizontal. In vertical, the fish moved up and down between the sea surface and 20 m depth. After this time, the fish showed the escaping behavior forward to fish court after come back to the first ramp net in spite of the hauling was continued. It is found that the fish was escaped from the first ramp net to the fish court while the hauling was carried out. The average speed of the fish after beginning of hauling was 0.72 m/sec which increased 38.5 ％ than right before the hauling and showed 0.44 to 0.82 m/see of speed till escaping the first bag net. The average swimming speed during observation was 0.67 m/sec (2.2 times of body length).

• Applied Microscopy
• /
• v.32 no.1
• /
• pp.67-80
• /
• 2002

This study was carried out to investigate the effects of deer antler extract on the regeneration of peripheral nerves. Sprague-Dawley male rats weighing about 300 gm were fed deer antler extract for 1, 2, and 3 weeks per oral (1.5 ml/100 gm B.W.), respectively, once a day and transected both sides of sciatic nerve of each leg. After keeping for 6 hours, sciatic nerves taken from proximal part of transected region were treated with conventional transmission electron microscopical method and then observed with electron microscope. The results obtained were summarized as follows; 1. Sciatic nerves of normal control group were not showing any sprouts and electron dense axolemmal projections were frequently observed. 2. Sciatic nerves of saline treated groups were showing axonal sprouts at the nodes of Ranvier. The length of them was usually short, and numerous vesicles, vacuoles and organelles including neurofilament were contained. The number of nodes of Ranvier containing sprouts from 100 longitudinal sectioned nerve fibers was 29 (29%) in 1 week treated group, 32 (32%) in 2 weeks treated group, and 30 (30%) in 3 weeks treated group, respectively. 3. Sciatic nerves of deer antler treated groups were showing axonal sprouts at the node of Ranvier as well. Although most of the sprouts were short, some sprouts of 2 weeks and 3 weeks treated groups were quite long. Sprouts usually contained numerous vesicles, vacuoles and cell organelles such as neurofilaments and mitochondria. The number of nodes of Ranvier containing sprouts from 100 longitudinal sectioned nerve fibers was 38 (38%) in 1 week treated group, 46 (46%) in 2 weeks treated group, and 48 (48%) in 3 weeks treated group respectively. The results described above explain pretreatment of deer antler extract improves the sprout formation of transected sciatic nerves, and then it suggests deer antler may be effective for the regeneration of peripheral nerves.

• Journal of the Korean Home Economics Association
• /
• v.37 no.5
• /
• pp.61-84
• /
• 1999

The purpose of this study is to understand the context of cosumers' lives in Korea with a narrative analysis method. The epistemological orientation of eh narrative analysis is Interpretivism, which blends the two polar philosophical perspectives, Empiricism and Rationalism, and includes Narrotology, Hermeneneutics, Semiotics, and Structural Criticism. Narrative analysis takes as its object of investigation the story itself. This study collects eleven narrative plots from four housewives, into which Labov's structural approach is applied. This study shows clearly that the socio-cultural environment in which consumers live has strong influence on their consumption behavior and also reveals that narrativization tells not only about past actions but how individuals understand those actions, that is, meaning.