• Journal of Radiation Protection and Research
• /
• v.31 no.3
• /
• pp.141-148
• /
• 2006

Surveys of radioactive contamination were performed for imported foodstuffs in 2003. The following samples among imported foodstuffs were selected from markets and Korea Food and Drug Administration(KFDA); the imported samples from country associated with the Chernobyl nuclear accident, the samples produced around the nuclear power plants or nuclear tests, the foodstuffs reported as radioacitive contamination materials in foreign country. After pretreatments such as drying and homogenization, samples were analyzed. The $^{137}Cs$ radionuclide was only measured among the regulation radionuclides($^{137}Cs,\;^{134}Cs,\;^{131}I$) of food code. All foodstuffs except Inonotus Obliquus(Chaga mushooms) are less than 17.0 Bq/kg or below the minimum detectable activity(MDA). The activity concentrations of Chaga mushrooms from Russia ranged up to 131.25 Bq/ltg which is almost 35 % of the maximum permitted level of food code. The fraction of imported foodstuffs having meaningful radioactivity is small, however, the radioactive contamination survey of imported foodstuffs is still needed.

• The Journal of Society for e-Business Studies
• /
• v.20 no.3
• /
• pp.89-112
• /
• 2015

Recently, the business environment of healthcare has changed rapidly due to the entering the mobile era, the intensifying global competition, and the explosion of healthcare needs. Despite of necessity in expanding new IT-based medical services and investing IT resources to respond environmental changes, the small and medium sized hospitals could not realize these requirements due to the limited management resources. CHISSMH is designed and presented in this research to provide high valued clouding medical services with reasonable price. CHISMH is designed and presented in this research to provide high valued medical services with reasonable price through cloud computing. CHISME is designed to maximize resource pooling and sharing through the visualization. By doing so, Cloud Service provider could minimize maintenance cost of cloud data center, provide high level services with reasonable pay-per-use price. By doing so, Cloud Service provider could minimize maintenance cost of cloud data center, and could provide high level services with reasonable pay-per-use price. CHISME is expected to be base framework of cloud HIS services and be diffusion factor of cloud HIS services Operational experience in CHISSMH with 15 hospitals is analyzed and presented as well.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.537-541
• /
• 2005

Estimation of concentrations of PAHs [benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene] in cereals, pulses, potatoes, and their products available in Korean markets gave mean levels of 0.13, 0.08, 0.06, 0.03, 0.08, 0.15, 0.45, and $0.14{\mu}g/kg$, respectively, with recoveries between 82.6-106.6%. Methodology involved saponification and extraction with n-hexane, purification on Sep-Pak Florisil cartridges, and high performance liquid chromatography using a fluorescence detector.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.561-567
• /
• 2003

This study was conducted to estimate the heavy metal contents in various foods (n=696). The contents of lead (Pb), cadmium (Cd) and tin (Sn) were determined using and ICP (inductively coupled plasma spectrometer). The content of mercury (Hg) was determined using a mercury analyzer. The values of heavy metals in canned foods were as follows [minimum-maximum (mean), mg/kg]; Pb 0.001${\sim}$0.36 (0.10), Cd 0.001${\sim}$0.10 (0.04), Sn 0.01${\sim}$24.75 (2.60). The mean values of Pb and Cd in animal foods were 0.40 mg/kg and 0.03 mg/kg. Also, the mean values of heavy metals in vegetables and potatoes were 0.03 mg/kg for Pb, 0.02 mg/kg for Cd, 0.001 mg/kg for Hg, respectively. The mean values of Hg in fishes and canned fishes were 0.08 mg/kg and 0.04 mg/kg. Our results showed that heavy metal contents in various foods available on markets were similar to those reported in other countries.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.748-751
• /
• 2003

Acrylamide is considered as potential carcinogen and genotoxicant. Swedish National Food Administration reported that acrylamide was detected in heat treated starch rich food products. Acrylamide formation during food processing was confirmed by researchers of other countries including UK, Norway, Japan, Switzerland, and United States. It is noticed that the formation of acrylamide in potato products was greater than other food products. It may be due to high concentration of asparagine and glucose in potato products comparing to those of other food products. Interaction between asparagine and glucose during heat treatment resulted in acrylamide formation via Maillard reaction. Analytical method (LC-MS/MS) adopted by FDA was performed to monitor acrylamide concentrations in domestic food products. Acrylamide quantitation in several food categories, such as raw materials, boiled foods, fried foods, hardtacks, breads, breakfast cereals, potato chips, french fries, biscuits, and others, were carried out.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1415-1419
• /
• 1998

In order to evaluate the safety of greenhouse horticultures, a large number sample sources were collected, and the fungi of Aspergillus sp. and Penicillium sp. were isolated from them. Indirect competitive ELISA method and high performance liquid chromatography (HPLC) were applied to confirm the ochratoxin A producing abilities of isolated strains. One hundred ninety two sample sources including soil, pepper, strawberry and water mellon were collected for fungi isolation from western Gyeongnam, Andong and Gyeongbok. One hundred forty two strains of Aspergillus sp. and one hundred fifty three strains of Penicillium sp. were isolated respectively from them. The isolated fungi were tested for the production of ochratoxin A by ELISA. After culture of them on the modified sucrose low salt medium at $28^{\circ}C$ for 15 days, we found that five strains of Penicillium sp. produced ochratoxin A at the levels of $0.084{\sim}2.128\;{\mu}g/mL$. Among them, #129-2 strain isolated from water melon, showed the highest level of ochratoxin A as $2.128\;{\mu}g/mL$ broth. However, all of isolated Aspergillus sp. didn't produce ochratoxin A. When we compared the results of ELISA method with HPLC method, ochratoxin A production of each isolated strains showed very similar levels.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.292-302
• /
• 2005

Condition of Ion-Trap gas chromatography-mass spectrometry (GC-MS) for rapid screening of 206-pesticides residues in agricultural foodstuffs was optimized. As applying a wide-bore column (10 m${\times}$0.53 mm, DF 0.25 um) connected with a fused silica restrictor (0.6 m${\times}$0.1 mm), a significant retention time reduction was obtained. Additionally, the shape of peaks was sharper and higher than classical GC's and GC-MS's, which allowed lower detection limits. To easily manage many spectral data, both of Electron Ionization(EI) and Chemical Ionization(CI) techniques were adopted in screening procedure. At the following steps, MS-MS technique were used to confirm screened analytes in complicated matrices.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1103-1109
• /
• 2002

Mean concentration and daily intake of sorbic acid were estimated through the analysis of food samples obtained from Korea FDA and food sanitation inspection agency during $1999{\sim}2000$. Total number of samples were 14,129, among which the number of detected samples were 2,561 (detection rate was 18.13%). Contribution rate to total estimated daily intake (%) of sorbic acid in the categorized food were the highest in processed fish product. Total estimated daily intake $({\Sigma}EDI)$ for age groups were the highest in $30{\sim}49$ years old and ranged from 3.42 to 9.25 mg/person/day. Estimation of average food intake for each food item per person per day was based on data in national nutrition survey and national food disapperance data in 1998. Total estimated daily intake of sorbic acid was 20.40 mg per body weight of 55 kg. This value was 1.48% of acceptable daily intake evaluated by FAO/WHO and 33.03% of theoretical maximum daily intake.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.992-997
• /
• 2002

Contents of heavy metals in sugar products were estimated to provide a scientific basis for standardization of Korea Food Code of heavy metals. The contents of mercury (Hg), lead (Pb), cadmium (Cd), arsenic (As) and copper (Cu) were determined in 285 sugar product samples using a mercury analyzer, atomic absorption spectrophotometer, and inductively coupled plasma spectrometer. The values of heavy metals in sugar products $[minimum{\sim}maximum\;(mean),\;mg/kg]$ were as follows: $Hg,\;N.D.{\sim}0.006 (0.001);$ $Pb,\;N.D.{\sim}0.47 (0.03);$ $Cd,\;N.D.{\sim}0.06(0.005);\;As,\;N.D.{\sim}0.10(0.004);\;Cu,\;N.D.{\sim}1.89(0.15)$. These results show that metal contents of domestic sugar products are similar to those reported in other countries. Weekly average intakes of lead, cadmium, and mercury from sugar products were $0.004{\sim}0.1%$ of Provisional Tolerable Weekly Intake set by FAO/WHO Joint Food Additives and Contaminants Committee to evaluate the safeties of sugar products.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.141-152
• /
• 2008

The 3D building modeling is one of crucial components in constructing 3D geospatial information. The existing methods for 3D building modeling depend mainly on manual photogrammetric processes, which indeed take great amount of time and efforts. In recent years, many researches on 3D building modeling using aerial LiDAR data have been actively performed to aim at overcoming the limitations of existing 3D building modeling methods. Either techniques with interpolated grid data or data fusion with digital map and images have been investigated in most of existing researches on 3D building modeling with aerial LiDAR data. The paper proposed a method of 3D building modeling with LiDAR data only. Firstly, octree-based segmentation is applied recursively to LiDAR data classified as buildings in 3D space until there are no more LiDAR points to be segmented. Once octree-based segmentation is completed, each segmented patch is thereafter merged together based on its geometric spatial characteristics. Secondly, building model components are created with merged patches. Finally, a 3D building model is generated and composed with building model components. The experimental results with real LiDAR data showed that the proposed method was capable of modeling various types of 3D buildings.