• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1059-1060
• /
• 2008

In this paper, using a genetic algorithm, consisting of six to seven degrees of freedom links, walking robot to up-stair that can walk to optimize energy and stability to generate. Walking robot to up-stairs of the four-step segmentation of the various situations that match the pace and pattern so that it can generate. It also generated using genetic algorithms to test for Matlab into the Robot Simulation of the humanoid experiment was used.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.309-311
• /
• 2006

This paper aims to provide a way to improve dynamic stability of biped robots against undesirable disturbances. By using an angular velocity sensor on its shoulder, we can make a medium-sized biped robot walk stably against an impulsive disturbance. The measured signal from the sensor in used for compensating the reference angles of ankle, knee, and pelvis joints. An experiment shows that the stability of the robot is much enhanced by using a cheap sensor and simple algorithm. This kind of research helps biped robots walk more stably in real environments.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.312-314
• /
• 2006

Researches on biped robot walking have been mostly focusing on walking on even surfaces. Therefore, robot walking has been only realized on pre-specified spaces with pre-specified movements according to the previous researches. In this paper a walking system for a biped robot using fuzzy system and neural networks to overcome those constraints. The system enables biped walking to be possible in various environments and with more complicated obstacels. For the purpose, a walking robot should recognize its surrounding environment and determine its movement. In the proposed system, a robot dynamically generates its walking trajectories of each joint by using neural networks when facing new obstacle such as stairs, and it maintains its walking stability by using closed loop fuzzy control system which manipulates the waist joints.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.169-172
• /
• 2002

This paper is concerned with walking trajectory generation by applying the genetic algorithm. The walking trajectory is generated though three via-points and genetic algorithm is employed to find velocity and acceleration at each via-point. Also genetic algorithm is applied for balancing joint trajectory. Fitness function is used for minimizing the trajectory. As a result, new algorithm generated the smooth trajectory. The proposed algorithm is verified by the experiment of biped walking robot developed in our Control laboratory, and we compared the result with the previous walking algorithm. It showed that the new proposed algorithm generated the better walking trajectory.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2433-2435
• /
• 2002

The purpose of this paper is to introduce a case study of developing a miniature biped robot. The biped robot has a total of twenty-one degrees of freedom(DOF) ; There are two legs which have six DOF each, two arms which have three DOF each and a waist which has three DOF. RC servo-motors were used as actuators. We have developed motor controller, sensor controller and ISA-interface card. Motor controller, PWM generator, can control eight motors Sensor controller is connected to eight FSR(Force Sensing Resistors). For high level controller communicate with low level controller, ISA-interface card has developed. For the stable walking, CMAC(Cerebellar Model Articulation Controller) neural network algorithm is applied to our system CMAC is robust at noise.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2804-2807
• /
• 2000

This paper suggests a method of the forward dynamic analysis for the computer simulation on the analysis of the dynamic behavior for biped walking robot. The equations f motion of the system or the simulation are constructed by using the Method of the multibody dynamics which is powerful method for modeling of the complex biped system. For the simplicity of simulation, we consider that the sole of the contacting foot is affected by the reaction forces for tree structure system topology instead of the addition or deletion of the kinematic constraints. The ground reaction forces can be modeled using the simple spring and damper model at the three contacting points on the sole of the foot. For minimizing the errors of numerical integration, the number of equations of motion is minimized by adding the driving constraints or a controller instead of the direct driving torques.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.2
• /
• pp.83-88
• /
• 2006

This paper proposes a method that minimizes the consumed energy by searching the optimal locations of the mass centers of the biped robot's links using Genetic Algorithm. This paper presents a learning controller for repetitive gait control of the biped robot. The learning control scheme consists of a feedforward learning nile and linear feedback control input for stabilization of learning system. The feasibility of learning control to the biped robotic motion is shown via computer simulation and experimental results with 24 DOF biped walking robot.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.998-1001
• /
• 2003

In this paper, a entertainment biped robot controlled by R/C servo motors is built using the embedded RTOS (Real Time Operating System). uC/OS-II V2.00 is used for RTOS and control algorithm of R/C servo motors is proposed based on uC/OS-II's preemptive and deterministic property without any extra PWM module. The realized biped robot has 19 DOF, and a board 80C196KC as main CPU. To verify the proper walking process, ZMP(Zero Moment Point) theory is applied and ADAMS is used for simulation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1764-1766
• /
• 2007

This paper aims to generate the static walking pattern of a biped robot on stairs and to show the effectiveness of the proposed algorithm using its ankle and pelvis. Differently from the previous biped robots, our biped robot has the peculiar mechanism on its ankle and pelvis. By using this mechanism, we can reduce the load in the knee when a biped robot ascends the stairs. This means that a biped robot can climb up a higher step. The stairs walking trajectory that is separated into a ankle trajectory and a pelvis trajectory is generated by cubic spline interpolation. Finally, we confirm the feasibility of the proposed algorithm through the computer simulation and the real walking experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.928-931
• /
• 1996

It is necessary to develop the simulator for the test of stability and torque before the walking experiment of biped robot, because a robot may be damaged in an actual experiment. This thesis deals with the development of three-dimensional simulator for improving efficiency and safety during development and experimentation. The simulator is composed of three parts-solving dynamics, rendering pictures and communicating with the robot. In the first part, the D-H parameter and parameter of links can be loaded from the file and edited in the program. The results are obtained by using the Newton-Euler method and are stored in the file. Through the above process, the proper length of link and driving force can be found by using simulator before designing the robot. The second part is organized so that the user can easily see a specific value or a portion he wants by setting viewing parameters interactively. A robot is also shown as a shaded rendering picture in this part. In the last part, the simulator sends each desired angle of joints to the robot controller and each real angle of joints is taken from the controller and passed to the second part. The safety of the experiment is improved by driving the robot after checking whether the robot can be actuatable or not and whether the ZMP is located within the sole of the foot or not for a specific gait. The state of the robot can be easily grasped by showing the shaded rendering picture which displays the position of the ZMP, the driving force and the shape of robot.