• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.90-92
• /
• 2005

This paper addresses the analysis of interruption costs and the studies made through the direct interview with Korean Industrial customers for the period of two years. It is conducted to evaluate the direct and short duration interruption costs resulting from local random electrical supply interruptions. The cost is evaluated by providing a designed questionnaire focused on the experience or the preparative actions which consumers predicted they would take. In the first phase, authors made a survey on all types of industry with 176 industrial customers and evaluated them as per standard industry classification (SIC). In that case, the evaluation data obtained are not so reasonable, because the number of sampled industries was small and the sampled industries were surveyed by being divided into 18 types. So, in the second phase the authors concentrated on only 4 types of 302 industries who have many and large sensitive loads to the short duration interruption.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.119-121
• /
• 2005

전력케이블, 특히 지중 송전케이블은 사고발생시 그 파급효과가 크기 때문에 빠르고 정확한 고장점의 탐지가 필요하다. 본 논문에서는 지중 케이블의 고장 위치를 파악하기 위해 필요한 신호를 계측하고 이를 빠른 시간 내에 저장하여 사고 발생 후 이를 분석하여 고장점을 찾을 수 있도록 하는 고장점 탐지 장치를 위한 회로 설계에 대하여 언급한다. 케이블의 고장점 탐색 기술 개발을 위해서는 고장시에 발생하는 과도현상을 기록할 수 있도록 회로를 설계해야 하는 바 센서 구성과 입력 회로반의 설계, 데이터 저장 및 분석을 위한 회로의 설계는 고장점 탐색 장치 개발에 있어 필수적인 기술이다. 개발된 지중 송전선 고장점 탐색을 위한 측정회로는 사고지점 계산을 위해 필요한 신호측정에 효과적이며 실제 전력 공급 계통에 손쉽게 설치할 수 있는 장점을 가지고 있다. 이하에 지중송전선 고장점 탐색을 위한 측정 회로 설계에 관하여 언급한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.622-624
• /
• 2004

To reduce the effect of fault on power systems, like GIS and transformers, power system authorities are using various technologies to monitor and diagnose there facilities. Developing On-Line monitoring systems by using IT technology is main issue of nowadays for power system authorities. Among various monitoring and diagnosis technologies, gas sensing technologies can be most useful candidate because large power systems are using gas and oils for there insulation and analyzing density of gases that are included in the gas and oils for insulation purpose tell us what kind of reaction were arisen. In this paper, we describe on the gas sensing technology that are used for power systems monitoring and diagnosis.

• 대기
• /
• 제24권2호
• /
• pp.207-223
• /
• 2014

The bogussing method was further developed by incorporating the asymmetric component into the symmetric bogus tropical cyclone of the Structure Adjustable Balanced Vortex (SABV). The asymmetric component is separated from the disturbance field associated with the tropical cyclone by establishing local polar coordinates whose center is the location of the tropical cyclone. The relative importance of wave components in azimuthal direction was evaluated, and only two or three wave components with large amplitude are added to the symmetric components. Using the Weather Research and Forecast model (WRF), initialized with the asymmetric bogus vortex, the track and central pressure of tropical cyclones were predicted. Nine tropical cyclones, which passed over Korean peninsula during 2010~2012 were selected to assess the effect of asymmetric components. Compared to the symmetric bogus tropical cyclone, the track forecast error was reduced by about 18.9% and 17.4% for 48 hours and 72 hours forecast, while the central pressure error was not improved significantly. The results suggest that the inclusion of asymmetric component is necessary to improve the track forecast of tropical cyclones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1426-1428
• /
• 2000

A new block system - MAS (Moving Autoblock System) whose efficiency is higher than FAS(Fixed Autoblock System) in the loading capacity is required to accomodate the increasing transport volume. That MAS has higher efficiency has already been verified through various studies, especially in a line with different types of travelling trains. The efficiency of MAS for Korean high speed line with two different train model is analyzed by computer simulation. The results show that MAS is more efficient than FAS in the loading capacity.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.683-689
• /
• 2012

Photovoltaic(PV) system is one of power generation systems. Solar light in PV system is like the fuel of the car. The quantity of electricity generation, therefore, is fully dependent on the available quantity of solar light on the system of each site. If a utility can predict the solar power generation on a planned site, it may be possible to set up an appropriate PV system there. It may be also possible to objectively evaluate the performances of existing solar systems. Based on the theories of astronomy and meteorology, in this paper, Perez model is simulated to estimate the available quantity of solar lights on the prevailed photovoltaic systems. Consequently the conditions for optimal power generation of each PV system can be analyzed. And the maximum quantity of power generation of each system can be also estimated by applying assumed efficiency of PV system. Perez model is simulated in this paper, and the result is compared with the data of the same model of Meteonorm. Simulated site is Daejeon, Korea with typical meteorological year(TMY) data of 1991~2010.

• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.257-265
• /
• 2010

This study concerned about "Gemini type co-surfactant" which has very interesting properties with new components. They were synthesized by reaction of diethylene glycol monoethyl ether and dicarboxylic acid. The structure could be comfirmed with FT-IR and $^1H$-NMR. Surface active properties such as surface tension, evaluated cmc, cloud point, emulsing power were measured respectively at given conditions. Their surface tensions in the aqueous solution were decreased to 33~35 dyne/cm, which was lower than 39 dyne/cm of SDS, and their cmc values evaluated by surface tension method were $5.0{\times}10^{-1}\sim7.5{\times}10^{-1}$ mol/L. And the emulsifying power was excellent in jojoba oil. All of the synthesized Gemini surfactants possessed good water solubility and their cloud point were $48\sim58^{\circ}C$. As results, Gemini surfactants which were synthesized are expected to be applied as O/W emulsifiers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.375-377
• /
• 2004

22.9kV급 가공배전선에서의 뇌격현상은 직접측정이 어렵기 때문에 지금까지 절연협조수준의 도출은 수치적인 모의해석과정에서 얻어진 과전압강도를 근거로 하고 있다. 대표적인 모델에 대해서 만이라도 실측자료를 확보할 수 있다면 해석과정의 정확도를 높이는 중요한 전기가 될 수 있다. 이러한 가공배전선로의 뇌격현상을 측정하기 위한 상용설비를 이용한 경제적 측정시스템을 구성하였다. 접지회로에서 발생하는 과전압으로 인한 인명뿐 아니라 계측설비의 안전성도 확보하고 과 경제성확보를 위하여 전주 중간에 장시간용 UPS 및 파형측정설비를 2중 차폐함 안에 넣어 1점 접지상태가 되도록 고정하고 측정point에 HV divider 및 로고스키코일을 설치하여 한 지점에서의 측정회로를 구성하였다. 전체적으로 뇌격전류 주입 위치에서부터 3지점을 선정하여 측정설비를 설치하고 경제적인 Rs485 multi-drop 회로를 구성하여 통신망을 확보하였다. 직렬통신망에는 뇌격시험 시 발생하는 과전압에 대한 보호회로로서 간단한 수동식 개폐회로를 구성하였다. 측정파형을 전체적으로 전송받는 속도가 약간 늦기는 하나 간단한 data acquisition program을 사용하여 전체 측정회로를 가동시킬 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.189-191
• /
• 2004

This paper presents summary results of direct interview survey of Korean industrial customers conducted to evaluate the direct and short duration interruption costs resulting from local random electrical supply interruptions. The cost is evaluated using the questionnaires authors designed, which are mainly on the experience or preparatory actions consumers Predicted they would take. Economic evaluation of reliability that traditionally takes into account duration and frequency of interruption does not accurately reflect the lost value or economic impacts of industrial customer, especially large size, caused by any kind of interruption. So, to imply the substantial difference in costs incurred by different customer group, the authors apply the international standards, i.e. IEC, IEEE, to the analysis on the interruption costs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1591-1598
• /
• 2011

The objective of this paper is to study how to apply the functional models in the design reviews and the validation of the subsequent design specifications and standards in the urban rail transit standardization program. The functional models can be obtained based on the requirements. Specifically, the requirements are first represented by the use case and sequence diagrams and then the results are transformed into the functional models using the Systems Modeling Language (SysML) diagrams and the FFBD (Functional Flow Block Diagram) and others. Based on the results of the study, it can be checked whether the original requirements have been reflected properly in the designs. Also, it can be seen that how the possible changes in the requirements affect the functions and thus how the designs should be changed accordingly.