• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.273-273
• /
• 2011

현재 사용되고 있는 플로팅 게이트를 이용한 플래시 메모리 소자는 비례축소에 의해 발생하는 단 채널 효과, 펀치스루 효과 및 소자간 커플링 현상과 같은 문제로 소자의 크기를 줄이는데 한계가 있다. 이러한 문제를 해결하기 위하여 silicon nitride와 같은 절연체를 전자의 트랩층으로 사용하는 charge trap flash (CTF) 메모리 소자에 대한 연구가 활발히 진행되고 있다. CTF 메모리 소자의 전기적 특성에 대한 연구는 활발히 진행 되었지만, 수치 해석 모델을 사용하여 메모리 소자의 전하수송 메커니즘을 분석한 연구는 매우 적다. 본 연구에서는 수치 해석 모델을 적용하여 개발한 시뮬레이터를 사용하여 CTF 메모리 소자의 프로그램 동작 시 전하수송 메커니즘에 대한 연구를 하였다. 시뮬레이터에 사용된 모델은 연속방정식, 포아송 방정식과 Shockley-Read-Hall 재결합 모델을 수치해석적 방법으로 계산하였다. 또한 CTF 소자 프로그램 동작 시 트랩 층으로 주입되는 전자의 양은 Wentzel-Kramers-Brillouin 근사 법을 이용하여 계산하였다. 트랩 층에 트랩 되었던 전자의 방출 모델은 이온화 과정을 사용하였다. 게이트와 트랩 층 사이의 터널링은 Fowler-Nordheim (FN) tunneling 모델, Direct tunneling 모델, Modified FN tunneling 모델을 적용하였다. FN tunneling 만을 적용했을때 보다 세가지 모델을 적용했을 때가 더 실험치와의 오차가 적었다. 그 이유는 시뮬레이션 결과를 통해 인가된 전계에 의해 Bottom Oxide 층의 에너지 밴드 구조가 변화하여 세가지 tunneling 모델의 구역이 발생하는 것을 확인 할 수 있었다. 계산된 결과의 전류-전압 곡선을 통해 CTF 메모리 소자의 프로그램 동작 특성을 관찰하였다. 트랩 층의 전도대역과 트랩 층 내부에 분포하는 전자의 양을 시간에 따라 계산하여 트랩 밀도가 시간이 지남에 따라 일정 값에 수렴하고 많은 전하가 트랩 될 수록 전하 주입이 줄어듬을 관찰 하였다. 이와 같은 시뮬레이션 결과를 통해 CTF 메모리의 트랩층에서 전하의 이동에 대해 더 많이 이해하여 CTF 소자가 가진 문제점 해결에 도움을 줄 것이다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.98-108
• /
• 1998

Hull design data is currently prepared by a 2D CAD system and re-input to 3D CAD systems specialized for detail design or to a structural analysis system. In this paper, sharing design data among different CAD systems has been studied. Based on STEP methodology, a neutral model is generated from 2D AutoCAD drawings. To handle a geometric data of this model, the non-manifold model of ACIS is used because it can support various CAD data representation such as 2D graphic entities, 3D wireframe, 3D surface model, and solid B-Rep/CSG model. It is observed that a mon-manifold model can easily be transformed to a 3-D wireframe model for the hull detail design system AutoDef or a FE model for the structural analysis system Nastran.

• RED RIBBON
• /
• s.76
• /
• pp.7-9
• /
• 2007

1980년대 초 후천성면역결핍증의 원인 병원체가 인체면역결핍바이러스로 밝혀진 이후 그 동안 많은 치료제가 개발되어 사용되고 있으며 궁극적으로 질병의 예방을 위한 백신 개발을 위해 많은 과학자들이 연구를 진행하고 있다. 그러나 아직까지 상용화된 백신은 개발되지 않고 있는 실정이다. 그동안 30개가 넘는 후보 물질에 80여개가 넘는 임상 연구가 시행되었으나 만족할 만한 결과를 얻지 못했으며 이렇게 백신 개발에 어려움을 겪고 있는 이유는 여러 가지가 있다. 우선 백신 개발에 적합한 실험 동물 모델이 매우 제한되어 있어 사람을 대상으로 연구를 해야 하는 어려움이 있다. 또한 바이러스의 유전적 다양성으로 인하여 이들에게 모두 효과적인 백신을 만들기는 대단히 어렵다. 그럼에도 불구하고 많은 연구들이 진행되고 있으며 최근에는 과거와 달리 새로운 접근 방법들도 시도되고 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.670-672
• /
• 2000

본 논문에서는 단일광자방출 전산화단층촬영영상 (SPECT)을 이용하여 좌심실의 내.외벽의 운동을 분리하여 추적하는 방법을 제시한다. 좌심실의 운동은 크게 평행이동, 회전이동, 비강체 변형으로 나뉘어 분석된다. 운동 추적을 위해 사용된 역동적 변형 솔리드는 물체중심 변동 좌표계로써 특징점들의 모드형태벡터를 사용하고, 좌심실 역동성을 유한요소방법에 의해 시뮬레이션한다. 또한, 변형 모델에 대해 묵시적으로 표준화된 parameterization을 하지 않고, 의료영상으로부터 얻은 자료값을 직접 이용하기 위해 노드간 보간함수로써 3차원 가우시안 함수를 사용한다. 그리하여 보다 자연스러운 방식으로 연속적으로 변화하는 좌심실의 운동을 추적할 수 있다. 이러한 분리된 내.외벽 운동 분석은 운동 기능에 이상이 있는 심질환 분석을 보다 효과적으로 도울 수 있다.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.9-16
• /
• 2012

In order to describe external effects on the behavior of the adhesive tape, the semi-rigid body cylinder chain model for adhesive tape has been proposed as follows. Firstly the behavior of the tape is in detail investigated while it's being pulled off from the plate, and subsequently a relevant phenomenological model is designed. Then all the contributors affecting the force to peel out the tape from plate (hereafter, the pull out force) are clearly defined and their sensitivity analyses are made to set up the experimental reference condition, under which the angular dependence of the pull out force is measured in every $10^{\circ}$. The experimental data turn out to be in good agreement with the theoretical ones by our model within the measurement error, and the effects due to other factors are proved to be well explained from the phenomenological viewpoint. From these results, the concept of this study might be expected to be very useful for the test and evaluation of PSA types of adhesive tape.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.75-82
• /
• 2007

This paper addresses a method for shape optimization of a continuous elastic body considering stability, i.e., buckling behavior. The sensitivity formula for critical load is analytically derived and expressed in terms of shape variation, based on the continuum formulation of the stability problem. Unlike the conventional finite difference method (FDM), this method is efficient in that only a couple of analyses are required regardless of the number of design parameters. Commercial software such as ANSYS can be employed since the method requires only the result of the analysis in computation of the sensitivity. Though the buckling problem is more efficiently solved by structural elements such as a beam and shell, elastic solids have been chosen for the buckling analysis because solid elements can generally be used for any kind of structure whether it is thick or thin. Sensitivity is then computed by using the mathematical package MATLAB with the initial stress and buckling analysis of ANSYS. Several problems we chosen in order to illustrate the efficiency of the presented method. They are applied to the shape optimization problems to minimize weight under allowed critical loads and to maximize critical loads under same volume.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.837-847
• /
• 2020

A velocity profile for flapping flight is optimized to increase the power efficiency of 20g weighted flapping wing micro air vehicle in hover. The experimental optimization of flapping velocity profile is carried out with a real sized flapper, and various velocity profiles are realized by non-circular gear. Kriging with noise is adopted as a meta model of the profile optimization to reflect the data noise by uncertainty. The optimization results confirm that the flapping efficiency (thrust-to-power ratio) is substantially improved (11.3%) through the elastic deformation that carries the angular kinetic energy from previous stroke.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.493-500
• /
• 2012

The previous geoid model developed in early 2000s shows 14cm level of precision due to the problems on distribution, and quality of the land gravity and GPS/Leveling data. From 2007, the new land and airborne gravity data as well as GPS/Leveling data having high quality and regular distribution has been obtained. In 2011, a new gravimetric geoid model has been constructed with precision of 5.29cm which was improved about 27% comparing to the previous model. However, much more land gravity data has been collected at the control point, bench marks and triangulation points since 2010. Also, GPS/Leveling data having 10km spacing over whole country has been obtained through the project which is for the construction of new control points. In this study, new gravimetric geoid has been calculated based on the all available gravity data up to present. The geoid height shows the range from 18.05m to 32.70m over whole country and its precision is 5.76cm. The degree of fit and precision of hybrid geoid model are 3.60cm and 4.06cm, respectively. At the end, 3.35cm of the relative precision in 15km baseline has been calculated to confirm its practical usage. Especially, it has been founded that regional bias occurred at the Kangwon and coastal area due to problems on the leveling data. Also, some inland points show inconsistent large difference which needs to be verified by analyzing the unified control points results.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2002

Optical payloads for earth-observation satellites become bigger as the required resolution becomes finer. For example, the diameter of the primary mirror of IKONOS, which has ground sampling distances of 1m/4m in panchromatic/multi spectral bands, is about 700mm. As the size of optical payload becomes bigger, the light-weighting of the mirrors becomes more significant. This paper presents the FEM results of the following four mirror types of 300 m diameter under gravity release and temperature changes: flat back mirror, single arch mirror, double arch mirror, and honeycomb sandwich mirror. Furthermore, this paper extends the FEM results to larger mirrors up to the diameter of 1m based on a general scaling law and Valenete\`s equation.

• Journal of vocational education research
• /
• v.29 no.3
• /
• pp.309-334
• /
• 2010

Under the global economic competition, company competitiveness depends on creating high performance through effective human development. It is also a tendency to analyze organization members'competencies and outcomes, develop competency model, and apply the model to developing and managing human resource in each organization. Therefore, this study figures out the present condition of development of competency model and its application to examine the degree to which the competency model, which has been introduced to Korean companies for the use of competency diagnosis of members, is being utilized. For this purpose, survey items were created by expert council and advisory committee and survey was conducted for Korean corporations. The result shows that most of the companies, regardless of size and type, develop their own model by referring to outside models, or use models developed by consulting company lead. Therefore, it is urgent for the companies to develop model appropriate for the peculiarity of each company. Second, while the main reason to introduce competency model was to reinforce workers' competency, models developed have not widely utilized in HRM overall. There is a need to overcome a limit of utilization of models. Third, Majority responded that they, regardless of size and type, upgraded models or did not upgrade at all due to change of work environment. There is also a need to systematize follow-up care of the models. This is a primary research to examine the present condition of development of competency model and its application in company so that it can be used as springboard to study in-depth inside condition of Korean company using competency model and condition of particular positions of company members.