• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.61-70
• /
• 2011

IEEE 802.11 wireless network supports control frames like RTS/CTS(Request To Send / Clear To Send). Because they is defend to frame collection problems. It helps to solve the frame collection problem but decreases the throughput rate. Also, control frame makes False Node Problem. This problem is makes to other wireless nodes don't work and don't find channels in the same cell and near cells. We proposed a reformed new control frame for efficiency throughput rate and solution of False Node Problem. New control frame is to have added to 4 bytes of channel detection ability at the RTS frames. Channel detection ability supported to check channel at the wireless node start to transmit data frame, We expect that channel detection ability make prevent False Node Problem for increase to access number to channel. We perform comparative analysis in terms of delay(sec) and load(bits/sec) with reform RTS/CTS method which proves the efficiency of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.721-727
• /
• 2012

Since a conventional multi-cell transmit diversity scheme depends on the feedback from the user for the channel gain information, its performance gets to severely degrade when the channel varies fast due to the high mobility of the user. Also, transmit power of the base station cannot be fully used in the conventional scheme because only one transmit antenna is used for data transmission. In this paper, we propose a multi-cell transmit diversity scheme appropriate for fast fading channel. In the proposed scheme, channel-independent precoding vector is applied over all transmit antennas and different precoding vectors are applied for neighboring subcarriers so that the received signal is avoided to experience deep fading over multiple neighboring subcarriers. Simulation results show that the proposed scheme has better detector output signal-to-noise ratio (SNR) and bit error rate (BER) performances than the conventional scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1038-1044
• /
• 2011

In this paper, the multichannel intermediate frequency transceiver for broadband multimedia system is designed and the experimental results are analyzed. Basic elements of the transceiver such as frequency synthesizer, amplifier, mixer, automatic gain control amplifier are introduced. The analysis technique described here applies not only to amplifier but also to any other nonlinear components such as mixers and frequency doubler. Through the investigation of the power spectrum density of the transmitted signal, the phase noise of the local oscillator is evaluated below 70 dBc/kHz. The frequency characteristics of the modulated signal is flat within the system bandwidth. Also the effects of adjacent channel interference and supurious emission are analyzed. And the function of automatic gain control amplifier is well operated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.751-764
• /
• 2013

In cognitive radio ad-hoc networks, common control channel overload and packet collisions are occured due to indiscriminate broadcasting of control packets. So that the path reliability is reduced and control channel is easily saturated. In this paper, we propose a new routing algorithm considering the probability of appearance of primary user and channel status of neighbor nodes. When the source node needs to transmit a data packet to the destination, it performs route discovery process by exchanging control messages using a control channel in ADOV CR Ad-hoc networks. If any intermediate node doesn't have common data channel with previous node to transmit data, it doesn't rebroadcast control packet. And if it has common data channels with previous node, each node determines channel contribution factor with the number of common channels. Based on the channel contribution factor, each node performs different back-off broadcasting. In addition, each node controls control packet flooding by applying to proposed advanced mode using such as number of available channels and channel stability. With the proposed method, the number of control packets to find the data transmission path and the probability of collision among control packets can be decreased. While the path reliability can be increased. Through simulation, we show that our proposed algorithm reduces packet collisions in comparison with the traditional algorithm.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.294-300
• /
• 2010

In this paper, We analysis of effective coverage extension for Tri-sector cellular systems using Multi-hop Relay based on IEEE802.16j system. In the proposed international standard of IEEE 802.16j MMR (Mobile Multi-hop Relay) use of the omni-directional antenna, 3-sector and 6-sector antenna is considered to Base Station and Relay Station. Omni-directional antenna service can offer as all directions but a throughput decreases due to the signal interference of near Relay Stations. In the directional antenna, cause of an interference with the base station which it arranges an antenna so that a beam can have the direct and does with neighbor Base Station and Relay Station can be reduced interference, therefore the effective throughput is higher than the omni-directional antenna system. But, In case of Base Station and Relay Station use the directional antenna, the efficiency which the directional antenna has the Co-channel interference due to in the different cell by the channel reuse is decreased. In this study, we propose the structure of arranging the Base Station and Relay Station having the directional antenna in the NBTC, WBTC antenna in a multi-tier. It compared and analyzed with the mode that the multi-hop Relay Station has the omni-directional antenna, Relay Station are used the NBTC antenna and the WBTC antenna system also, We analyze a relation between the performance degradation and the cell coverage extension which it follows because the number of hop in the multi-hop Relay Station.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.94-101
• /
• 2007

Streaming video is expected to become a key service in the developing heterogeneous wireless network. However, sufficient quality of service is not offered to video applications because of bursty packet losses. An effective solution for packet loss in wireless network is to perform a proper concealment at the receiver. However, most concealment methods can not conceal effectively the consecutively damaged macro blocks, since the neighboring blocks are lost. In the previous work, bidirectional motion vector tracking (BMVT) method has been proposed which uses the moving trajectory feature of the damaged macro blocks. In this paper, a channel-adaptive redundancy coding method for the better BMVT error concealment is presented. The proposed method provides enhanced video quality at the cost of a little bit overhead in the wireless error-prone network.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1458-1467
• /
• 1999

VLSI 공정 기술이 발달하면서 이웃한 전선 간의 간격이 점점 더 가까워 지고 있으며, 그에 따라 인접 전선 간의 혼신 문제가 심각해지고 있다. 본 논문에서는 3층 그리드 채널 배선에 적용 가능한 혼신을 최소화시키는 배선층 할당 방법을 제안한다. 이 방법은 선형 의사 불린 최적화 기법에 맞도록 고안되었으며, 적절한 변수 선택 휴리스틱과 상한값 추정 방법을 통하여 최적의 결과를 짧은 시간 안에 찾아낸다. 실험 결과를 통하여, 일반적인 0/1 정수 선형 프로그래밍 기법과 비교하여 성능과 수행시간 면에서 우수함을 보인다. Abstract Current deep-submicron VLSI technology appears to cause crosstalk problem severe since it requires adjacent wires to be placed closer and closer. In this paper, we deal with a horizontal layer assignment problem for three layer HVH channel routing to minimize coupling capacitance, a main source of crosstalk. It is formulated in a 0/1 integer linear programming problem which is then solved by a linear pseudo boolean optimization technique. Experiments show that accurate upper bound estimation technique effectively reduces crosstalk in a reasonable amount of running times.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.595-598
• /
• 2014

In order to provide the Mobile Stations operating in IEEE 802.11 Wireless LAN network with seamless handover, a comprehensive study on the functions of handover considering various networking environments and characteristics of Mobile Stations is required. Note that the channel scan process finding a new AP takes the major portion of handover time, and this is the most significant issue with seamless handover for real-time multimedia service in WLAN environment. In this paper the functions required to provide seamless handover in IEEE 802.11 WLAN network are identified, and a new scanning technique is proposed with which the Mobile Stations can selectively scan the channels to reduce the channel scan time in various network environments. Here each Mobile Station awares of the channels the neighbor APs are using by scanning them in advance according to the proposed technique. Afterwards, when handover is actually required, the optimal AP is decided quickly by scanning only the predetemined group of channels and order of scan without unnecessary scan of all the channels. In addition, proposes to enter the Scan Trigger Value and Handover Threshold Value in mobile phones in order to prevent the phenomenon can not handover.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.40-47
• /
• 2006

This paper proposes a multitoning method using threshold modulation of MJBNM(Modified Jointly Blue Noise Mask) for banding artifacts reduction. As banding artifacts in multitoning appear as uniform dot distributions around the intermediate output levels, such multitone output results in discontinuity and visually unpleasing patterns in smooth transition regions. Therefore, to reduce these banding artifacts, the proposed method rearranges the dot distribution by introducing pixels in the neighborhood of output levels that occurs banding artifacts. First of all principal cause of banding artifacts are analyzed using mathematical description. Based on this analytical result, a threshold modulation technique of MJBNM which takes account of chrominance error and correlation between channels is applied. The original threshold range of MJBNM is first scaled linearly sot that the minimum and maximum of the scaled range include two pixel more than adjacent two output levels that cover an input value. In an input value is inside the vicinity of any intermediate output levels produce banding artifacts, the output is set to one of neighboring output levels based on the pointwise comparison result according to threshold modulation parameter that determines the dot density and distribution. In this case, adjacent pixels are introduced at the position where the scaled threshold values are located between two output levels and the minimum and maximum threshold values. Otherwise, a conventional multitoning method is applied. As a result, the proposed method effectively decreased the appearance of banding artifacts around the intermediate output levels. To evaluate the quality of the multitone result, HVS-WRMSE according to gray level for gray ramp image and S-CIELAB color difference for color ramp image are compared with other methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.730-742
• /
• 2014

In the case of On-demand routing protocol in cognitive radio ad-hoc networks, broadcasting of control packets may occur common control channel overload and packet collisions during the routing procedure. This situation is to increase the overhead of path finding and also limited to find the accurate and reliable path. Since reliable channel and path finding is restricted, path life time is shorten and path reliability is reduced. In this paper, we propose a new routing algorithm that reduces control channel overhead and increases path life time by considering the probability of appearance of primary user and channel status of neighbor nodes. Each node performs periodic local sensing to detect primary user signal and to derive primary user activity patterns. The probability of primary appearance on the current channel and the channel status can be obtained based on the periodic sensing. In addition, each node identifies the quality of the channel by message exchange through a common channel with neighbor nodes, then determines Link_Levels with neighbor nodes. In the proposed method, the Link Level condition reduces the number of control messages that are generated during the route discovery process. The proposed method can improve path life time by choosing a path through Path_Reliability in which stability and quality are weighted depending on the location. Through simulation, we show that our proposed algorithm reduces packet collisions and increases path life time in comparison with the traditional algorithm.