• Title/Summary/Keyword: 이용철

Search Result 9,798, Processing Time 0.042 seconds

Applied Technologies and Effects for the Carbon Zero Office Building (업무용 탄소제로건물의 적용기술 및 효과)

  • Lee, Jae-Bum;Hong, Sung-Chul;Beak, Name-Choon;Choi, Jin-Young;Hong, You-Deog;Lee, Suk-Jo;Lee, Dong-won
    • Journal of Climate Change Research
    • /
    • v.2 no.4
    • /
    • pp.283-295
    • /
    • 2011
  • Many actions against climate change have been taken to reduce greenhouse gases (GHGs) emissions at home and abroad. As of 2007, the GHGs emitted from buildings accounted for about 23 % of Korea's total GHGs emission, which is the second largest GHG reduction potential following industry. In this study, we introduced Carbon Zero Building (CZB), which was constructed by the National Institute of Environmental Research to cut down GHGs from buildings in Korea, and evaluated the main applied technologies, the amount of energy load and reduced energy, and economic values for CZB to provide data that could be a basis in the future construction of this kind of carbon-neutral buildings. A total of 66 technologies were applied for this building in order to achieve carbon zero emissions. Applied technologies include 30 energy consumption reduction technologies, 18 energy efficiency technologies, and 5 eco-friendly technologies. Out of total annual energy load ($123.8kWh/m^2$), about 40% of energy load ($49kWh/m^2$) was reduced by using passive technologies such as super insulation and use of high efficiency equipments and the other 60% ($74.8kWh/m^2$) was reduced by using active technologies such as solar voltaic, solar thermal, and geothermal energy. The construction cost of CZB was 1.4 times higher than ordinary buildings. However, if active technologies are excluded, the construction cost is similar to that of ordinary buildings. It was estimated that we could save annually about 102 million won directly from energy saving and about 2.2 million won indirectly from additional saving by the reduction in GHGs and atmospheric pollutants. In terms of carbon, we could reduce 100 ton of $CO_2$ emissions per year. In our Life Cycle Cost (LCC) analysis, the Break Even Point (BEP) for the additional construction cost was estimated to be around 20.6 years.

The influence of the decision making time by using point-of-care creatinine in patients with acute abdomen (급성 복증 환자에서 현장검사 크레아티닌을 이용한 의사결정 시간의 단축)

  • Choi, Younhyuk;Cho, Sunguk;Ahn, Hongjoon;Min, Jinhong;Jeong, Wonjoon;Ryu, Seung;Oh, Segwang;Kim, Seunghwan;You, Yeonho;Lee, Jinwoong;Park, Jungsoo;Yoo, Insool;Cho, Yongchul
    • Journal of The Korean Society of Emergency Medicine
    • /
    • v.29 no.6
    • /
    • pp.663-670
    • /
    • 2018
  • Objective: Radio-contrast abdomino-pelvic computed tomography (APCT) is considered the gold standard diagnostic tool for an acute abdomen in the emergency department. On the other hand, APCT has a risk of contrast-induced nephropathy. Emergency physicians evaluate the creatinine (Cr) level prior to taking a APCT for the above reason but it takes time to evaluation the serum Cr level. This study hypothesized that Cr measured by a point-of-care test (POCT) can shorten the time to making clinically important decisions for patients with an acute abdomen. Methods: This prospective randomized study was conducted between March 2017 and October 2017. The subjects were divided into two groups (Cr measured by laboratory vs. Cr measured by POCT). To analyze the clinical acceptability for creatinine, agreement was demonstrated graphically by Bland-Altman plots. This study compared the time to make a clinically important decision by physicians and the length of stay at the emergency department in both groups. Results: A total of 76 patients were eligible for the study, 38 patients were assigned to each group. There was no statistically significant difference in the time to the first medical examination (P=0.222) and emergency department stay time (P=0.802). On the other hand, the time to recognition of the Cr level (P<0.001), time to performing APCT (P<0.001), time to decision making (P<0.001), and time to initiation of treatment (P<0.001) were shortened significantly in the point-of-care creatinine group. Conclusion: In this study, the POCT for creatinine can allow rapid decision making by shortening the time to performing the radio-contrast APCT than the laboratory for patients with an acute abdomen.

Osteoblastogenic Activity of Tenebrio molitor Larvae Oil on the MG-63 Osteoblastic Cell (갈색거저리 유충 오일이 MG-63 조골세포 분화에 미치는 영향)

  • Seo, Minchul;Baek, Minhee;Lee, Joon Ha;Lee, Hwa Jeong;Kim, In-Woo;Kim, Sun Young;Hwang, Jae-Sam;Kim, Mi-Ae
    • Journal of Life Science
    • /
    • v.29 no.9
    • /
    • pp.1027-1033
    • /
    • 2019
  • Recently, Korea has seen a rapid increase in the elderly population. As a result, osteoporosis, a geriatric disease, has become a social problem. To investigate the novel and natural materials for promoting osteoblastogenesis, we investigated the osteoblastogenic activity of Tenebrio molitor larvae oil (TMO) on the MG-63 preosteoblast cells. The cytotoxicity and proliferation effects of TMO on MG-63 cells were measured by MTS assay. There was no cytotoxicity up to $80{\mu}g/ml$. At 40 and $80{\mu}g/ml$ of TMO (treated for 48 hr), cell proliferation was elevated about 120% compared to the control. The osteoblastogenic activity of TMO was measured with alkaline phosphatase (ALP) activity at 5 days. Doses of 5 to $80{\mu}g/ml$ of TMO increased ALP activities significantly compared with the control. In addition, expression of ALP and Runx2 (osteoblastogenic markers) were markedly increased after treatment of TMO for 5 days. These results provide evidence that TMO promotes osteoblastogenesis by increasing the gene and protein expression of ALP and Runx2, and they suggest that TMO may be a potential agent for bone formation and preventing osteoporosis.

An investigation Of IntraFraction Motion Correction For Lung Stereotactic Body Radiation Therapy By Using IntraFraction Cone Beam Computed Tomography (폐암 환자의 정위적 체부 방사선 치료 시 IntraFraction CBCT를 이용한 치료 중 자세 오차 교정에 대한 고찰)

  • Song, Hyeong Seok;Cho, Kang Chul;Park, Hyo Kuk;Yoon, Jong Won;Cho, Jung Hee
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.31 no.1
    • /
    • pp.67-74
    • /
    • 2019
  • Purpose: The purpose is to correct for position errors caused by long treatment times. By correcting the target motion that can occur during lung SBRT using IntraFraction CBCT. Methods and materials: We analyzed retrospectively the IFM data of 14 patients with two treatment arc in the treatment plan for lung cancer with stereotactic radiotherapy. An IntraFraction Motion was applied to the Arccheck phantom to acquire the Gamma index data. Results : IntraFraction Motion during the first treatment arc is in the left-right(LR), superiorinferior(SI), anterior-posterior(AP) directions were $0.16{\pm}0.05cm$, 0.72 cm(max error), $0.2{\pm}0.14cm$, 1.26 cm, $0.24{\pm}0.08cm$, 0.82 cm and rotational directions was $0.84{\pm}0.23^{\circ}$, $2.8^{\circ}$(pitch), $0.72{\pm}0.23^{\circ}$, $2.5^{\circ}$(yaw), $0.7{\pm}0.19^{\circ}$, $2^{\circ}$(roll). IntraFraction Motion during the second treatment arc is in the LR, SI, AP directions were $0.1{\pm}0.04cm$, 0.37 cm, $0.14{\pm}0.17cm$, 2 cm, $0.12{\pm}0.04cm$, 0.5 cm and rotational directions was $0.45{\pm}0.12^{\circ}$, $1.3^{\circ}$, $0.37{\pm}0.1^{\circ}$, $1^{\circ}$, $0.35{\pm}0.1^{\circ}$, $1.2^{\circ}$. Gamma index pass rates were $82.64{\pm}10.51%$, 48.4 %. Conclusions : In this study, we examined the validity of IntraFraction Motion correction in lung SBRT and the efficiency of IntraFraction CBCT. Due to the nature of SBRT treatment, IFM may increase due to the increased treatment time. It is believed that the increase in IFM with the increase in treatment time can be improved with the use of FFF Beam and additional position correction using CBCT during treatment.

A Survey on Egg Laying Performance and Distribution Status of Animal Welfare Certified Farms for Laying Hens (산란계 동물복지 인증 농가의 사육 및 유통 현황 조사)

  • Hong, Eui-Chul;Kang, Hwan-Ku;Park, Ki-Tae;Jeon, Jin-Joo;Kim, Hyun-Soo;Kim, Chan-Ho;Kim, Sang-Ho
    • Korean Journal of Poultry Science
    • /
    • v.46 no.2
    • /
    • pp.55-63
    • /
    • 2019
  • This study was conducted to evaluate animal welfare approved farms in three housing systems (open, windowless, and free-range). The survey was conducted in 25 animal welfare approved farms, and 10 farms were surveyed for distribution status. The main breed in all animal welfare approved farms of laying hens was Hy-Line Brown variety. In the case of open house, laying hens were bred in traditional and panel houses simultaneously; however, the ratio of panel house was 58.3%, which was higher than that of the traditional house. All the windowless houses were made of panels and more than 15,000 laying hens were housed in a single windowless house. In the case of free-range house, it was maintained on a small scale of less than 12,000 birds. Fifty-six percent of the surveyed farms were breeding at $7{\sim}8birds/m^2$. In terms of male and female ratios, most farms maintained 1 male:15 females, but there was a farmhouse that switched 17 or 20 females to 1 male. The daily dietary allowance was 110~170 g, and 32% of the surveyed farms provided feed of more than 150 g/day, which showed that forage feed was important. The age of at the first egg was 123 days, 122 days, and 120 days, and the peak percent was 91.8%, 94.9%, and 86.5% in open, windowless and free-range houses, respectively. The average egg production rate was 74.0%, 84.6%, and 72.7% in open, windowless, and free-range houses respectively, thus, there was no correlation between feed intake and hen-housed eggs. Distribution of welfare certified eggs was mainly a direct deal with the consumer or through contract production. The ratio of direct transactions between large-scale marts and eco-friendly specialty stores of welfare approved eggs was higher than that of conventional eggs. The rate of contract sales of eggs in both the barn and free-range systems was high, and the percentage of courier sales farms was also high. Excluding courier services, price of eggs in the barn system rose to more than 30 won/egg in the second half of 2017 (after AI). Price of eggs in the free-range system rose to more than 50 won/egg in the second half of 2017 (after AI). In the case of courier sales, the same price of 500 won was maintained before and after AI. In conclusion, the results of this study can be used as basic data for improving the animal welfare certification system for laying hens in Korea.

Characteristics of Soil Disturbance Caused by Passages of Harvester and Forwarder in Cut-to-Length Harvesting Operations (단목생산작업에 있어서 하베스터와 포워더의 임내주행에 따른 토양교란 특성)

  • Han, Sang-Kyun;Lee, Kyeong-Cheol;Oh, Jae-Heun;Mun, Ho-Seong;Lee, Sang-Tae;Choi, Yun-Sung;Choi, Byoung-Koo
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.1
    • /
    • pp.67-76
    • /
    • 2019
  • With an increasing demand of timber production, the use of heavy machinery in forest management has significantly increased, causing the changes of soil physical properties and the decline of long-term site productivity. This study was conducted to evaluate the effects of logging slash (non-slash, slash $7.3kg/m^2$, and slash $11.5kg/m^2$) and machine passes(harvester 1 pass and forwarder 1 to 10 passes) on soil physical properties at 10 cm, 20 cm and 30 cm soil depths in harvester and forwarder operations and also to estimate the degree of soil surface disturbance. The results indicated that soil bulk density in the non-slash treatment site increased 10 %~29 % (25~139 % in soil penetration resistance) at all soil depths, compared with the slash treatment site(slash $11.5kg/m^2$). Therefore, the creation of a slash mat could be an effective way to minimize the changes of soil physical properties. In addition, 92 % of total soil compaction in slash treatment site was created within harvester 1 pass and forwarder 5 passes. In non-slash treatment site, 84 % of total soil compaction was created within first harvester and forwarder passes. The results showed that slash treatment was effective to reduce soil compaction caused by machine passes and also it is necessary to create designed forwarding trails for minimizing soil compaction area at timber harvesting sites.

Characteristics of micronized blue ceramic pigments using electric arc furnace dust (제강분진을 활용한 청색 세라믹 안료의 미립화 거동에 관한 연구)

  • Kim, Hye-Jin;Han, Kyu-Sung;Hwang, Kwang-Taek;Nahm, Sahn;Kim, Jin-Ho
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.29 no.3
    • /
    • pp.115-122
    • /
    • 2019
  • Electric arc furnace dust (EAFD), which is a dust waste generated in the steel manufacturing process, contains heavy metals. Recently, researches of recycling a large amount of valuable metals such as zinc and iron in EAFD are being actively carried out. In this study, EAFD is used as a substitute for cobalt in blue ceramic pigments without any pretreatment. Then, the synthesized blue ceramic pigment using EAFD was micronized and formulated as a ceramic ink for inkjet printer. The particle size distribution, crystal structure and color characteristics during the micronization process were investigated for the development of ceramic ink. $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed excellent blue coloric properties and monomodal distribution through micronization process. The average particle size of $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments after 3 hours of milling was $0.271{\mu}m$, which is smaller than $0.303{\mu}m$, which is the average particle size of $CoAl_2O_4$ ceramic pigments without EAFD after 5 hours of milling. Especially, it was confirmed that $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed a color difference (${\Delta}E{^*}_{ab}$) value of 5.67, which smaller than ${\Delta}E{^*}_{ab}$ value of $CoAl_2O_4$ during micronization. These results show that EAFD can be used as a raw material for a blue ceramic pigment by replacing expensive cobalt without any pretreatment.

On the Persistence of Warm Eddies in the East Sea (동해 난수성 에디의 장기간 지속에 관하여)

  • JIN, HYUNKEUN;PARK, YOUNG-GYU;PAK, GYUNDO;KIM, YOUNG HO
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.24 no.2
    • /
    • pp.318-331
    • /
    • 2019
  • In this study, comparative analysis is performed on the long-term persisted warm eddies that were generated in 2003 (WE03) and in 2014 (WE14) over the East Sea using the HYCOM reanalysis data. The overshooting of the East Korea Warm Current (EKWC) was appeared during the formation period of those warm eddies. The warm eddies were produced in the shallow Korea Plateau region through the interaction of the EKWC and the sub-polar front. In the interior of the both warm eddies, a homogeneous water mass of about $13^{\circ}C$ and 34.1 psu were generated over the upper 150 m depth by the winter mixing. In 2004, the next year of the generation of the WE03, the amount of the inflow through the western channel of the Korea Strait was larger, while the inflow was lesser than its climatology during 2015 corresponding to the development period of the WE14. The above results suggest that the heat and salt are supplied in the warm eddies through the Tsushima Warm Current (TWC), however the amount of the inflow through the Korea Strait has negligible impact on the long-term persistency of the warm eddies. Both of the warm eddies were maintained more than 18 months near Ulleung island, while they have no common feature on the pathways. In the vicinity of the Ulleung basin, large and small eddies are continuously created due to the meandering of the EKWC. The long-term persisted warm eddies in the Ulleung Island seem to be the results of the interaction between the pre-existed eddies located south of the sub-polar front and fresh eddies induced by the meanderings of the EKWC. The conclusion is also in line with the fact that the long-term persisted warm eddies were not always created when the overshooting of the EKWC was appeared.

Analysis of Index Component Content and Antioxidant Activity According to the Root Diameter of Angelica gigas Nakai (참당귀 뿌리 직경별 지표성분 함량 및 항산화 활성 분석)

  • Lee, Sang-Hoon;Lee, So-Hee;Jin, Meilan;Hong, Chung-Oui;Hur, Mok;Han, Jong-Won;Lee, Woo-Moon;Yun, Hyeong Muk;Kim, Yeon Bok;Lee, Yi;Koo, Sung Cheol
    • Korean Journal of Plant Resources
    • /
    • v.32 no.2
    • /
    • pp.116-123
    • /
    • 2019
  • Angelica gigas Nakai (AGN) is a traditional medicinal herb especially in Korea. It contains pyranocoumarins, which are major active components including decursin (D) and decursinol angelate (DA). This study was carried out to determine the change in active component content and antioxidant activity depending on the root diameter of AGN. Several processing steps are involved to use AGN roots as medicine. The dried AGN roots are divided into body (B), thick root (TkR), medium root (MR) and thin root (TnR) according to their diameter before cutting into medicine. The recovery rates of each root parts per 100 kg were measured as $32.3{\pm}2.5$, $9.0{\pm}1.0$, $39.3{\pm}2.1$ and $15.0{\pm}1.0%$, respectively and the mean diameters were measured as $51.95{\pm}4.55$, $7.05{\pm}0.89$, $2.88{\pm}0.49$ and $1.57{\pm}0.32mm$. Two index components, D and DA, were analyzed. The change of both D and DA content showed a similar tendency. Both D and DA content were increased as the root diameter decreased (higher in TnR). In addition, antioxidant activity was higher in B and TnR, and lower in TkR and MR than control. This study showed that the thinner the root diameter, the higher the D and DA content in AGN roots and that TnR has excellent antioxidant activity compared to other root parts, suggesting that the thinner root part of AGN could be used as a potential material.

Construction of Database System on Amylose and Protein Contents Distribution in Rice Germplasm Based on NIRS Data (벼 유전자원의 아밀로스 및 단백질 성분 함량 분포에 관한 자원정보 구축)

  • Oh, Sejong;Choi, Yu Mi;Lee, Myung Chul;Lee, Sukyeung;Yoon, Hyemyeong;Rauf, Muhammad;Chae, Byungsoo
    • Korean Journal of Plant Resources
    • /
    • v.32 no.2
    • /
    • pp.124-143
    • /
    • 2019
  • This study was carried out to build a database system for amylose and protein contents of rice germplasm based on NIRS (Near-Infrared Reflectance Spectroscopy) analysis data. The average waxy type amylose contents was 8.7% in landrace, variety and weed type, whereas 10.3% in breeding line. In common rice, the average amylose contents was 22.3% for landrace, 22.7% for variety, 23.6% for weed type and 24.2% for breeding line. Waxy type resources comprised of 5% of the total germplasm collections, whereas low, intermediate and high amylose content resources share 5.5%, 20.5% and 69.0% of total germplasm collections, respectively. The average percent of protein contents was 8.2 for landrace, 8.0 for variety, and 7.9 for weed type and breeding line. The average Variability Index Value was 0.62 in waxy rice, 0.80 in common rice, and 0.51 in protein contents. The accession ratio in arbitrary ranges of landrace was 0.45 in amylose contents ranging from 6.4 to 8.7%, and 0.26 in protein ranging from 7.3 to 8.2%. In the variety, it was 0.32 in amylose ranging from 20.1 to 22.7%, and 0.51 in protein ranging from 6.1 to 8.3%. And also, weed type was 0.67 in amylose ranging from 6.6 to 9.7%, and 0.33 in protein ranging from 7.0 to 7.9%, whereas, in breeding line it was 0.47 in amylose ranging from 10.0 to 12.0%, and 0.26 in protein ranging from 7.0 to 7.9%. These results could be helpful to build database programming system for germplasm management.