• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.357-364
• /
• 2007

This research is to set a direction on the recycle of Discarded Automotive tires reforming them into heavy metal adsorbents by developing a particular functional group inducing formation of Chelate complexes with heavy metal ion in the water, on the surface of the used tire conventionally turned into powdered form. For this purpose, through FT-IR, XRD, XRF, SEM, elution test we confirmed and analyzed the property of newly reformed scrapped tires, and functional group. Also, by Kinetics Study we produced an invariable value applying to absorption models. Conclusively the absorption preference of heavy metal is determined to be $Pb^{2+}>Cu^{2+}>Cd^{2+}$, and it reached absorption balance within first 30 minutes, also the absorption reaction time increased from 0.27 to $1.78\sim3.15(g/mg{\cdot}min)$, and showed more than 80% of removal efficiency. This result proved that the efficiency increased by 10 times compared with the conventional powdered Discarded Automotive tires, and the Discarded Automotive tire which implemented the Functional group can exhibit a great efficiency as heavy metal adsorbent.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1169-1178
• /
• 1998

This study was performed to purify fig pectinesterase(F-PE) and characterize its in situ activity. Three kinds of F-PE were partially separated by using ammonium sulfate fractionation, Q-Sepharose column, CM-cation exchanger column chromatography, and HPLC. One of those was anionic protein and the others were cationic proteins. All of them had approximate molecular weight of 27,000 and lost rapidly their activity during storage. Therefore alternative crude enzyme was prepared by suspending the freeze dried and milled fig powder in 0.1 M NaCl at pH 7.5. F-PE had the optimum pH of 8.5, the optimum temperature of $50^{\circ}C$ with activation energy of 7,671 cal $mol^{-1}K^{-1}$ and stability up to $55^{\circ}C$ with 10 minutes heating. Optimum activity was obtained in $0.2{\sim}0.4$ M NaCl with optimum solubility at above 0.8 M NaCl.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.201-205
• /
• 1999

Hydroxypropylmethylcelluloses (HPMC) are cellulose ethers which may be used as the basis for hydrophilic matrices for controlled release oral delivery and offer the advantages of being non-toxic and relatively inexpensive. In this work, we designed new drug release system using HPMC as matrix, manufactured by direct compression technology and have investigated the effects of the controlling factors on drug release from a swellable hydrophillic delivery system. It was found that the release rate of the drug decreased with increasing the polymer molecular weight and the polymer content in tablets, and was independent of compaction pressure and pH of dissolution fluids. Especially, the ability of the anionic surfactant, sodium laurylsulfate, to retard the release of pseudoephedrine hydrochloride from HPMC was characterised. With increasing the concentration of the sodium laurylsulfate within the matrix, drug release rate decreased. It is believed that, provided the pseudoephedrine hydrochloride and the sodium laurylsulfate are oppositely charged, they will bind together in situ within the HPMC matrix, leading to reduced drug release rates.

• Journal of the Korean Home Economics Association
• /
• v.39 no.1
• /
• pp.91-102
• /
• 2001

The non-starch polysaccharides in the cell wall of rice, glutinous rice, and black rice, were analyzed. They were fractionated into fractions; water-soluble, hot writer-soluble, ammonium oxalate-soluble, sodium hydroxide-soluble, potassium hydroxide-soluble, and the alkali-insoluble, according to the solvent solubility. The dietary fiber contents were 5.4% in glutinous rice, 4.2% in rice and 7.5% in black rice. The sodium hydroxide soluble fibers were abundant in each kind of rice, especially 4.01% in black rice. The water soluble fibers were 80% of dietary fiber in glutinous rice, 66% in rice, 86% in black rice. It was supposed that the content of the water soluble fibers in rice was increased by pounding. Pectic substances in water soluble fibers, hot water soluble fibers, and ammonium oxalate soluble fibers fraction, were 2.4% in glutinous rice fraction,1.59% in rice, and 1.12% in black rice. Alkali soluble fibers were considered as hemicellulose. Black rice contained 5.80% of hemicellulose, which was more than twice as much as glutinous rice(2.58%) and rice(2.22%). Alkali insoluble fibers were considered as cellulose, which showed no considerable difference. Among samples content of uronic acid in glutinous rice, rice and black rice were 0.9%, 0.66%, 1.8% respectively. Uronic acid of black rice was twice more than other samples tested. The fraction of black rice that uronic acid was extracted at most was the fraction of sodium hydroxide. Mono saccharides of the fraction was the glucose, the arabinose, the xylose.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.90-95
• /
• 2003

This study was carried out to identify of C3G (cyanidin-3-glucoside) from mulberry fruits and quantify with different varieties. C3G of mulberry fruits was extracted with 1％ HCl-MeOH and purified with open column (5${\times}$90cm) which filled with Amberlite IRC-50 ion exchange resin. The $\lambda$max ranges of the purified C3G on UV/vis spectrum were 516nm and 280nm. Also, molecular weight of C3G from mulberry fruits by LC-Mass was determined as 449. From above results, we concluded that anthocyanin pigment of mulberry fruits was C3G only. The cyanidin-3-glucoside (C3G) was separated and quantified by High Performance Liquid Chromatography (HPLC) system using a Nova-Pack C$\_$18/ column. Mean content of the 35 tested accessions was 0.89％. Also fruity characteristics as well as C3G content to select the desirable mulberry varieties for the production of fruit were researched and analyzed. We selected three suitable varieties such as 'Susungppong', 'Kangsun', and 'Jeolgokchosaeng(Chungpuk)'.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.411-419
• /
• 1996

The experiment was aimed to determine a change of chemical component in irrigatted water based on different tillage methods and nitrogen rates under mulching of barley straw in direct seeded rice. There was no difference in water pH of no-tillaged plot but high in tillaged plot until 10 days after treatment. The electric conductivity(EC) of the water was higher in no-tillaged plot than in tillaged plot. However, the dissolved oxygen content was vice versa. The content of NH$_4$-N was high in higher application rate of N fertilizer without the tillage. Mean while, NO$_3$-N content was highly affected by no-till aged plot particularly in between application time and fertilizer rate but not in tillaged plot. There was higher in P043- content with the no-tillaged plot compared to the tillaged plot. It was big difference with higher application rate of the fertilizer. Soil cations were high in much application of fertilizer without the tillage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.177-182
• /
• 1998

To evaluate the effect of chicken manure compost(CMC) application on nutrient utilization and reduction of N fertilizer application for vegetables such of cabbage, reddish, and eggplant, four different application rates of CMC such as 0, 10, 30. $50Mg\;ha^{-1}$ were amended with three different rates of chemical fertilizer of 0, 15, $300kg\;ha^{-1}$. The efficiency of nutrient utilization on CMC were in the order of N, P, K. For each respective nutrient utilization by cabbage, reddish, and eggplant, N were 29%, 20%, 14%; P were 10%,<1%, and <1% ; K were 5%, 22%, 32%. The greater application of CMC, the less the efficiency, while the efficiency of P was increased with increasing application of CMC. The highest efficiency of nutrient utilization was found in $10Mg\;ha^{-1}$. The amounts of reduction of N fertilizer application in soils amended with $10Mg\;ha^{-1}$ of CMC with respect to maintain the normal production of each vegetables observed in this experiment were as follows: $25kg\;ha^{-1}$ and $15kg\;ha^{-1}$ less, and $13kg\;ha^{-1}$ more than the recommended rate for cabbage, eggplant, and reddish, respectively. For elution of available of N by the application of CMC, there was a gradual increase up to 30 day, then gradually decreased. However, there was increase of N eluted in the application of $50Mg\;ha^{-1}$. For soil chemical properties, pH, T-N, OM, and $P_2O_5$ were increased with increased application of CMC, as well as did cations such as K, Ca, and Mg. Yield and glucose of cabbage was significantly increased at the application of $30Mg\;ha^{-1}$ CMC, but content of nitrate in eggplant and raddish was highly increased with increasing application of N fertilizer and CMC. By the way, the yields of cabbage, reddish, and eggplant were slightly decreased with CMC application greater than $50Mg\;ha^{-1}$.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.13-23
• /
• 2002

The chemical compositions of groundwaters from the granite areas mainly belong to Ca-HC0$_{3}$ and Na-HC0$_{3}$type, and some of these belong to Ca-(CI+S0$_{4}$) and Na-(CI+S0$_{4}$) type. Spring waters and groundwaters from anorthosite areas belong to Ca-HC03 and Na-HC03 type, respectively. The result of reaction path modeling shows that the chemical compositions of aqueous solution reacted with granite evolve from initial Ca-CI type, via CaHC0$_{3}$ type, to Na-HC0$_{3}$ type. The result of rain water-anorthosite interaction is similar to evolution path of granite reaction and both of these results agree well with the field data. In the reaction path modeling of rain watergranite/anorthosite reaction, as a reaction is progressing, the activity of hydrogen ion decreases (pH increases). The concentrations of cations are controlled by the dissolution of rock-forming minerals and precipitation and re-dissolution of secondary minerals according to the pH. The continuous addition of granite causes the formation of secondary minerals in the following sequence; gibbsite plus hematite, Mn-oxide, kaolinite, silica, chlorite, muscovite (a proxy for illite here), calcite, laumontite, prehnite, and finally analcime. In the anorthosite reaction, the order of precipitation of secondary minerals is the same as with granite reaction except that there is no silica precipitation and paragonite precipitates instead of analcime. The silica and kaolinite are predominant minerals in the granite and anorthosite reactions, respectively. Total quantities of secondary minerals in the anorthosite reaction are more abundant than those in the granite reaction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2018

In this study, optimum extraction conditions for phosphorus recovery from sewage sludge ash(SSA) were investigated. For this purpose, an experiment was conducted to determine optimal recovery conditions for Ca-P type phosphorus by using calcium component in the recycled aggregate residue. The phosphorus content of sewage sludge ash was confirmed to be 5.0 %. When $H_2SO_4$ was used as an extract, concentration of 1 N $H_2SO_4$, L/S ratio of 10, and extraction time of 30 min were found to be the optimal extraction conditions. Phosphorus was extracted by using optimal extraction conditions, and then the heavy metals eluted with phosphorus were removed using 1~20 g of cation exchange resin. In 20 g of cation exchange resin, Fe 71.3%, Cu 82.4%, Zn 79.9%, and Cr 15% were removed. After that, the mixing ratio of the calcium extract obtained from the recycled aggregate residue (RAR) was changed to 1:1, 1:5, 1:10. The pH of the SSA to RAR mixture was adjusted to 2, 4, 8 and 12 by the addition of 5 N NaOH to the mixture of 1:5, and the phosphorus was recovered as Ca-P type precipitate. The optimum pH was 8. When recycled aggregate residues were used, the weight of calcium phosphate increased, but the amount of wastewater generated also increased. Therefore, it was concluded that the use of recycled aggregate residue was not economically feasible.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.133-139
• /
• 2006

In 'solid-phase' PEGylation, the conjugation reaction occurs as the proteins are attached to a solid matrix, and thus it can have distinct advantages over the conventional, solution-phase process. We report a case study: rhIFN-${\alpha}$-2a was first adsorbed to cation exchange resin and then N-terminally PEGylated by aldehyde mPEG of 5, 10, and 20 kD through reductive alkylation. After the PEGylation, salt gradient elution efficiently recovered the mono-PEGylate in a purified form from the unwanted species such as unmodified IFN, unreacted PEG, and others. The mono-PEGylation and its purification were integrated in a single chromatographic step. Depending on the molecular weight of the mPEG aldehyde used, the mono-PEGylation yield ranged 50-64%. We could overcome the major problems of random, or uncontrollable, multi-PEGylation and the post-PEGylation purification difficulties associated with the solution-phase process. N-terminal sequencing and MALDI-TOF MS confirmed that a PEG molecule was conjugated only to the N-terminus. Compared with the unmodified IFN, the mono-PEGylate showed the reduced anti-viral activity as measured by the cell proliferation assay. The bioactivity was reduced more as the higher molecular weight PEG was conjugated. Immunoreactivity, evaluated indirectly by antibody binding activity using a surface plasmon resonance biosensor, also decreased. Nevertheless, trypsin resistance as well as thermal stability was considerably improved.