• Journal of the Korean Magnetics Society
• /
• v.25 no.5
• /
• pp.149-155
• /
• 2015

The ECR (Electron Cyclotron Resonance) Ar ion milling was manufactured to fabricate the device of thin film. The ECR ion milling system applied to the device etching operated by a power of 600W, a frequency of 2.45 GHz, and a wavelength of 12.24 cm and transferred by a designed waveguide. In order to match one resonant frequency, a magnetic field of 908 G was applied to a cavity inside of ECR. The Ar gas intruded into a cavity and created the discharged ion beam. The surface of target material was etched by the ion beam having an acceleration voltage of 1000 V. The formed devices with a width of $1{\mu}m{\sim}9{\mu}m$ on the GMR-SV (Giant magnetoresistance-spin valve) multilayer after three major processes such as photo lithography, ion milling, and electrode fabrication were observed by the optical microscope.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.419-426
• /
• 2020

Understanding the pore structure including pore shape and connectivity in unconventional reservoirs is essential to increase the recovery rate of unconventional energy resources such as shale gas and oil. In this study, we found analysis condition to probe the nanoscale pore structure in shale reservoirs using Focused Ion Beam (FIB) and Ion Milling System (IMS). A-068 core samples from Liard Basin are used to probe the pore structure in shale reservoirs. The pore structure is analyzed with different pretreatment methods and analysis condition because each sample has different characteristics. The results show that surface milling by FIB is effective to obtain pore images of several micrometers local area while milling a large-area by IMS is efficient to observe various pore structure in a short time. Especially, it was confirmed that the pore structure of rocks with high content of carbonate minerals and high strength can be observed with milling by IMS. In this study, the analysis condition and process for observing the pore structure in the shale reservoirs is established. Further studies are needed to perform for probing the effect of pore size and shape on the enhancement of shale gas recovery.

• 한국전자현미경학회:학술대회논문집
• /
• 1997.11a
• /
• pp.19-22
• /
• 1997

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.773-774
• /
• 2013

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.129-133
• /
• 2007

Focused Ion Beam(FIB) systems is a useful tool for the fabrication of micro-nano scale structures. In this study, the effects of FIB etching on the Au microstructure are systematically investigated. As the fabrication parameters, ion dose, dwell time and beam overlap ratio are studied. First, the increases of Ga ion dose makes the milling yield higher and the sidewall of milling profile steeper. Dwell time is found to have little effects on the milling profile due to the relatively large milling area of $1\times1{\mu}m^2$ used in this study. However, beam overlap significantly affects not only milling rate but also milling profile. As the beam overlap ratio changes from positive to negative, the development of regular cross-stripe patterns at the bottom with low milling rate is observed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.61-61
• /
• 2001

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.04a
• /
• pp.24-25
• /
• 2001

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.779-780
• /
• 2011

• Journal of the Korean Vacuum Society
• /
• v.2 no.3
• /
• pp.304-313
• /
• 1993

집속 이온빔 기술은 고해상도의 이온빔 리토그라피, 마스크가 필요없는 이온주입, 그리고 Ion beam induced deposition 등 반도체 소자의 미세가공에 널리 이용되어 왔다. 좋은 안정도와 높은 전류밀도, 적은 에너지 퍼짐 그리고 낮은 에미턴스와 높은 선명도를 갖는 집속 이온빔 장비를 위한 액체 갈륨 이온원이 한국에서 개발 시업되었다. 이온빔의 전압이 15kV, 렌즈전압이 7kV 그리고 렌즈상단에 위치한 aperture의 직경이 0.2mm일 때, 0.1$mu extrm{m}$의 빔 직경으로 집속되는 정전 einzel렌즈가 설계 조립되었고, FIB 진공 chamber는 렌즈부와의 차 등 진공시스템으로 구성되어 설계제작되었다. FIB 장비가 조만간 한국에서 이온빔 밀링, ion beam induced deposition 그리고 잘못된 부분의 수정 등 반도체 제작공정에서의 응용에 큰 기여를 할 것이라 기대된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.493-496
• /
• 2011

In this paper, ion beam technology was investigated mainly through the published papers. There are two different types of method application. One method is to remove the material from the substrate, the other one is deposited to the surface of the substrate or specimen. Based on the literature review there are 3-4 times more published research papers related to the deposition than those of the removal.