• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.339-350
• /
• 2020

This study attempted to apply a hybrid technology that integrated mineral-based fillers and water-repellent agents to control the efflorescence that results from the use of inorganic binders, for the conservation treatment (surface finishing) of cultural heritage materials made up of stone. Herein, different types of mixing ratios of a filler (silica fume 3.4%) and a water repellent (silane-siloxane 1%) were selected for fabricating the inorganic binder, and it was determined that the ratio selected by weight is effective in controlling efflorescence substances. In addition, it was identified that the inorganic binder with the mixing ratio resulted in a higher compressive strength than the standard (20MPa), and the water permeability resistance was high with low water absorption. The result of ion elution from the bilder showed that a smaller number of ions was observed to affect the efflorescence (directly and indirectly) as compared to that of the control group, which was considered to be relatively stable.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.660-666
• /
• 1994

The effects of temperature and flow rate of eluent on the separation of adjacent lighter lanthanide pairs (La : Ce, Ce : Pr, Pr: Nd) have been studied with displacement chromatography. Two serial columns packed with Amberlite 120 cation exchange resin are used for loading and separation. The retaining ion is $H^+$ ion and the eluent is 0.012M and 0.015M of EDTA solution. The columns and the eluent are maintained at the temperature of 90$^{\circ}C$ and pressurized to reduce vaporizing in the ion-exchange resin column. The eluated solution is analyzed directly with ICP-AES. The separation factors of the lanthanide pairs, La: Ce, Ce :Pr, and Pr: Nd, are 4.6, 2.8, and 1.9, respectively and are higher than that from theoretical calculation at 25$^{\circ}C$. When the flow rate is reduced from 2.5 ml/min to 1.5 ml/min, the HETP is reduced from 1.60 cm to 0.88 cm. The separation efficency can be improved at lower flow rate of eluent and higher operating temperature. The recoveries of pure lanthanides than 99.9% are 49∼77% from this separation.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.276-281
• /
• 2011

The optimum condition for the extraction and purification processes of phytic acid from defatted rice bran was examined. The phytic acid was efficiently extracted when the defatted rice bran was treated with 10 volumes of 0.5% HCl for 1 hr. For the neutralization of acid-treated extract, 0.5% NaOH was the most acceptable. To purify phytic acid, Diaion HP20 resin was used to remove impurities from the extract. The flow-through was then loaded onto ion exchange columns packed with various resins and among them, Amberlite IRA-416 resin showed highest recovery yield. When the phytic acid was absorbed onto Amberlite IRA-416 resin and then eluted with 0.5% NaOH, 89% of applied phytic acid was eluted. Most proteins were removed from the purified phytic acid and total protein content of the phytic acid was 0.14%(w/w).

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.289-302
• /
• 2023

The study area was Gangnim-myeon, Hoengseong-gun, Gangwon-do, composed of the Chiaksan gneiss complex, and it was revealed that the concentrations of uranium (U) and thorium (Th) within the groundwater of the study area exceeded their water quality standards. Hence, artificial weathering experiments were conducted to elucidate mineralogically the mechanisms of their leaching using drilling cores obtained from the corresponding groundwater aquifers. First of all, the mineralogical compositions of core samples were observed, and the results indicated that the content of clinochlore, a member of the chlorite group of minerals that can form through low- and intermediate-temperature metamorphisms, was relatively higher. In addition, the Th concentration was measured ten times higher than that of U. The results of artificial weathering experiments suggested that the Th concentrations gradually increased through the dissolution of radioactive-element-bearing minerals up to the first day, and then they tended to decrease. It could be attributed to the fact that Th was leached with the dissolution of thorite, which might be a secondary mineral, and then dissolved Th was re-precipitated as the various forms of salt, such as sulfate. Even though the U content was lower than that of Th in the core samples, the U concentration was one hundred times higher than that of Th after the weathering experiments. It is likely caused by the gradual dissolution and desorption of U included in intensively weathered thorite or adsorbed as a form of UO₂²⁺ on the mineral surface. In addition, the leaching tendency of U and Th was positively correlated with the bicarbonate concentration. However, the concentrations between U and Th in groundwater exhibited a relatively lower correlation, which might result from the fact that they occurred from different sources, as aforementioned. Among various kinetic models, the parabolic diffusion and pseudo-second-order kinetic models were confirmed to best fit the dissolution kinetics of both elements. The period that would be taken for the U concentration to exceed its drinking-water standard was inferred using the regressed parameters of the best-fitted models, and the duration of 29.4 years was predicted in the neutral-pH aquifers with relatively higher concentrations of HCO₃, indicating that U could be relatively quickly leached out into groundwater.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.346-352
• /
• 1973

The quantitative separations of a mixture containing equal amounts of each cation such as Mn(Ⅱ), Cr(Ⅲ), V(Ⅴ), Cu(Ⅱ), Ni(Ⅱ), Co(Ⅱ), and Fe(Ⅲ) are carried out by the elution through $35cm{\times}3.14cm^2$ column of cation exchange resin, $Dowex 50w{\times}12$. The eluents are a mixture of 0.6 M sodium chloride and 0.1 M sodium tartrate (pH = 2.00 and 4.50) for Fe(Ⅲ), V(Ⅴ), Cu(Ⅱ), Ni(Ⅱ) and Co(Ⅱ), and a mixture of 3 M sodium chloride and 0.1 M sodium tartrate (pH = 4.50) or a mixture of 0.7 M sodium chloride and 0.5 M sodium oxalate (pH = 4.50 and 5.00) for Mn(Ⅱ) and Cr(Ⅲ). The subsidiary cations in a standard iron mixture such as V(Ⅴ), Cu(Ⅱ), Ni(Ⅱ), Mn(Ⅱ) and Cr(Ⅲ) are separated together from the large amount of Fe(Ⅲ) through $15cm{\times}3.14cm^2$ column of the resin, $Dowex 1{\times}8$, by elution with the eluent of 4.0 M hydrochloric acid. A small amount of Fe(Ⅲ), however, is eluted together with Cu(Ⅱ). V(Ⅴ), Ni(Ⅱ), Mn(Ⅱ) and Cr(Ⅲ) eluted together are separated quantitatively through $10cm{\times}3.14cm^2$ column of the resin,$Dowex 50w{\times}12$. Cu (Ⅱ) and a small amount of Fe(Ⅲ) are separated quantitatively through $10cm{\times}3.14cm^2$ column of the resin, $Dowex 50w{\times}12$, by the elution with a mixture of 0.6 M sodium chloride and 0.1 M sodium tartrate (pH = 2.00 and 4.50) as an eluent. By the conditions obtained in the separations of the standard iron mixture, Fe(Ⅲ) and all of the subsidiary cations in steel are quantitatively separated.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.287-293
• /
• 2009

This study investigated the influence of ionic strength on the adhesion and release of bacteria (Escherichia coli, Bacillus subtilis, and Staphylococcus aureus) in quartz and iron-coated sands using column experiments. Results show that the mass recovery remained constant (E. coli = 13.7${\pm}$0.5%, B. subtilis = 9.8${\pm}$1.3%, S. aureus = 13.0${\pm}$2.1%) in iron-coated sand while it decreased from 80.7 to 45.3% (S. aureus) in quartz sand with increasing ionic concentrations from 1 to 100 mM. As the ionic concentrations of leaching solution was lowered from 100 to 0.1 mM, average 39.1% of bacterial detachment was quantified from quartz sand, but no bacterial release was observed in iron-coated sand. The phenomenon observed in iron-coated sand can be attributed to the inner-sphere complexes between bacteria and coated sand, which have minimal effect from ionic strength. This study improves our knowledge regarding the bacterial interaction with surface-modified porous media.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.343-351
• /
• 2012

Excavated archaeological iron objects are prevented from being corroded going through desalination which slow down being corroded. However archaeological iron objects are liable to be corroded due to the high ionization tendency even though they are stored in environment restricted from corrosion factors. Iron objects could be deteriorated more than just excavated. Therefore this study investigated about the characteristic of re-corrosion and the effect on objects. In study, archaeological iron nails in storage for 4 years after conservation treatments were tested. Optical microscopy and X-ray photography for appearance, XRD, SEM-EDS, Raman spectroscopy for chemical composition, IC for chloride ions concentration inside iron nails were used. As results, iron nails carried out conservation treatments measured a high concentration of chloride ions after the long storage period. The form of objects were not in good condition such as broken or destroyed when the high chloride ions concentration was detected. In addition, the yellow and red powdery corrosion product were detected on the boundary between corrosion products and substrates and they were identified as akaganeite which is symptom of active corrosion.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.285-297
• /
• 2002

This study was carried out to prove the factor properties of the soil affected by a forest fire through the physical and chemical analysis and the data from the conclusion of those analysis are applied to the development of technics that reduces a forest fire-induced 2nd damage. The forest fire was in December 2000 at Gangreung city and Donghae city, Gangwon provinces, Korea. Soil samples were collected at upper layers (0-5 cm) and bottom layers (5-40 cm) in November 2001 from the burned and control sites. Values of pH in burned soils of the upper layers affected by forest fire are higher than those in control soils. Both the fragments of fire-burned plant and differences of geological properties are resulted in a class of soil. Contents of organic matters in burned soils are higher than those in control soils, exceptionally the contents of organic matters in burned soils that contain coaly shale are lower than those in control soils. Weathering indices in burned soils are higher than those in control soils and it concerned with loss of soil. Iron ions Fe(Fe$^{2+}$ or Fe$^{3+}$) are easily extracted from the burned soils by rainfall, but Mn ions are straightly exist in the burned soils by physiochemical adsorption of colloid. Through the sequential extraction in the burned soils and control soils, we are certificate the extraction of Fe ions and the disturbance of Mn ions from the burned soils. As a consequence of factor analysis in burned soil and control soil, we are certificate that the influence of forest fire results in a disturbance of positive correlation factors.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.734-741
• /
• 1998

Electrode characteristics were studied in the interface between sample solutions and $K^+$ ion selective PVC membrane electrodes containing neutral carriers, dibenzo-18-crown-6(D18Cr6) and valinomycin(Val). The effect of doping of base electrolytes, the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, and concentration variation of sample solution on the response characteristics of electrode such as the measured Nernstian slope, the detection limit, the linear response range, and potentiometric selectivity coefficients, were studied. In order to synthesize the membrane D18Cr6 and Val as neutral carriers were used, and complex between the carrier and $K^+$ ions were used as active materials. PVC membrane electrodes were made of plasticizers (DBP, DOS, and DBS), the base electrolyte[potassium tetraphenylborate(KTPB)], and solvent(THF). The chemical structure of carrier D18Cr6 was best for electrode and ideal electrode characteristics were appeared especially in case of doping of TPB. The optimum carrier content was about 3.23 wt % in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the electrode characteristics was improved. But its characteristics were lowered below the optimum membrane thickness because of the elution of carrier, deterioration of membrane strength, etc. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were in the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.511-515
• /
• 2000

The effect of Ba2+ ion dissolution with different pH and amount of PAA on microstructural changes of green and sintered bodies and its electrical properties was studied in aqueous nano-size BaTiO3 slurry system. The dissolution of Ba2+ was least at strong base, pH 10.8 and by addition of amount of 0.15 wt% PAA. The green body with the lowest of dissolution of Ba2+ at pH 10.8 and 0.15 wt% PAA had minimum values of average pore size, 40nm and shown high increase of sintered density. The compact sintered at 125$0^{\circ}C$ for 2 hr with highest Ba2+ dissolution had low density and dielectric constant due to abnormal grian growth. However, the sintered body with the lowest Ba2+ dissolution had high sintered density and then shown high dielectric constant.