• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.103-108
• /
• 2004

Carbon fiber reinforced composites(CFRP) were fabricated with phenolic resin matrix by hot press molding, and its surface was modified by the ion-assisted reaction process. When we tested the friction coefficient and wear rate variation and observed the effect of fibers with respect to friction and wear characteristics, the amount of pitch based carbon fiber was 45wt% and the average friction coefficient was the lowest at 0.12. When the amount of ion-irradiation was $1\times10^{l6}ions/cm^2$, the friction coefficient of the composites was about 0.12 and the wear mode was stable, whereas, the friction coefficient of the non-treated composites was about 0.16 and the wear mode was very unstable. But if the amount of ion-irradiation was $5\times10^{l6}ions/cm^2$$1\times10^{l6}ions/cm^2$ion-irradiation case.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.570-575
• /
• 2002

It is well-known that the bond strength between CFRP(Carbon Fiber Reinforced Plastic) and aluminum is significantly affected by the surface treatment of the CFRP and the aluminum. This study investigates the surface treatment of CFRP to improve the T-peel strength of CFRP/aluminum composites. The surface of %CFRP([0^0]_{14})$ was treated by the ion assisted reaction method under oxygen environment. T-peel strength tests were performed based on the procedure of ASTM D1876-95. The T-peel strength of surface-treated CFRP/aluminum composites was compared with that of untreated CFRP/aluminum composites. The results showed that the T-peel strength of surface-treated CFRP/aluminum composites was about 5.5 times higher than that of untreated CFRP/aluminum composites. SEM examination showed that the improvement of T-peel strength was attributed to the uniform spread and fracture of epoxy adhesive.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.782-785
• /
• 1997

In this study, the spectra was surface-treated using $Ar^+$ ion beam to improve the tensile property of spectra/vinylester composites. The effect of surface treatment on the tensile property of spectra/vinylester composites was investigated comparing tensile strength and stiffness of surface-treated spectra/vinylester composites with those of untreated spectra/vinylester composites. The results showed that the tensile strength and stiffness of surface-treated s spectra/vinylester composites were 12% and 22% higher than those of untreated spectra/vinylester composites.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.632-637
• /
• 2003

In this study, the effect of surface treatment of CFRP and aluminum on the fracture toughness of CFRP/aluminum composites was investigated. CFRP was surface-treated by Ar$^{+}$ ion beam under oxygen environment, and the aluminum was surface-treated by DC plasma. CFRP was adhesively bonded to aluminum using the secondary bonding procedure. Cracked lap shear specimens were used to determine fracture toughness. Three cases of cracked lap shear specimens were made depending on the surface treatment. The values of fracture toughness of three cases were compared to each other It was found that the fracture toughness of ion beam-treated CFRP/aluminum composites was almost 72 % higher than that of unrented CFRP/aluminum composites. The fracture toughness of CFRP/plasma-treated aluminum composites was 50 % higher than that of untreated CFRP/aluminum composites.s.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2771-2776
• /
• 2000

In this work, the effect of surface treatment of prepreg on the mode I fracture behavior was studied. Unidirectional (0-deg) double cantilever beam (DCB) specimens were used for fracture tests. Two groups of DCB specimens were made: the first group was made of prepregs surface-treated by Ar(sup)+ ion beam under oxygen environment and the second group was made of regular prepregs. For both groups, fracture resistance curve (R-curve) was determined and compared to each other, Results showed that resistance behavior of the first group is better than that of the second group. That is, mode I fracture toughness, G(sub)Ic of the first group is 24% larger than that of the second group. SEM examination shows that the improvement of G(sub)Ic is due to the increase of interfacial strength between plies.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.319-324
• /
• 2002

It is known that ion-assisted reaction method is effective for the surface modification of polymers. The surface treatment of Spectra fibers using the ion-assisted reaction method was investigated in the present study The Spectra fibers were treated by $Ar^{+}$ / ion irradiation under oxygen environment. The treatment was carried out at different $Ar^{+}$ ion doses. The$ Ar^{+ }$ /ion doses used were $6$\times$10^{15}$ , $1$\times$10^{16}$ , $5$\times$10^{16}$ , $1$\times$10^{17}$ / ions/$\m^2$. Optimal $Ar^{+}$ ion dose in the treatment of Spectra fibers was determined by measuring the tensile strength and modulus of Spectra/vinylester composites as a function of ion dose. It was found that the optimal ion dose was $1$\times$10^{16}$ions/$\m^2$. It was also found from the scanning electron microscope examination that the surface-treatment improved adhesion between fibers and vinylester resin.

• 생명과학회지
• /
• 제29권11호
• /
• pp.1294-1303
• /
• 2019

퍼클로레이트는 물에 용해도가 높고 안정되어 잔류하는 음이온성 오염물이다. 이 오염물은 토양/지하수는 물론 지표수, 먹는물, 식품, 어류, 농작물에도 검출이 되었다. 퍼클로레이트는 갑상선에 요오드가 흡수되는 것을 방해함으로써 대사조절에 중요한 갑상선 호르몬 생산을 감소시키는 것으로 알려졌다. 오염된 환경으로부터 퍼클로레이트를 제거하기 위한 다양한 기술이 개발되었으나 미생물에 의한 생분해가 가장 환경 친화적이고 경제적인 것으로 알려졌다. 그러나 염수와 같은 염이 있는 환경에서의 퍼클로레이트 생분해에 대한 정보는 비교적 제한적이다. 본 논문에서는 미생물을 이용한 염수의 퍼클로레이트 제거와 이와 관련된 미생물에 대해 기술하였다. 대부분 염수의 퍼클로레이트 생분해 연구는 acetate와 같은 유기물을 전자공여체로 사용하는 종속영양방식으로 이루어졌으며 폐재생액(염수) 내의 퍼클로레이트 처리에 중점을 두었다. 폐재생액은 퍼클로레이트로 오염된 지하수를 정화하는데 주로 사용되는 이온교환법에서 발생한다. 내염성 미생물을 농화배양하여 식종한 생물반응기를 통해 최고 10% NaCl 농도에서도 퍼클로레이트의 연속제거가 가능한 것으로 보고되었으나 장기적으로 안정적인 제거는 제시되지 않았다. 염수 내의 퍼클로레이트 제거에 사용된 생물반응기에는 주로 ${\beta}$-와 ${\gamma}$-Proteobacteria가 우세한 것으로 나타났다. 본 논문에서 기술한 이러한 정보는 생물공학기술 개발을 위해 염수의 퍼클로레이트 생분해에 대한 이해를 하는데 도움을 줄 것이다.