Journal of the Korea Society of Computer and Information
/
v.14
no.8
/
pp.97-106
/
2009
ABEEK, an independent non-governmental organization, is the recognized accreditor for the educational programs in engineering and related disciplines. ABEEK has developed the standard accreditation criteria to meet diverse needs of the engineering and related communities in Korea. A student attending at the accredited program has to complete the required courses and elective courses according to the curriculum flowchart to meet the accreditation criteria for a bachelor. Therefore an efficient and effective tool is necessary to support the adviser to monitor the completion of the required courses and elective courses according to the curriculum flowchart. In this paper, we describe an adviser tool developed. To develop an adviser tool. we established databases which contain the information of courses and their relations according to the curriculum flowchart. Adviser tool was developed to analyze student's DegreeAudit and represent the current completion information on the curriculum flowchart for effective monitoring. A closed test was performed and showed the increase of efficiency to meet the accreditation criteria for a bachelor.
Journal of Korean Tunnelling and Underground Space Association
/
v.14
no.3
/
pp.261-275
/
2012
This paper presents numerical analysis of the mud cake infiltration behaviour which is influenced tunnel face stability during excavation by slurry shield TBM. This analysis method can make useful data to select proper shield TBM type and to set up the construction plan. But effective analysis did not proposed until now. In this paper, we carried out numerical analysis using by $PFC^{2D}$ fluid coupling simulation which is suitable for sandy soil modelling. As a analysis result, we checked that the slurry infiltration behaviour varied with soil permeability and slurry characteristic(specific weight, viscosity etc). This analysis method is helpful safety excavation through anticipating the proper slurry viscosity at the design stage and verifying the slurry quality at initial excavation stage.
Proceedings of the Korea Water Resources Association Conference
/
2021.06a
/
pp.30-30
/
2021
우리나라 수리시설물 중 30년 이상 경과된 수리시설물은 전체의 61%를 차지하며, 특히 저수지의 경우 저수지의 약 84% 정도는 50년 이상 된 노후 저수지로 분류되고 있어 지속적인 보수·보강 필요하며 향후 기후변화에 취약할 것으로 예상된다. 이수측면에서 설계기준이 되는 설계한발빈도는 농업용 저수지의 내한능력을 나타내는 것으로 수리시설의 규모를 결정하는 기준이 된다. 국내의 경우 1982년 농지개량사업계획 설계기준 댐편에 한발빈도 10년 기준을 채택하여 사용되고 있으며, 현재 농업용 저수지의 이수안전도는 한발빈도 설계기준을 대신하여 사용하고 있다. 농업용 저수지의 이수안전도는 기존 설계기준에 의한 물수지법에 따른 저수지의 설계빈도로 산정되어 기후 및 영농변화, 용수수요의 변화, 농법의 변화 등 현장의 물관리 여건을 반영하는데 한계가 있다. 실제 저수지의 이수능력은 한발빈도 설계기준으로 대변되는 공급가능량 및 평야부 용배수로의 형상에 따라 농업용수 공급역량이 상이하므로, 평야부를 포함하는 농촌유역, 농촌공간의 이수안전도 개념이 도입되어야 한다. 또한 국가의 유관기관들은 특성 및 용도에 맞는 용수공급 정보를 생산하여 모니터링 자료를 제공하고 있지만, 실제 현장에서 체감하는 물 부족 및 이수관련 문제 해결을 위해 현장기반 데이터 활용이 필요하다. 본 연구에서는 기존 경험에 의한 관행적인 물관리 자료, 저수지 관련 계측 자료, 위성영상 자료, 비정형 미디어 데이터 등 이수 관련 분야의 빅데이터를 통합 구축하여 농촌유역 이수안전도의 개념을 정의하고자 한다.
This study was conducted to observe some characteristics of aneuploid trees obtained from the crosses between diploid and triploid in the first experiment. The results showed that the difference among the percentage of aneuploid's pollen grain germination was large, and all of them were lower than that of diploid 'Hongro' (82.4%). The average weight and size of each aneuploid's fruit was far lighter and smaller than that of diploid 'Hongro'. According to the width and length, all of the fruits shape was flat or short-globose conical shape except for JF3942. Almost all the aneuploid had higher sugar content than 'Hongro', nearly half of aneuploid fruits were firmer than that of diploid 'Hongro'. As for the acid contents of aneuploid fruits, the results were greatly different from those of previous studies on diploid apples, in present study the citric acid and tartaric acid contents were more than the malic acid which are dominant acid in most cultivars of apples. Both the length and width of aneuploid tree were shorter than that of diploid 'Hongro'. Most aneuploid trees' height was longer than width, but there were 4 exceptions. The size of leaves was smaller than that of diploid 'Hongro' according to the length and width of leaves measured. In all, aneuploid's vegetative growth is not as vigorous as diploid.
When $Al_2(SO_4)_3$ as an accelerator was added to $\beta$-hemihydrate gypsum, the setting time, mobility and compressive strength properties of $\beta$-hemihydrate gypsum were examined with the adding of two types grounded gypsum crushed by ball mill. By 15wt% adding of 7% $Al_2(SO_4)_3$ dilute solution, the setting time of $\beta$-hemihydrate gypsum was sharply accelerated than that of non-added $\beta$-hemihydrate gypsum. When ground phospho gypsum(PG) and chemical gypsum(CG) were added to $\beta$-hemihydrate gypsum, the initial and final setting time of $\beta$-hemihydrate gypsum were accelerated markedly with the increasing of grinding time and added amount of ground phospho gypsum. Especially, this trend largely presented when ground phospho gypsum was added to $\beta$-hemihydrate gypsum. The compressive strength of $\beta$-hemihydrate gypsum added by ground phospho and chemical gypsum was largely increased at initial curing time such as 1, 3 days. Particularly, the compressive strength of $\beta$-hemihydrate gypsum added by ground phospho gypsum was increased by 15~20% than that of ground chemical gypsum.
Proceedings of the Korea Water Resources Association Conference
/
2022.05a
/
pp.512-512
/
2022
국내 수자원 시스템은 이수 관련 기준과 이를 평가할 수 있는 지표 및 방법, 지침이 미흡한 실정으로 관련 시설물의 안정성과 형평성에 대한 문제가 제기되어 왔다. 농업용 저수지의 경우 한발 시 관개용수를 공급할 수 있는 내한능력, 기존 설계기준에 의한 물수지법에 따른 저수지의 설계한발빈도를 대체 사용하여 이수안전도를 산정하고 있으며, 설계한발빈도인 10년 한발빈도는 10년에 1회 정도의 갈수를 기준으로 한다. 농업용 저수지의 축조년도는 1940-1970년대로 약 86%가 축조된 지 50년 이상 경과하였고, 대부분 설계 한발빈도가 10년 이하로 축조되었으나 최근 발생하고 있는 기후변화, 용수관리 환경 변화, 수요량의 변화, 설계한발빈도 변화 등으로 현시점의 이수안전도 파악이 필요한 실정이다. 본 연구에서는 국가물관리기본계획에서 준용하고 있는 신뢰도 관련 이수안전도 기준인 이수안전율과 공급신뢰율을 활용하여 농업용 저수지의 이수안전도를 산정하고 기존 농업용 저수지의 이수안전도 기준인 10년 한발빈도와 비교함으로써, 농업용 저수지 이수안전도 산정기준의 적정성을 평가하고자 한다. 신뢰도 기준은 장기간 계획기간 동안 저수지의 용수부족이 얼마나 발생하는가에 대한 평가 방법으로 이수안전율은 최대 부족량과 수요량으로 산정가능한 양적기준 신뢰도이며, 공급신뢰율은 물공급부족기간으로 산정가능한 시간기준 신뢰도이다. 신뢰도 기준에 의한 방법은 저수지 모의 운영을 통한 물수지 분석을 실시하여 산정이 가능하며, 물수지 분석을 위해 한국농어촌공사에서 개발한 수리수문설계시스템 (K-HAS, Hydraulics & Hydrology Analysis System)을 사용하였다. 본 연구의 결과는 농업용 저수지의 이수관리 계획 수립 및 내한능력 평가 등 국가수자원정책의 지표로 활용할 수 있을 것으로 기대된다.
Journal of Korean Tunnelling and Underground Space Association
/
v.13
no.4
/
pp.347-370
/
2011
Slurry type shield would be very effective for the tunnelling in a sandy ground, when the slurry pressure would be properly adjusted. Low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. In tests slurry pressure was increased until the slurry flowed out of the ground surface or the ground fails. Location and dimension of the impermeable layer were varied. As results, the maximum and the excess slurry pressure in sandy ground were linearly proportional to the cover depth. Larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0 ~ 1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5 ~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.
Slurry type shield would be very effective for the tunnelling in a sandy ground, but low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. As results, larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0~1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.
This study aims to consider the subject completion system based on high school credit system in State of California. To achieve research aims, this study analyzed a characteristics of curriculum of credit system in US, subject completion system based on high school credit system in State of California. Based on analysis results, this study search implications for implementing high school credit system in korea. For stable implement of High School Credit System, This study proposed that 'review of relevance of graduation requirement credit', 'effort in Metropolitan and Provincial office of education and School for establishing meaningful subject', 'taking follow-up action in accordance with setting of subject completion standard', 'qualitative improvement of student's subject selection', 'revitalization of career coaching for meaningful subject selection', 'setting of level on connectivity between high school curriculum and university entrance examination', 'a study on the in-depth follow-up about high school curriculum based credit system in foreign country'.
Woon Sang Yoon;Yoosung Kim;Hyeongjin Jeon;Yoonho Song;Changhyun Lee
The Journal of Engineering Geology
/
v.34
no.2
/
pp.217-228
/
2024
During deep drilling, confined aquifers can present various challenges such as the inability to remove cuttings, rapid groundwater influx, and mud loss. Particularly in flowing well conditions, it is essential to apply the suitable mud density since the aquifer can generates an overpressurized condition. This paper proposes a method for determining the suitable mud density while drilling (SMD) through confined aquifers using mud window analysis and applies it to a case study. The minimum mud density at each depth, which represents the lower limit of the mud window, is determined by the equivalent mud density pore pressure gradient (or by adding a trip margin) at that depth. The pore pressure gradient of a confined aquifer can be calculated using the piezometric level or well head pressure of the aquifer. As the borehole reaches the confined aquifer, there is a significant increase in pore pressure gradient, which gradually decreases with increasing depth. The SMD to prevent a kick can be determined as the maximum value among the minimum mud densities in the open hole section. After entering the confined aquifer, SMD is maintained as the minimum mud density at the top of the aquifer during the drilling of the open hole section. Additionally, appropriate casing installation can reduce the SMD, minimizing the risk of mud loss or invasion into the highly permeable aquifer.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.