• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.555-559
• /
• 2001

Feed and spindle motor currents are used toi monitor the cutting process practically. The sensitivity of spindle drive system is lower than that of feed drive system, but the cutting torque is represented well by the spindle motor current. During multi-axis cutting, it is difficult to calculate the resultant cutting force using feed motor currents, because each feed force is reflected by each axis feed motor current with different time delay. It is also difficult to compensate the frictional torque using the feed motor current, because the magnitude of the frictional torque is dependent of the feedrate, table position, and cutting direction. On the other hand, cutting torque can be estimated well using spindle motor current which is independent of the cutting direction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.781-784
• /
• 2005

The feed drive inclination significantly influences product quality, machine tool accuracy and life time. However, the accurate measurement of the inclination needs the skilled engineers and the accurate leveling instruments such as spirits or electric levels. In this study a novel methodology for the estimation of inclination angle of machine tool feed drive is proposed. The proposed methodology utilizes the motor current signals and a new mathematical model of machine tool feed drive considering inclination. The experiment results showed that the proposed method successfully estimates the inclination angle, as well as newly proposed model also enhances the accuracy of the machine tool feed drive model by introducing the inclination effects.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.1-6
• /
• 2015

Tool condition monitoring plays one of the most important roles in the improvement of both machining quality and productivity. In this regard, various process signals and monitoring methods have been developed. However, most of the existing studies used cutting force or acoustic emission signals, which posed risks of interference with the machining system in dynamics, fixturing, and machining configuration. In this study, a feed motor current signal is used as a process signal representing process and tool states in tool breakage monitoring based on an adaptive autoregressive model and unsupervised neural network. From the experimental results using various cases of tool breakage, it is shown that the developed system can successfully detect tool breakage before two revolutions of the spindle after tool breakage.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.31-37
• /
• 1996

This Paper is concerned with effective signal identification method for tool breakage and micro chipping using discrete wavelet transform of feed motor current in milling operations. The wavelet transform uses an analyzing waveletfunction which is localized in both frequency and time domain to detect subtle time localized changes in input signals. The changing pattern of wavelet coefficient is continuously compared to detect tool breakage and micro chipping over one spindle revolution. The results indicate that the wavelet transform can identify tool failure with much greater sensi- tivity than the time domain monitoring and frequency domain monitoring such as FFT. Experimental results are presented to support the proposed scheme.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.156-161
• /
• 1992

본 연구에서는 이송축 직류 서보 모터의 전류신호와 NC정보를 이용해서 선삭 가공상태를 감시하는 시스템을 개발하였다. 모터 전류는 가공 부하의 상태를 잘 나 타내며, NC 장치에 내장되어 있기 때문에 신호 검출을 위한 별도의 센서가 필요 없어 서 공구가 수시로 바뀌는 NC작업 감시를 위한 유효한 신호이다. 또 NC 정보로부터 작업을 예측함으로써 감시 대상을 명확히 하고 신뢰성을 높이고자 하였다. 전체적인 감시 시스템의 프로그래밍 언어로는 C를 사용하여, 실시간 감시처리를 가능하게 하였 다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.150-156
• /
• 1996

Static variations of cutting forces are estimated using spindle motor current. Static sensitivity of spindle motor current is higher than feed motor current. The linear relationship between the cutting force and RMS value of the spindle motor current is obtained. Using cutting force estimation, tool overload in milling process can be well detected, and cutting force is regulated at a constant level by feedrate adaptive control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.319-319
• /
• 2004

최근 컴퓨터 기술의 급속한 발전과 함께, 생산품질의 향상과 생산주기의 단축을 목적으로 유한요소법(FEM)과 다물체 동역학(multi-body dynamics)과 같은 시뮬레이션 기술(math-based engineering)이 산업계 전반에 폭넓게 적용되고 있다. 생산시스템 분야에서는 디지털 생산기술(digital manufacturing) 및 가상 생산기술(virtual manufacturing)의 개념이 소개되면서 생산시스템의 모델링 및 시뮬레이션에 관한 연구가 활발히 시도되고 있다. 그러나 아직까지 대부분의 시뮬레이션 기술이 구조해석과 같은 제한적으로 부문에서만 활용되고 있는 실정이며, 시뮬레이션 모델은 대상이 되었던 몇몇 특수한 경우에 제한적으로 사용될 수 있는 등의 한계를 보여 왔다.(중략)

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.78-87
• /
• 1997

In machine tools, frictional force exists between the table and the guideways, and in ballscrews. In this paper, feed motor current measured by a hall sensor is used to calculate the motor torque. Some frictional phenomena are studied in feed drive systems, such as the relationship between feedrate and frictional torque, and chip cover effects on frictional torque. Considering frictional phenomena, the relation- ship between the feed froce and the feed motor current id obtained. Feed force can be well estimated by feed motor current measurement considering frictional behavior. The relationship between the cutting force and the feed motor current is slightly different between up milling and down milling due to the effect of y direc- tional cutting force on frictional torque.

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.15-27
• /
• 1997

Quasti-static cutting force variations in milling process are measured indirectly using spindle motor current. Quasi-static sensitivity of the spindle motor current is higher than that of the feed motor current. Magnitude of the spindle motor current is independent of cutting direction. The linear relationship between the cutting force and the spimdle motor RMS current at various spindle rotational speed is obtained. Frequency/ Voltage(F/V) converter voltage is measured to identify the spindle speed and to determine the cutting force at various spindle speeds. Overload on the tool during milling process can be detected using the proposed indirect cutting force measurement. Based on these measurements, cutting force is regulated at a constant level by feedrate control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1407-1410
• /
• 1997

Advanced sensor design and filtering technology have been studied to obtain information for condition monitoring and diagnostics inmachining processes. To develope and economic monitoring system in end milling processes, indirect and reliable type of cutting force estimators were required. In this paper, an estimation method of cutting forces during end milling processes was studied through the measurement of current signals obtained from spindle and feeddrive motors. Cutting force and torque models were derived from the cutting geometry in down milling processes. Relationships between motor currents and cutting forces were also developed in the form of AC and DC components from the developed force models. The validity of the cutting force estimator was confirmed by the experiments under various cutting conditions.