• Journal of Wind Energy
• /
• v.13 no.3
• /
• pp.33-42
• /
• 2022

In this paper, a semi-supervised machine learning technique applied to actual field vibration data acquired from Jeju-do wind turbines for predictive diagnosis of abnormal conditions of offshore wind turbines is introduced. Semi-supervised machine learning, which combines un-supervised learning with supervised learning, can be used to perform anomaly detection in situations where sufficient fault data cannot be obtained. The signal processing results using the spectrogram of the original signal were shown, and external data were used to overcome the problem that disturbance reactions easily occurred due to the imbalance between the number of normal and abnormal data. Out of distribution (OOD), which uses external data, is a technology that is regarded as abnormal data that is unlikely to occur in reality, but we were able to use it by expanding it. By rearranging the distribution of data in this way, classification can be performed more robustly. Specifically, by observing the trends of the abnormal score and the change in the feature of the representation layer, continuous learning was performed through a mixture of existing and new data.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.27-35
• /
• 2021

Recently, as a solution to the sharp drop in "power reserve ratio", it is being converted to a microgrid that enables bi-directional transmission and distribution. A microgrid is composed of a small-scale distributed power supply and a load. As a representative technology of distributed power generation, there is a Micro Combined Heat and Power system applied to homes and buildings. In this study, a safety standard was developed by dividing the power generation system, cooling system, lubrication system, and exhaust system to derive safety standards for a small gas engine power generation system with a gas consumption less than 232.6kW (200,000 kcal/h). In the case of the power generation system, a filter was installed and the system was stopped by detecting gas leakage and abnormalities in engine speed or output and the cooling system is stipulated to stop the system in case of insufficient cooling water or overheating. The lubrication system monitors the pressure and temperature of the lubricating oil and stops the system when an abnormality occurs, and the exhaust gas emission concentration regulation value was specified in accordance with domestic and foreign standards. Through the results of this study, it is judged that the safety of the gas engine power generation system can be improved and it can contribute to the commercialization of products.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.933-939
• /
• 2010

Gathering information and systemization of infrastructure disaster management is to reduce uncertainties in making decisions and maximize the number of alternations for reasonable decision making. The key object is the progress report & propagation automation system based on sensors, which is major for providing objective data to realize and support decision makings and delivering decision to a certain area, department, manager and other people rapidly. Collecting, reviewing and database of existing progress report & propagation manual in order to achieve networking of safety management on major social infrastructure of the nation, materialization of field-oriented intelligent business process by developing mobile safety management command transmission device and integrating it into facility safety management network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.723-729
• /
• 2014

When the bluetooth technology of smartphone is applied to a remote control system, communication errors caused by wave attenuation and interference results in the shortening of communication distance, loss of the target device control and malfunctioning. In this study, we propose a method to adopt a retransmission persistence controlled S/W ARQ in bluetooth communication to minimize the effect of the communication failure and to detect and handle the state where the target device gets lost control. We implemented a motor-driven RC car equpped with a bluetooth communication module and a steering application program on smartphone to test the proposed method. The experiments are conducted in three communication environments, and have resulted in the increase of the communication distance by at least 30% when S/W ARQ is applied. Moreover, when the communication was disrupted due to environmental disturbances, the S/W ARQ based system stopped immediately any undergoing operations to avoid possible malfunction.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.45-52
• /
• 2017

This paper proposes a new strategy of emotion-based music visualization. Emotional LED lighting control system is suggested to help audiences enhance the musical experience. In the system, emotion in music is recognized by a proposed algorithm using a dimensional approach. The algorithm used a method of music emotion variation detection to overcome some weaknesses of Thayer's model in detecting emotion in a one-second music segment. In addition, IRI color model is combined with Thayer's model to determine LED light colors corresponding to 36 different music emotions. They are represented on LED lighting control system through colors and animations. The accuracy of music emotion visualization achieved to over 60%.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.1
• /
• pp.72-77
• /
• 2008

Identification of humans from multiple view points is an important task for surveillance and security purposes. For optimal performance the system should use the maximum information available from sensors. Multimodal biometric systems are capable of utilizing more than one physiological or behavioral characteristic for enrollment, verification, or identification. Since gait alone is not yet established as a very distinctive feature, this paper presents an approach to fuse face and gait for identification. In this paper we will use the single camera case i.e both the face and gait recognition is done using the same set of images captured by a single camera. The aim of this paper is to improve the performance of the system by utilizing the maximum amount of information available in the images. Fusion in considered at decision level. The proposed algorithm is tested on the NLPR database.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.687-692
• /
• 2024

The energy crisis is emerging as a serious problem around the world. In the case of Korea, there is great interest in energy efficiency research related to industrial complexes, which use more than 53% of total energy and account for more than 45% of greenhouse gas emissions in Korea. One of the studies is a study on saving energy through sharing facilities between factories using the same utility in an industrial complex called a virtual energy network plant and through transactions between energy producing and demand factories. In such energy-saving research, data collection is very important because there are various uses for data, such as analysis and prediction. However, existing systems had several shortcomings in reliably collecting time series data. In this study, we propose an intelligent IIoT platform to improve it. The intelligent IIoT platform includes a preprocessing system to identify abnormal data and process it in a timely manner, classifies abnormal and missing data, and presents interpolation techniques to maintain stable time series data. Additionally, time series data collection is streamlined through database optimization. This paper contributes to increasing data usability in the industrial environment through stable data collection and rapid problem response, and contributes to reducing the burden of data collection and optimizing monitoring load by introducing a variety of chatbot notification systems.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1507-1514
• /
• 2018

The purpose of this study was to propose a functional improvement solution of integrated control board for safe driving of Smart electric wheelchair for a single person. In the case of existing electric wheelchair products in Korea and elsewhere, safety-related functions or devices are not included in many cases. Therefore, the incidence of electric wheelchair-related accidents is continuously increasing in the current situation in which the elderly and the disabled people have been continuously increased. However, currently only high and middle-priced products are equipped with basic safety devices in electric wheelchairs, so low-priced products require safety related functions. Therefore, sensing obstacles that the user can not recognize while moving an electric wheelchair and detecting automatically the terrain change to control the motor by developing a smart control platform. This provides an integrated control board that can be applied to various electric wheelchairs for more stable driving.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.57-62
• /
• 2021

Gas is an energy source widely used in general households and industrial sites, and is also a process material widely used in petrochemical and semiconductor processes. However, while it is easy to use, it can cause large-scale human damage due to leakage, explosion, and human inhalation. Therefore, a gas facility safety management solution that can be safely used at home and industrial sites is essential. In particular, the need to develop advanced gas safety solutions is emerging as gas facilities are aging. In this paper, a technology was developed to measure the presence and concentration of gas leaks from a distance by irradiating photons, the minimum energy unit that can no longer be divided into gas facilities, and analyzing the number of reflected photons. This overcomes technical limitations such as short detection distance and inability to detect fine leaks, which are the limitations of conventional electric/chemical gas sensors or infrared-based gas leak detectors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.135-140
• /
• 2021

In this paper, we propose an on-line mechanism that simultaneously detects cracks and profiling pavement blocks to detect the displacement of ground surface adjacent to the excavation in the urban area. The proposed method utilizes a 2D laser to profile the information about pavement blocks including the depth and distance among them. In particular, it is designed to enable the detection of cracks and portholes at runtime. For the experiment, real data was collected through Gocator, and trainng was carried out using Faster R-CNN. The performance evaluation shows that our detection precision and recall are more than 90% and the pavement blocks are profiled at the same time. Our proposed mechanism can be used for monitoring management to quantitatively detect the level of excavation risk before a large-scale ground collapse occurs.