• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1611-1616
• /
• 2010

The purpose of this research was to determine the effect of surfactant micelles on lipid oxidation in W/O/W multiple emulsions. The content of ferric irons and hydroperoxide in the continuous phase in W/O/W multiple emulsions was measured as a function of Brij micelle. The concentration of ferric iron and hydroperoxide in the continuous phase increased with increased storage time (1~6 days). Lipid oxidation rates, as determined by the formation of lipid hydroperoxides, TBARs and headspace hexanal, in the W/O/W multiple emulsions containing ferric iron decreased when 3% surfactant micelles were exceeded. These results indicate that excess surfactant micelles could alter the physical location and prooxidant activity of iron in W/O/W multiple emulsions.

• Resources Recycling
• /
• v.10 no.6
• /
• pp.15-21
• /
• 2001

Shape-controlled copper oxides have been recovered from copper-containing waste etchant by neutralization with alkalihydroxide. Large amount of copper-containing waste etchant is generated from Printed Circuit Board industry. In an environmental and economic point of view, retrieve of the valuable natural resource from the waste is important. In recycling process of copper oxide from the waste etchant, reaction temperature controls shapes and sizes of the products. Copper oxide recovered below reaction temperature $40^{\circ}C$ was of a needle shape, while copper oxide comes in a platy shape above $40 ^{\circ}C$ . Physical properties of samples have been characterized using SEM, XRD, TGA and Atomic absorption spectroscopy.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.3
• /
• pp.95-101
• /
• 2015

In this article, we report the fabrication of Li-rich oxide nanoparticles for Li-ion batteries. Li-rich oxides are promising cathode materials because their capacity is much higher than commercial cathode materials. However, they have several disadvantages such as low rate capability due to their low ionic and electronic conductivity. This study focuses on the fabrication of nanoparticles to enhance the rate capability of Li-rich oxide. Two types of surfactants were introduced to disperse the particles and form the nano-sized particles. The Li-rich oxide nanoparticles showed improved rate capability than pristine sample.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.183-194
• /
• 2002

Biotite and its weathering Products in the weathering Profile of Andong granite were examined using X-ray diffraction, chemical analysis, and electron microscopy. Major weathering product of biotite was oxidized biotite, which is decomposed into kaolinite in the upper part. Discrete vermiculite or hydrobiotite was not detected although minor vermiculite (5%) was randomly interstratified with oxidized biotite. Excess positive charge induced by iron oxidation was balanced by release of Fe (16%) and Mg (12%) from octahedral site and K (13%) from interlayer site. After slight chemical and structural modification induced by iron oxidation, oxidized biotite persists through the weathering profiles with partial decomposition in the upper part of the profile. Formation environments and dissolution experiments of oxidized biotite highly resistant to weathering are required to understand the elemental behavior in the surface environments on the biotite-bearing bedrocks.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.352-360
• /
• 1993

A nitride layer was df'posited on the thermal oxide layer by LPCVD process. ONO(oxidenitricle oxide) capacitors with various thickness of component layer wore fabricated by wet reoxidation of the nitride with and without anrwalmg treatment and their properties were investigated. As a result of observation on the refrative index and etching behavior of the ONO fIlms, the nitride layer OF 40 A thick ness was not so dense that the bottom oxide during the reoxidation process and the capability of securing the capacitance decreased. The conduction current in the ONO multl-Iayer dielctric film was reduced as the bottom(or top) oxide layer became thicker. However, in the case of oxide with thickness more than 50A, it merely plays a factor of reduction in capacitance, and the effect of barrier for hole injection was not so much increased. Annealing of the nitride laypr bpfore reoxidation did not show a grpat effects on the refractive index and capacitance of the film, however, the annealing process increased the breakdown voltage by 2${\cdot}$V.

• Journal of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.117-125
• /
• 1974

The catalytic reaction between carbon monoxide and oxygen was investigated in the presence of catalysts which were specially treated by applying an annealing method at different monoxide and oxygen and at reaction temperatures in the region of partial pressures of carbon $40^{\circ}C$ to $95^{\circ}C$. The oxidation rate is highest on NiO annealed at low temperature in vacuum. The data has been correlated with the first order kinetics, and the activation energies from the Arrhenius equation are found to be 4Kcal/mole in the region of the experimental temperatures. The excess oxygen in NiO obtained from the decomposition of $NiCO_3$does not cause activation at $95^{\circ}C$. But NiO catalysts annealed again in vacuum display activation even at $40^{\circ}C$. The quantity of the excess oxygen in NiO surfaces seems to be the controlling factor in determining the rates of oxidation of carbon monoxide.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.64-75
• /
• 1998

The purpose of this study is to produce high putity composite powder composed of Fe-oxide, Mn-oxide and Mn-ferrite having superior homogencity in composition and particle size distribution by co-roasting process. Binary component metal (Fe, Mn) chloride solutions were produced by dissolving mill scale and ferro-mangancse alloy in hydrochloric acid. These chloride solutions contained the impurities such as SiO$_{2}$, P, Al, Ca and Na, which were originated from the Fe/Mn source materials. The neutralization and polymeric coagulant method were adoped to refine the hydrochloric liquor. When pH is far below the isoelectric point (pH 2-3), the SiO$_{2}$ was the most effectively reduced element, while other impurities remained unchanged. By increasing pH above 3, most of the impurities could be reduced effectively due to the coprecipitation reaction. The polymeric coagulants such as poly vinyl alcohol, resin amine and ammonium molybdate were found to have no effect on the spray roaster designed by the authors. The produced oxide powders were confirmed to be mixtures of Fe-oxide, Mn-oxide and mn-ferrite. the powders were homogeneously mixed and the particle size increased sleeply with increasing co-roasting temperature.

• Journal of the Korean Ceramic Society
• /
• v.13 no.3
• /
• pp.28-36
• /
• 1976

Zn 산화물을 산과 공기 그리고 헬륨 각각의 분위기에서 열처리 한 후 그 각각에 대한 열광성을 $83^{\circ}~300^{\circ}K$의 온도 범위에서 연구하였다. Zn 산화물의 열광성은 90$0^{\circ}C$ 이상의 온도에서는 산소의 부분압에 의존하며 그 최대강도는 1/T에 비례하였다. 이 성질을 유발한다고 믿어지고 있는 비화학양론적인 결함으 주 요인은 2개의 전자를 trap 하는 산호 이온의 vacancy라고 믿어지고 있다. Trap된 전자의 활성화에너지는 0.13ev였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.243-244
• /
• 2001

오존(O$_3$)은 성층권에서 태양광의 직접 지구 입사를 감소시키는 반면, 일반 대기 환경에서는 강력한 산화성과 더불어 최근 NOx, VOCs와의 연계성이 점차 밝혀지면서 최근 대기질 환경에 주요관심사가 되고 있다. 또한 지난 2000년 12개 도시에 52회의 0.3ppm이상의 고농도 오존 경보 발령으로 관리에 초점이 맞춰지고 있으나, 대기환경 중에서 자외선 등에 의한 2차 생성물질인 오존은 강력한 산화성으로 인해 표준물질이 없어 정확한 측정 및 관리에 어려움을 겪고 있다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.99-99
• /
• 2012

CrZrN의 3원계 박막은 상온에서 매우 우수한 기계적 특성을 나타내지만, 고온에서는 Zr의 산화로 인하여 기계적 특성이 저하되게 된다. 따라서 본 연구에서는 CrZrN 박막의 고온 특성을 개선하기 위해서 내산화성이 향상에 영향을 미치는 표면 산화물을 만들기 위한 산소 원소를 첨가하여 CrZrON 4원계 박막을 segment target을 이용해 합성하였고, 박막의 특성을 분석하였다.