• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.44-52
• /
• 2012

As an alternative strategy in the era of high level petroleum cost, the study focused to suggest the way on the revitalization of renewable energy through the impact on introduction effect of renewable energy in green village. Total feasible solar energy production is 6.73 GWh/yr along with the biomass energy producing electric power energy is 134.06 GWh/yr, the two category's total electric power energy is 233.19 GWh/yr, which is possible to achieve the selfsufficiency of energy by 33% for total energy consumption of 705.80 GWh/yr in the region. The calculated feasibility on the carbon dioxide reduction, carbon dioxide reduction level is 1,891 ton_$CO_2$ by agricultural byproducts, 43,635 ton_$CO_2$ by livestock waste, 395 ton_$CO_2$ by municipal waste, 50,324 ton_$CO_2$ by forest byproducts, the total biomass shows 96,245 ton_$CO_2$, while the carbon dioxide reduction of solar light energy is 2,251 ton_$CO_2$, 1,383.3 ton_$CO_2$ by solar heat energy, the total solar energy shows 3,634 ton_$CO_2$. So total carbon dioxide reduction effect shows 99,879 ton_$CO_2$.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.1-9
• /
• 2014

UN-REDD (United Nations programme on Reducing Emissions from Deforestation and forest Degradation in Developing Countries) and AR-CDM (Afforestation/Reforestation-Clean Development Mechanism) is currently being emerged as one of important mechanism to reduce carbon dioxide in relation to the deforestation. Discussion on North Korea as UN-REDD/AR-CDM project target continues with a view to preventing deforestation and to securing CER(certified emission reduction) for South Korea. The forests in Mt. Baekdu are degraded, deforestation is occurred, nevertheless, portion of forested area is still high, where both REDD and AR-CDM investment potential are quite high. Accordingly, this study is intended to explore a simultaneous registration potential to UNREDD/AR-CDM for Mt. Baekdu although separate registration to UN-REDD or AR-CDM has already gained worldwide recognition as a typical method in the process of GHG (Greenhouse Gas) reduction project. The results indicate that selecting UN-REDD or AR-CDM in accordance with sub-watershed forest condition could capture 53.2% more carbon dioxide than REDD alone and 21.9% more than AR-CDM alone. It is anticipated that this research output could be used as a realistic evidence to introduce carbon sequestering project in accordance with sub-watershed forest condition.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.164-175
• /
• 2011

Using natural electromagnetic (EM) fields at low frequencies, magnetotelluric (MT) surveys can investigate conductivity structures of the deep subsurface and thus are used to explore geothermal energy resources and investigate proper sites for not only geological $CO_2$ sequestration but also enhanced geothermal system (EGS). Moreover, marine MT data can be used for better interpretation of marine controlled-source EM data. In the interpretation of MT data, MT modeling schemes are important. This study improves a three dimensional (3D) MT modeling algorithm which uses edge finite elements. The algorithm computes magnetic fields by solving an integral form of Faraday's law of induction based on a finite difference (FD) strategy. However, the FD strategy limits the algorithm in computing vertical magnetic fields for a topographic model. The improved algorithm solves the differential form of Faraday's law of induction by making derivatives of electric fields, which are represented as a sum of basis functions multiplied by corresponding weightings. In numerical tests, vertical magnetic fields for topographic models using the improved algorithm overcome the limitation of the old algorithm. This study recomputes induction vectors and tippers for a 3D hill and valley model which were used for computation of the responses using the old algorithm.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.83-91
• /
• 2014

The global community demands the reduction of environmental pollution such as greenhouse gas and carbon dioxide emissions. According to these requirements, the road construction project in the highest energy consuming industry is required the efficient way of reducing environmental pollution emissions. In this study, during the whole life cycle process, an environment impact assessment was performed for the several road construction projects in order to evaluate environmental stress through the road construction process. This study provides a proper process of environment impact assessment for life cycle assessment (LCA) analysis of road construction project, and figures the environmental stress regarding to the major construction materials for the case projects. In addition, this study conducted a sensitivity analysis for the key materials of environmental stress through the quantity analysis of major materials for the 1km section of a road construction. By this sensitivity analysis of total environmental stress change from the different volumes of constructing materials, it would be useful information for the environment impact assessment for the future road construction project.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.500-507
• /
• 2010

Regard to the global warming, the shipping industries are progressed the dedicated endeavor to reduce greenhouse gas. As the study results of 2009 GHG study team, the $CO_2$ emission of shipping industries exceeded slightly 1.0 billion ton during one year(2007) and it is 3.3% of total $CO_2$ amount exhausted from all industries. This paper are introduced the energy efficiency design index / operation indicator monitoring system(EDiMS) which matched with EVAMOS software released by the dynamics laboratory of Mokpo maritime university. EDiMS can continuously be monitored amounts of $CO_2$, NOx, SOx, and PM emitted from ship and it can be applied as the useful tool of the inventory work of air pollution and the ship energy management plan for the mitigation or reduction of ship emission.

• Korean Journal of Food Science and Technology
• /
• v.45 no.2
• /
• pp.191-198
• /
• 2013

The storage quality of fresh Sulhyang strawberries packaged under modified atmospheres was investigated to examine the effect of high $O_2$ on the fruit. Fresh strawberries were packed into PP trays and top-sealed with PET/PP film. Initial gas compositions inside the packages were varied with air, 40% $O_2$/60% $N_2$, 60% $O_2$/40% $N_2$, and 80% $O_2$/20% $N_2$. Sealed packages in PE film bags with air and perforated PP trays were also used as another treatment and control, respectively. Quality attributes and viable cell counts of pathogenic bacteria were assessed during storage at $5^{\circ}C$ for 12 days. High $O_2$ concentration showed no significant effects on the physicochemical and microbial qualities of strawberries. Fruit packaged in PE film bags with 6-15% $O_2$ and 7-9% $CO_2$ during storage had the lowest viable cell counts of inherent microorganisms among the treatment samples. Growth of pathogenic bacteria was suppressed in perforated packages where molds occurred frequently. In an overall sensory aspect, the PE film packages exhibited higher scores than the others at the end of storage period. The experimental results suggested that gas-permeable film packaging with an appropriate combination of $O_2$ and $CO_2$ rather than gas-barrier tray packaging with an initially high $O_2$ concentration would be suitable for improving the storability of strawberries.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.901-908
• /
• 2014

Blueberries and strawberries are highly perishable and easily contaminated with microorganisms. To maintain the quality of these commodities during refrigerated storage, the effects of two packaging materials as well as passive modified atmosphere packaging on the quality of blueberries and strawberries were investigated. The harvested blueberries and strawberries were first treated with combined non-thermal treatment of aqueous chlorine dioxide and fumaric acid, followed by packaging with polyolefin film (6,000 mL $O_2/m^2{\cdot}24hr{\cdot}atm$ at $24^{\circ}C$) and polyamide/polyamide/polyethylene film (PA/PA/PE, 60 mL $O_2/m^2{\cdot}24hr{\cdot}atm$ at $24^{\circ}C$), respectively. After combined sanitizer treatment, the populations of total aerobic bacteria in blueberries and strawberries were reduced by 2.50 and 1.97 log CFU/g while those of yeast and molds were reduced by 1.95 and 2.18 log CFU/g, respectively, compared with the control. In particular, microbial growth in these samples packed with PA/PA/PE film was reduced during refrigerated storage. In addition, the blueberries and strawberries packed with PA/PA/PE film underwent lower weight loss than those packed with polyolefin film during storage. These results suggest that appropriate packaging with proper gas permeability is necessary to maintain the quality of blueberries and strawberries during refrigerated storage.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.123-128
• /
• 2020

γ-dicalcium silicate(γ-C₂S) is known as a polymorphism of belite. Due to its high CO₂ fixing capacity and the production process with low CO₂ emission, γ-C₂S has attracted more attention of researchers. For the further development of γ-C₂S applications in construction industry, this study aims to investigate the method for synthesizing high purity of γ-C₂S. The influence of raw materials and calcination temperatures on the purity of γ-C₂S was evaluated. Several Ca bearing materials were selected as the calcium source, the materials which's main component is SiO₂ were used as the silicon source. Raw materials were mixed and calcined under different temperatures. The results revealed that the highest purity could be obtained using Ca(OH)₂ and SiO₂ powder as raw materials. In addition, a relatively economic synthesis method using natural mineral materials-limestone and silica sand as raw materials were developed for the practical application. The purity of synthetic γ-C₂S was recorded up to 77.6%.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.44-54
• /
• 2014

A standard plastic garbage bag which was discarded from Incheon Metropolitan City was composed of 4.5% recyclable resources (aluminum cans 0.2%, steel cans 2.5%, glass 1.8%), 92.5% resources with recoverable energy (papers 23.0%, plastics 15.5%, combustible etc. 54.0%) and 3.0% non-combustible etc. Recycling is more effective than landfilling for aluminum cans, steel cans, and glass. The energy recovery process using solid refuse fuel (SRF) is more effective than incineration for papers and plastics. Incineration is more effective than recycling for combustible etc. 2,068,948 Million Btu of total energy savings and 21,008 $MTCO_2E$ of total GHG reductions were obtained by the application of the proposed scheme. The total energy savings were equivalent to an economic benefit of 422 billion won per year. The total GHG reductions were equivalent to a GHG benefit of 4,119 passenger cars not running per year. The lower calorific value of the combustible materials was obtained to be 1,936 kcal/kg of papers, 5,079 kcal/kg of plastics and 2,462 kcal/kg of combustible other resources, respectively. If papers and plastics are properly mixed, the mixture can be used as SRF. The lower calorific value of combustible other resources does not meet the quality criteria for refuse derived fuel, therefore its components are inappropriate to used as solid refuse fuel.

• Environmental and Resource Economics Review
• /
• v.15 no.1
• /
• pp.27-50
• /
• 2006

We estimate $CO_2$ emissions in Korea industry, 1990 and 2000 using a commodity- by-industry IO model ($CO_2$ hybrid IO mode]). Estimated $CO_2$ emissions in industries include both $CO_2$ emissions from direct and indirect consumption. The results show that total $CO_2$ emissions has increased by 51.6 million TC (Tonne of Carbon) from 64.4 million TC in 1990 to 115.5 million TC in 2000. By applying the structural decomposition analysis technique, we decompose change of $CO_2$ emissions in Korea industry between the period 1990~2000. In the decomposition, we figure out two contributing factors, changes in $CO_2$ coefficient and changes in final demand. The latter is further decomposed as growth effects and structural effects. We also estimated each factor's contribution to the changes in $CO_2$ emissions in industries between 1990~2000. The analysis can be used as a useful resource for policy makers in improving the effectiveness of $CO_2$ emissions mitigation policy.