• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.121.2-121.2
• /
• 2011

석탄가스화복합발전과 연계하여 사용할 수 있는 $CO_2$분리법으로 연소 전 탈탄소화는 연료가 연소되기 전에 $CO_2$를 회수하는 방법으로 현재 여러가지 분리법이 사용되고 있다. 본 연구에서는 가스 하이드레이트의 다양한 응용 분야 중 이산화탄소 격리분야에서 합성가스로부터 $CO_2$롤 효과적으로 분리/회수하기 위하여 가스 고형화법에 관한 연구를 진행하였다. 가스 하이드레이트 형성과정에서의 반응 특성을 살펴보기 위하여 순수계와 촉진제 첨가계(TBAB, TBAF, THF)에 대하여 반응시간에 따른 가스소모량 및 기상의 $CO_2$ 조성 변화를 측정하였다. 그 결과 하이드레이트 상에 고농도의 $CO_2$가 포집되는 것을 확인 할 수 있었다. 순수계와 THF 첨가계의 경우 가스 소모량이 다른 계에 비하여 높게 나타났다. 이는 순수계의 경우 구조-I의 큰 동공과 작은 동공에 모두 기체가 점유되기 때문이며, THF 첨가계의 경우 구조-II의 큰 동공에만 기체가 점유되지만 THF의 첨가로 인해 전환율이 증가되기 때문이다. 반면, TBAF와 TBAB 첨가계의 경우에는 상재적으로 낮은 가스 소모량을 보였다. 기체 소모량이 큰 경우 최종 기상의 $CO_2$ 조성이 낮게 나타났다. 그리고 모든 실험조건에서 1시간 이내에 하이드레이트 형성반응이 종결되는 것을 확인할 수 있었다. 또한, 촉진제 첨가에 의한 하이드레이트의 구조적인 변화를 확인하기 위하여 Raman 분광법과 $^1H$-NMR을 이용하여 혼합가스 하이드레이트를 분석하였다. 본 실험으로 얻어진 결과는 가스 고형화법을 이용한 합성가스 분리 공정 설계 및 개발에 중요한 기초자료가 될 것으로 사료된다.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.424-434
• /
• 2012

In this study, a ceramic membrane was prepared by CVD. Tube type alpha alumina support was used for substrate and added the Ga salt in intermediate layer. Synthesized method was counter diffusion CVD method at $650^{\circ}C$ with tetramethylorthosilane (TMOS). Gas permeation was measured at $600^{\circ}C$ using single-component $H_2$, $N_2$, $CO_2$ and $CH_4$. During the steam treatment, $H_2/N_2$ permselectivity of non-Ga silica membrane was decreased 926 to 829 at $600^{\circ}C$. On the other hand $H_2/N_2$ permselectivity of added Ga silica membrane was stable 910 to 904 at $600^{\circ}C$. These results show that the metal-doped membranes improved steam stability for gas separation.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.555-564
• /
• 2016

In recent years, methanol has attracted much attention since it can be cleanly manufactured by the combined use of atmospheric $CO_2$ recycling and water splitting via renewable energy. For the concept of "methanol economy", an active methanol synthesis catalyst should be prepared in a sophisticated manner rather than by empirical optimization approach. Even though Cu/ZnO-based catalysts prepared by coprecipitation are well known and have been extensively investigated even for a century, fundamental understanding on the precipitation chemistry and catalyst nanostructure has recently been achieved due to complexity of the necessary preparation steps such as precipitation, ageing, filtering, washing, drying, calcination and reduction. Herein we review the recent reports regarding the effects of various synthesis variables in each step on the physicochemical properties of materials in precursor, calcined and reduced states. The relationship between these characteristics and the catalytic performance will also be discussed because many variables in each step strongly influence the final catalytic activity, called "chemical memory". All discussion focuses on how to prepare a highly active Cu/ZnO-based catalyst for methanol synthesis. Furthermore, the preparation strategy we deliver here would be utilized for designing other coprecipitation-derived supported metal or metal oxide catalysts.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.138-153
• /
• 2015

For preventing the biological damage domestically, insect damage control method using chemical medicine has been applied. However, it is trend to avoid existing chemical medicine such as Methyl bromide because of the problem of being harmful to human body and environment. Therefore, the research for new medicine to replace this has been done and the interest to the physical treatment such as temperature(high & low) treatment, hypoxic treatment, carbon dioxide treatment, and radiation treatment has increased. However the systematic application standard and way has not been established. Therefore, in this research, we are going to organize present condition of domestic cultural asset preventing biological damage after the 1980's. It will also consider the direction through the characteristic of technology, limit, and replacement medicine by examining the past research.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.119-125
• /
• 2023

It is necessary to reduce aviation GHG(CO2) emission to ensure aviation sustainable development. Operational improvements may not contribute significantly to carbon reduction but it can sustatially reduce emission in a short term. ICAO has developed GANP and ASBU to optimize operations and countries are making efforts to expand infrastructure and develop technology. The legal barriers to operational improvement are based on the notion of state sovereignty under the Chicago Convention which allows countries to control inefficiencies based on borders or limit or prohibit the passage of aircraft. Chicago Convention does not grant unlimited freedom of air sovereignty and if the concept of state sovereignty is interpreted according to the times it is possible to achieve smooth operational improvement.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.249-255
• /
• 2022

In this study, a new method for the analysis of high-purity nitrogen was developed. A gas chromatography-flame ionization detector (GC-FID) was used for purity analysis. Certified reference materials (CRMs) at a level of 3 µmol/mol of carbon monoxide (CO), carbon dioxide (CO₂), and methane (CH₄), which may exist in high-purity nitrogen, were prepared using the gravimetric method, and these CRMs were used for purity analysis. In this new method, ultra-high-purity and high-purity nitrogen were used as carrier gases. The impurities in high-purity nitrogen were quantitatively analyzed by comparing the differences in the area values of the GC chromatograms of the prepared CRMs. We purchased liquid nitrogen and three bottles of nitrogen gas, which were produced by three different manufacturers, using high-purity nitrogen. Furthermore, to validate the developed purity analysis method, the fraction of impurities in high-purity nitrogen was compared with the results of the typical purity analysis method. The comparison results were consistent within the expanded uncertainties (k = 2).

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.99-110
• /
• 2018

In this study, oil of Platycodon grandiflorum seeds was prepared using supercritical carbon dioxide extraction (SCE) and its physicochemical indices as a new edible oil were investigated. Compared to Soxhlet solvent extraction, SCE under the condition of 6,000 psi at $40^{\circ}C$ produced more oil, especially from the roasted seeds to 32.7%. TLC analysis showed triacylglycerols accounted for most of the oil obtained from roasted Platycodon grandiflorum seeds by SCE similarly to commercial soybean oil or perilla seeds oil. The oil had highly unsaturated lipid with considerable amount of linoleic acid(73.27%) much more than two commercial oils followed by oleic acid(13.16%). Physicochemical properties of the oil were as follows; specific gravity, 0.92; dynamic viscosity, 45.37 cP; refractive index, 1.48; color, L=47.30, a=-3.69, b=25.72; iodine value, 141.57 g $I_2/100g$ oil; saponification value, 191.21 mg of KOH/g of oil; acid value, 2.60 mg of KOH/g of oil. Among those, refractive index, viscosity and iodine value, which were related to unsaturation degree of lipid, were ranged between those of two commercial oils. The oxidation stability of oil(2.03 hr) was also ranged between less stable perilla seeds oil(1.79 hr) and more stable soybean oil(2.94 hr) based on the induction time measured by Rancimat assay. In addition to extraction yield increase, seeds roasting provided further benefits such as reductions of cholesterol ester content and acid value without change in fatty acid composition. In conclusion, oil was extracted from the roasted Platycodon grandiflorum seeds at high yield by supercritical carbon dioxide and it seemed to have proper characteristics as a edible oil.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.751-755
• /
• 2005

Carbon dioxide, included in the flue gas from the combustion of fossil fuel, was known as a representative green house gas and various removal and utilization technologies of it has been studied for the prevention of global warming. This study was performed as an effort to find out a method to reuse carbon dioxide separated from flue gas by magnetite powder. Magnetite powder was synthesized using various oxidizers and alkalinity controlled aqueous solutions of $FeSO_4{\cdot}7H_2O$ and NaOH at 50, 80, 90, $100^{\circ}C$ and analyzed by XRD and SEM. The analysis results showed that magnetite powder synthesized at higher alkalinity and temperature had crystalline spinel and cubic structure. The reduction by hydrogen and the oxidation by carbon dioxide of synthesized powder were studied by TGA. The results showed that magnetite powder synthesized at low alkalinity and temperature was non-cubical amorphous but crystalline and cubical at high alkalinity and temperature. Comparing magnetite powders synthesized using oxidants(air and oxygen) and nitrogen, magnetite powder using more oxygen containing oxidant synthesized more crystalline magnetite powder. The experimental results of redox reaction of the synthesized magnetite powder showed that the reduction by hydrogen and the oxidation by carbon dioxide were seldom observed below $400^{\circ}C$ and observed well at $500^{\circ}C$. Magnetite powder synthesized at $100^{\circ}C$ and alkalinity(molal concentration ratio of $FeSO_4{\cdot}7H_2O$ to NaOH) of 2.0 using $O_2$ showed the highest reduction of 27.15 wt％ and oxidation of 26.73 wt％, especially at reaction temperature of $500^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.101-111
• /
• 2017

Mineral carbonation is a technology in which carbonates are synthesized from minerals including serpentine and olivine, and industrial wastes such as slag and cement, of which all contain calcium or magnesium when reacted with carbon dioxide. This study aims to develop the mineral carbonation technology for commercialization, which can reduce environmental burden and process cost through the reduction of carbon dioxide using steel slag and the slag reuse after calcium extraction. Calcium extraction was conducted using NH4Cl solution for air-cooled slag and convert slag, and ${\geq}98%$ purity calcium carbonate was synthesized by reaction with calcium-extracted solution and carbon dioxide. And we conducted experimentally to minimize the quantity of by-product, the slag residue after calcium extraction, which has occupied large amount of weight ratio (about 80-90%) at the point of mineral carbonation process using slag. The slag residue was used to replace silica sand in the manufacture of cement panel, and physical properties including compressive strength and flexible strength of panel using the slag residue and normal cement panel, respectively, were analyzed. The calcium concentration in extraction solution was analyzed by inductively coupled plasma optical emission spectrometer (ICP-OES). Field-emission scanning electron microscope (FE-SEM) was also used to identify the surface morphology of calcium carbonate, and XRD was used to analyze the crystallinity and the quantitative analysis of calcium carbonate. In addition, the cement panel evaluation was carried out according to KS L ISO 679, and the compressive strength and flexural strength of the panels were measured.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2021

This study aimed to fundamentally understand structural changes of zeolite under pressure and in the presence of different pressure-transmitting media (PTM) for application studies such as immobilization of heavy metal cation or CO₂ storage using pressure. High-pressure X-ray powder diffraction study was conducted on the zeolite-W (K_6.4Al_6.5Si_25.8O₆₄× 15.3H₂O, K-MER) to understand linear compressibility and the bulk moduli in different PTM conditions. Zeolite-w is a synthetic material having the same framework as natural zeolite merlinoite ((K, Ca_0.5, Ba_0.5, Na)₁₀ Al₁₀Si₂₂O₆₄× 22H₂O). The space group of the sample was identified as I4/mmm belonging to the tetragonal crystal system. Water, carbon dioxide, and silicone-oil were used as pressure-transmitting media. The mixture of sample and each PTM was mounted in a diamond anvil cell (DAC) and then pressurized up to 3 GPa with an increment of ca. 0.5 GPa. Pressure-induced changes of powder diffraction patterns were measured using a synchrotron X-ray light source. Lattice constants, and bulk moduli were calculated using the Le-Bail method and the Birch-Murnaghan equation. In all PTM conditions, linear compressibility of c-axis (𝛽^c) was 0.006(1) GPa^-1 or 0.007(1) GPa^-1. On the other hand, the linear compressibility of a(b)-axis (𝛽^a) was 0.013(1) GPa^-1 in silicone-oil run, which is twice more compressible than the a(b)-axis in water and carbon dioxide runs, 𝛽^a = 0.006(1) GPa^-1. The bulk moduli were measured as 50(3) GPa, 52(3) GPa, and 29(2) GPa in water, carbon dioxide, and silicone-oil run, respectively. The orthorhombicities of ac-plane in the water, and carbon dioxide runs were comparatively constant, near 0.350~0.353, whereas the value decreased abruptly in the silicone-oil run following formula, y = -0.005(1)x + 0.351(1) by non-penetrating pressure fluid condition.