• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.303-310
• /
• 2002

In this paper, we propose a proxy caching scheme that stores a portion of a continuous media object or an entire object on the Internet. The proxy stores the initial fraction of a continuous media object and determines the optimal size of the initial fraction of the continuous media object to be cached based on the object popularity. Under the proposed scheme, the initial latency of most clients and the data transferred from a remote server can be reduced and limited cache storage space can be utilized efficiently. Considering the characteristics of continuous media, we also propose the novel popularity for the continuous media objects based on the amount of the data of each object played by the clients. Finally, we have performed trace-driven simulations to evaluate our caching scheme and the popularity for the continuous media objects. Through these simulations, we have verified that our caching scheme, PPC outperforms other well-known caching schemes in terms of BHR, DSR and replacement and that popularity for the continuous media objects based on the amount of the playback data can enhance the performance of caching scheme.

• Journal of Environmental Science International
• /
• v.13 no.7
• /
• pp.645-653
• /
• 2004

Indoor air quality is affected by source strength of pollutants, ventilation rate, decay rate, outdoor level, and so on. Although technologies measuring these factors exist directly, direct measurements of all factors are not always practical in most field studies. The purpose of this study was to develop an alternative method to estimate these factors by application of multiple measurements. For the total duration of 30 days, daily indoor and outdoor $NO_2$ concentrations were measured in 30 houses in Brisbane, Australia, and for 21 days in 40 houses in Seoul, Korea, respectively. Using a box model by mass balance and linear regression analysis, penetration factor (ventilation divided by sum of air exchange rate and deposition constant) and source strength factor (emission rate divided by sum of air exchange rate and deposition constant) were calculated, Sub-sequently, the ventilation and source strength were estimated. In Brisbane, the penetration factors were $0.59\pm0.14$ and they were unaffected by the presence of a gas range. During sampling period, geometric mean of natural ventilation was estimated to be $l.l0\pm1.5l$ ACH, assuming a residential $NO_2$ decay rate of 0.8 hr^{-1}$ in Brisbane. In Seoul, natural ventilation was $1.15\pm1.73$ ACH with residential $NO_2$ decay rate of 0.94 hr^{-1}$ Source strength of $NO_2$ in the houses with gas range $(12.7\pm9.8$ ppb/hr) were significantly higher than those in houses with an electric range $(2.8\pm2,6$ ppb/hr) in Brisbane. In Seoul, source strength in the houses with gas range were $l6.8\pm8.2$ ppb/hr. Conclusively, indoor air quality using box model by mass balance was effectively characterized.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.141-150
• /
• 1990

Numerical experiments of sballow water equations are performed under various boundary conditions by finite element method to simulate the circulation in estuaries and coastal areas. Galerkin method is employed to discretize spatial domain, and for time integration, finite difference method (Crank-Nicolson scheme) is used. This method is tested in five problems, in which first four cases have analytic solutions. The computed values are well in agreement with the analytic solutions in four experiments and the result of the last 2-dimensional ease is resonable. Implicit and two step Lax-Wendroff schemes in time domain are compared, and the results when using four node bilinear and triangular elements are presented. Consequently it takes very long time for complex problems requiring many elements to integrate all the time steps using the implicit schemes. And the explicit scheme requires careful consideration in selecting the time step and the grid size to obtain the desired accuracy.

• Korean Journal of Pharmacognosy
• /
• v.38 no.4
• /
• pp.299-304
• /
• 2007

The residual sulfur dioxide in the five herbal medicines dried with burning bituminous coal for 9 hours showed from 339 (Glycyrrhizae Radix) to 1,138 mg/kg (Zingiberis Rhizoma) measured right after drying. The residual sulfur dioxide, from 70.1 to 95.5%, was remained in the above five matrices even after 30 days passed. The marker components concentration in above five herbal medicines like glycyrrhizic acid, betaine et al., were almost same after drying in oven and with burning bituminous coal.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.2077-2083
• /
• 2000

For the application of wet air oxidation(WAO) process reactive dyes, remazol blacks has been selected as the subject for this study. The rate of decomposition relating to the reaction temperature and catalyst has been summarized during the catalytic wet air oxidation reaction. When 1.5 gram per liter of platinum is added titanium-dioxide and the partial pressure is adjusted to 6 atmosphere at the reaction temperature exceeding $200^{\circ}C$, more than 95% of the remazol blacks dyes were decomposed. When the reaction temperature was raised to $200^{\circ}C$, $220^{\circ}C$ and $250^{\circ}C$, respectively, for 240 minutes after adding the catalyst, the remaining rate of ultraviolet absorbance had dropped significantly to 18%, 12%, and 4%. At the reaction temperature of $250^{\circ}C$, color removal efficiency was approximately 95% or more after 120 minutes from the beginning of the reaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.933-938
• /
• 2008

In the present study, carbon dioxide was converted to methane, using bio-hydrogen. Here, the bio-hydrogen was produced from organic waste. The anaerobic microorganism was cultured using only carbon dioxide and hydrogen for duration of 3 months. Therefore methane was not produced with acetogenotrophs. During methane production, carbon dioxide and hydrogen are taken in different ratios; among which 1 : 5 ratio has shown the highest methane yield. Carbon dioxide and hydrogen were introduced into the reactor at the rate of 8 mL/min and 40 mL/min, respectively. In this case, 92% of carbon dioxide was reduced and 2.2 m$^3$/m$^3$ day amount of methane was produced. Thus, the process has been successful in conversion of carbon dioxide into methane by purging it into methane fermentation reactor with bio-hydrogen using batch process.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.688-693
• /
• 2008

TiO$_2$ photocatalyst films deposited beads were prepared by circulating fluidized bed chemical vapor deposition(CFB-CVD) using TTIP(Titanium Tetra Iso-Propoxyde). Photocatalytic activities of Photocatalyst beads were evaluated by decomposition rate of formaldehyde in aqueous solution using a photo-reactor. From the result of photocatalytic degradation of formaldehyde, decomposition rate were shown gradually increased according to the increase of UV intensity, circulating fluid velocity and addition amount of H$_2$O$_2$. However the decomposition rate of formaldehyde were decreased according to the increase of initial concentration and pH value.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1341-1348
• /
• 2012

In this paper, an efficient scheme for correcting rotated objects in medical images using the Mojette transform is presented. The Mojette transform is a kind of discrete Radon transform, where the transform domain is represented by a set of projections. The Mojette transform currently studied in the image compression area is modified for detecting the rotation angle of objects in medical images. First, in order to find accurate rotation angle, the projection value in the Mojette transform is determined by using pixels on the projection line and in addition the linear interpolation of pixels adjacent to the line. Second, at each projection angle, only one projection is implemented for reducing the amount of the calculation in the process of the Mojette transform. Finally, the projection in the Mojette transform is carried out at the predetermined ROI(Region Of Interest) at which the objects are not cropped or added by rotating the image. The simulation results show that the proposed method has good performance for correcting the rotation angle in medical images.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.431-437
• /
• 2004

This paper propose a facial recognition method based on an ubiquitous computing that is one of next generation intelligence technology fields. The facial images are acquired by a mobile device so-called cellular phone camera. We consider a mobile security using facial feature extraction and recognition process. Facial recognition is performed by the PCA and fuzzy LDA algorithm. Applying the discrete wavelet based on multi-resolution analysis, we compress the image data for mobile system environment. Euclidean metric is applied to measure the similarity among acquired features and then obtain the recognition rate. Finally we use the mobile equipment to show the efficiency of method. From various experiments, we find that our proposed method shows better results, even though the resolution of mobile camera is lower than conventional camera.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.1
• /
• pp.56-63
• /
• 2009

Nowdays, Most of Internet Contents delivered as a compressed file. It gives many advantages like deduction of communication bandwidth and transmission time etc. In case of JPEG Compression, Quantization is the most important procedure which accomplish the compression. In general signal processing, Quantization is the process which converts continuous analog signal to discrete digital signal. As you known already, Quantization over JPEG compression is to reduce magnitude of pixel value in spatial domain or coefficient in frequency domain. A lot of Data Hiding algorithms also developed to applicable for those compressed files. In this paper, we are going to unveil the influence of quantization table which used in the process of JPEG compression. Even thought most of algorithm modify frequency coefficients with considering image quality, they are ignoring the influence of quantization factor corresponding with the modified frequency coefficient. If existing algorithm adapt this result, they can easily evaluate their performances.