• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.460-465
• /
• 2007

This paper deals with the Fine Digital Sun Sensor (FDSS) for Science & Technology Satellite 2(STSAT-2). The FDSS was firstly developed by using CMOS-Image sensor(CIS) in South Korea. This paper will describe the configuration of the FDSS, the design of the optical part, the analysis result of the optical characteristics of the sunlight, and the calibration result measured by solar simulator.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.507-514
• /
• 2015

The Internet of Things era is approaching where all the things are equipped with smart sensors and communicate through internet. The three core technologies of the Internet of Things are 'detection technology' to get information from things and the environment, 'wired and wireless communications and network infrastructure skills' that support to connect things to the internet, and 'service interface technology' that processes the information appropriate to various services. Smart sensor application can expand to smartphone, smart cars, smart home systems, wearable electronic devices, telemedicine systems, and environmental monitoring systems, etc. In particular, technologies that mimic the five human senses. This study reviews the biological principles of the human senses and the principles of operation, research & development status, technology trends and market analysis of the sensors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.99-102
• /
• 2012

An image scaler is a IP used in a image processing block of display devices to adjust image size. Proposed image scaler adopts line memories instead of a conventional method using a frame memory. This method reduced hardware resources and enhanced data precision by using shift operations that number is multiplied by $2^m$ and divided again at final stage for scaling. Also image scaler increased efficiency of IP by using serial divider to calculate parameters by itself. Parameters used in image scaling is automatically produced by it. Suggested methods are designed by Verilog HDL and implemented with Xilinx Vertex-4 XC4LX80 and ASIC using TSMC 0.18um process.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.111-120
• /
• 2016

Education equipment for field programmable gate array (FPGA) design of sensor-based IOT (Internet Of Thing) system is introduced. Because sensors have different interfaces, several types of interface controller on FPGA need. Using this equipment, several types of interface controller, which can control ADC (analog-to-digital converter) for analog sensor outputs and $I^2C$ (Inter-Integrated Circuit), SPI (Serial Peripheral Interface Bus), and GPIO (General-Purpose Input/Output) for digital sensor outputs, can be designed on FPGA. Image processing hardware using image sensors and display controller for real and image-processed images or videos can be design on FPGA chip. This equipment can design a SOC (System On Chip) consisting of a hard process core on Linux OS and a FPGA block for IOT system which can communicate with wire and wireless networks. Using the education equipment, an example of hardware design using image sensor and accelerometer is described, and an example of syllabus for "Digital system design using FPGA" course is introduced. Using the education equipment, students can develop the ability to design some hardware, and to train the ability for the creative capstone design through conceptual, partial-level, and detail designs.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.103-110
• /
• 1998

Pyroelectric infrared detectors based on La-modified $PbTiO_{3}$ (PLT) thin films have been fabricated by RF magnetron sputtering and rnicrornachining technology. The detectors form $Pb_{l-x}La_{x}Ti_{1-x/4}O_{3}$ (x=0.05) thin film ferroelectric capacitors epitaxially grown by RF magnetron sputtering on Pt/MgO (100) substrate. The sputtered PLT thin film exhibits highly c-axis oriented crystal structure that no poling treatment for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency. Polymide is coated on top of the sensing elements to support the fragile structure and the backside of the MgO substrate is selectively etched to reduce the heat loss. The sensing element exhibited a very high detectivity D* of $8.5{\times}10^{8}cm{\cdot}\sqrt{Hz}/W$ at room temperature and it is about 100 times higher than the case of micromachining technology is not used. A sensing system that detects the position as well as the existence of a human body is realized using the array sensor.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.1-4
• /
• 1991

근래 금성중앙연구소에서 수행하소 있는 광관련 산업기술 개발 현황의 소재를 통해 한국기업의 기술수준을 짐작할수 있을 것이다. 본 연구소의 광관련 기술 개발은 화합물 반도체를 이용한 광소자, 박막기술을 이용한 액정 및 이미지 센서, 광자기 디스크 그리고 호로그래피 관련분야로 구별될수 있고, 이에 해당하는 과제의 성과를 소개하고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.221-222
• /
• 2007

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.57-60
• /
• 2009

We consider introducing an optical thin film to the light guiding wall of a pixel in order to enhance the light guiding efficiency of a CMOS image sensor. Simulating the reflectance as a function of the incidence angle using the Essential Macleod program, we find that the range of total internal reflection is greatly increased for several materials. Particularly when air is chosen as the thin film material, the critical angle of total internal reflection could be shifted to about 50 degrees.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1581-1588
• /
• 2010

Most digital cameras use a single image sensor with Color Filter Array(CFA) for the advantage of costs and speed. The various color interpolation(demosaicing) algorithms are researched to reconstruct a full representation of the image. In this paper, we proposed a method of demosaicing about using weighted directional filter for vertical, horizontal, and diagonal direction edge. The method considered the efficiency of hardware resources for hardware implementation. The performance of proposed method was confirmed by comparing the conventional method in experiments using 24 Kodak test images. The proposed method was designed by Verilog HDL and was verified by using Virtex4 FPGA boards and CMOS Image Sensor.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.99-103
• /
• 2003

This paper presents lens optimization of the resolution and the distortion for a four-element lens design. In order to have compact optical system, we used the tele-photo type lens composed of a positive and a negative power elements instead of retro-focus lens. The specifications of optical lens design are the focal length of 7.2 mm, the F/number of 2.8 and the field angle of $54.7^{\circ}C$. The MTF values are higher than 0.5 in the spatial frequency range up to 110 lp/mm for all of the designed object heights. Also, it is expected to fulfill all the requirements of a digital still camera lens and especially suited for building low-cost, compact digital cameras because of the low-profile property of the lens design.