• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.1044-1047
• /
• 1998

Non-destructive x-ray inspection system needs image intensifier to obtain the x-ray image. Captured image from image intensifier is distorted because the input plate of image intensifier has a spherical surface. In the research, in order to compensate this image distortion, we created the model of image intensifier and show mathematically that the image distortion was compensated. To show the performance of the proposed method, experiment was performed in real x-ray inspection system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.49-56
• /
• 2002

Many users of 3D virtual city are Utilize a texture image for the cognition of real object. In this study, building's facet images were achieved by a digital camera and adjusted its distortion by use of the 2D projective transformation method. After then, Images are mapped to a 3D building model by means of the OpenGL. Application program is able to offer an automation solution to construction process of the 3D virtual city.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.597-602
• /
• 2013

In this paper, the lens module of mega pixel type was designed for barrel distortion calibration due to the barrel distortion of ultra wide angle. And the performance of this camera module was improved with the images from wide dynamic range 2 megapixel CMOS image sensor.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.236-239
• /
• 2003

본 논문에서는 많은 잡음으로 인해 손상된 지문으로부터 향상된 특이점 추출에 관한 방법을 제안한다. 최근 들어 주민등록증 뒷면의 지문 이미지와 본인의 생체 지문을 비교하여 본인임을 판단하는 시스템에 관한 연구가 활발하게 진행되어지고 있다. 그런데 생체지문 인식 장치를 통해 입력받은 지문 이미지는 왜곡과 잡음이 없는데 반해 주민등륵증상의 지문이미지는 입력 당시 잉크를 통해 회전날인 방식으로 입력받아 잡음과 왜곡이 심하여 두 이미지간의 인증율이 좋지 않다. 이에 주민등록증의 지문 이미지에 대한 잡음과 왜곡보정 필터링과 오류 특이점 제거 등을 통하여 향상된 지문인식 시스템을 구성할 수 있는 방법을 제안한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.391-394
• /
• 2023

일반적으로 화재 감지 시스템은 정확하고 빠르게 화재를 감지하는 것은 어려운 문제 중 하나이다. 본 논문에서는 U-net을 활용하여 기존의 화재(불) 영역 추출 기법으로 Segmentation으로 보다 정밀하게 탐지하는 기법을 제안한다. 이 기법은 화재 이미지에서 연기제거 및 색상보정을 통해 이미지를 전처리하여 화염 영역을 추출한 뒤 U-Net으로 학습시켜 이미지를 입력하면 불 영역의 Segmentation을 추출하도록 한다.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.209-212
• /
• 2007

In the NUC of KOMPSAT-2, The NUC table for each pixel are divided as HF NUC(high frequency NUC) and LF NUC (low frequency NUC) to apply to few restricted facts in the operating system of KOMPSAT-2. This work presents the algorithm and process of NUC table generation and shows the imagery to compare with and without calibration.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.21-28
• /
• 2006

In a face detection system based on template matching, histogram equalization or log transform is applied to an input image for the intensity normalization and the image improvement. It is known that they are noneffective in improving an image with intensity distortion by illumination variation. In this paper, we propose an efficient image improvement method using a simple regression analysis combined with a bilateral symmetry average for images with intensity distortion by illumination variation. Experimental results show that our method delivers the detection performance better than previous methods and also remarkably reduces the number of face candidates.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.131-137
• /
• 2013

The barrel distortion makes serious problems in a wide-angle camera employing a lens of a short focal length. This paper presents a low-complexity hardware architecture for a real-time barrel distortion corrector and its implementation. In the proposed barrel distortion corrector, the conventional algorithm is modified so that the correction is performed incrementally, which results in the reduction of the number of required hardware modules for the distortion correction. The proposed barrel distortion corrector has a pipelined architecture so as to achieve a high-throughput correction. The correction rate is 74.86 frames per sec at the operating frequency of 314MHz in a $0.11{\mu}m$ CMOS process, where the frame size is $2048{\times}2048$. The proposed barrel distortion corrector is implemented with 14.3K logic gates.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.124-127
• /
• 2019

본 논문에서는 단일 이미지의 관심 영역에 기반한 저심도 후처리 방법을 제안한다. 저심도 이미지란 사진에서 초점이 선명하게 포착되는 깊이의 범위가 좁은 이미지를 말한다. 기존의 광학적 특성을 이용한 저심도 이미지를 만드는 과정은 물리적인 구조 설계비용 문제가 존재한다. 또한, 이미지의 후처리 보정을 통한 방법은 이미지상의 사물 깊이 정보를 알기 어렵기 때문에 이미지의 심도를 후처리하기 어려웠다. 이에 따라 본 논문에서는 슈퍼 픽셀 군집화 방법을 통해 관심 영역을 찾고, 이에 기반하여 관심 영역이 부각될 수 있는 저심도 후처리 방법을 제안한다. 제안하는 후처리 방법은 슈퍼픽셀 군집화 방법을 통해 관심영역을 설정하여 배경 영역을 분리하고 블러 과정을 수행한다. 관심 영역을 제외한 부분을 확장 한 뒤 배경 블러를 거치기 때문에 후광효과가 현저히 줄어든 저심도 효과가 적용된 이미지를 얻을 수 있었고 MSRA-1000 데이터 셋 이미지에서 우수한 주관적 화질 결과를 보였다.