• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.448-457
• /
• 2004

As computer Programs for cephalometric analysis were developed in diagnosis & treatment planning, digital imaging of film-based cephalograms came to be needed. When a digital camera is used, a problem encountered the image distortion produced according to the focal length, which causes errors in indentifying landmarks. In addition, changes in the image size and compression ratio will inevitably produce a low quality image, causing errors in identifying landmarks. Hence. we have found the focal length producing the least image distortion when digital imaging the film-based cephalograms and the minimal digital camera setting which helps to identify the correct landmarks using the COOLPIX4500 digital camera (Nikon, Japan). The results were as follows The image distortion was minimized at a focal length of 16.4mm (79.4mm when converted into a 35mm film camera) when digital imaging the film-based cephalograms. When wide imaging, with a focal length of under IS.4mm, barrel distortion was found and when tole imaging. with a focal length of over 15.4mm pincushion distortion was found. The minimal digital camera setting was $2272{\times}1704$ pixel at normal (1/8) compression from which we can identify the correct landmarks at the same level as tracing the film-based cephalograms manually. As a result. when digital imaging the film-based cephalograms, using a COOLPIX4500 digital camera (Nikon, Japan), the focal length should be 16.4mm the pixel image size over $2272{\times}1704$, and the compression ratio over normal (1/8).

• The Journal of the Korea Contents Association
• /
• v.3 no.1
• /
• pp.14-20
• /
• 2003

In this paper efficient skew estimation and correction approaches are proposed. To detect the skew of text images, Hough transform using the perpendicular angle view property and shape moments are peformed. The resultant primary text skew angle is used to align the original text. The performance evaluations of the proposed methods with respect to running time are shown.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.555-562
• /
• 2007

In order to display Bayer input stream received from CMOS image sensor to the display device, image signal processing must be performed. That is, the hardware performing the image signal processing for Bayer data is called ISP(Image Signal Processor). We can see real image through ISP processing. ISP executes functionalities for gamma correction, interpolation, color space conversion, image effect, image scale, AWB, AE and AF. In this paper, we obtained the optimum algorithm through software verification of ISP module for CMOS camera image sensor and described using VHDL and verified in ModelSim6.0a simulator. Also we downloaded into Xilinx XCV-1000e for the designed ISP module and completed the board level verification using PCI interface.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1157-1163
• /
• 2000

In this paper, we present a novel and practical stereo vision system that uses only one camera and four mirrors placed in front of the camera. The equivalent of a stereo pair of images are formed as left and right halves of a single CCD image by using four mirrors placed in front of the ten of a CCD camera. An object arbitrary point in 3D space is transformed into two virtual points by the four mirrors. As in the conventional stereo system, the displacement between the two conjugate image points of the two virtual points is directly related to the depth of the object point. This system has the following advantages over traditional two camera stereo that identical system parameters, easy calibration and easy acquisition of stereo data.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.102-113
• /
• 2014

This paper suggests a novel hardware architecture of a real-time rectification which is to remove vertical parallax of an image occurred in the pre-processing stage of stereo matching. As an off-line step, Matlab Toolbox which was designed by J.Y Bouguet, was used to calculate calibration parameter of the image. Then, based on the Heikkila and Silven's algorithm, rectification hardware was designed. At this point, to enhance the precision of the rectified image, floating-point unit was generated by using Xilinx Core Generator. And, we confirmed that proposed hardware design had higher precision compared to other designs while having the ability to do rectification in real-time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.265-272
• /
• 2019

In this paper, a vision-based deep learning algorithm and image processing method are proposed to detect bolt-loosening in steel connections. To achieve this objective, the following approaches are implemented. First, a bolt-loosening detection method that includes regional convolutional neural network(RCNN)-based deep learning algorithm and Hough line transform(HLT)-based image processing algorithm are designed. The RCNN-based deep learning algorithm is developed to identify and crop bolts in a connection image. The HLT-based image processing algorithm is designed to estimate the bolt angles from the cropped bolt images. Then, the proposed vision-based method is evaluated for verifying bolt-loosening detection in a lab-scale girder connection. The accuracy of the RCNN-based bolt detector and HLT-based bolt angle estimator are examined with respect to various perspective distortions.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.2
• /
• pp.109-121
• /
• 2016

To verify the accuracy of the image guided radiotherapy using ExacTrac 6D couch, the error values in six directions are randomly assigned and corrected and then the corrected values were compared with CBCT image to check the accurateness of ExacTrac. The therapy coordination values in the Rando head Phantom were moved in the directions of X, Y and Z as the translation group and they were moved in the directions of pitch, roll and yaw as the rotation group. The corrected values were moved in 6 directions with the combined and mutual reactions. The Z corrected value ranges from 1mm to 23mm. In the analysis of errors between CBCT image of the phantom which is corrected with therapy coordinate and 3D/3D matching error value, the rotation group showed higher error value than the translation group. In the distribution of dose for the error value of the therapy coordinate corrected with CBCT, the restricted value of dosage for the normal organs in two groups meet the prescription dose. In terms of PHI and PCI values which are the dose homogeneity of the cancerous tissue, the rotation group showed a little higher in the low dose distribution range. This study is designed to verify the accuracy of ExacTrac 6D couch using CBCT. It showed that in terms of the error value in the simple movement, it showed the comparatively accurate correction capability but in the movement when the angle is put in the couch, it showed the inaccurate correction values. So, if the body of the patient is likely to have a lot of changes in the direction of rotation or there is a lot of errors in the pitch, roll and yaw in ExacTrac correction, it is better to conduct the CBCT guided image to correct the therapy coordinate in order to minimize any side effects.

• Venture DIGEST
• /
• s.119
• /
• pp.12-15
• /
• 2008

1980년 영등포구에서 분리된 구로구는 종전 제조업 위주의 구로공단의 칙칙한 이미지로 각인되었다. 하지만 이제 구로는 첨단 벤처단지로 거듭나면서, 디지털 단지를 중심으로 우리나라의 첨단산업을 이끄는 메카로 부상하고 있다. 4대 권역별 균형개발이란 청사진이 완료되면서, 가리봉동 일대 균형발전 촉진지구는 디지털 단지의 배후 기능도시로, 신도림동 일대는 상업복합화를 통해 상권 중심지로, 개봉역 일대는 영등포 교정시설 이전과 주거.문화가 어우러진 복합단지 건설로 생활중심권으로, 서남권 시계지역(오류동, 수궁동 지역)은 수목원과 도시자연공원이 어우러진 전원형 신도시로 변신중이다. 이같은 변화의 주체이며 조력자인 구로구청을 찾아 구로구 소재 중소.벤처기업의 포괄적 마케팅 지원 사업과 해외시장개척단 운영사업, 디지털산업 지원시책을 듣는다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.134-135
• /
• 2003

인체안의 단색수차는 시력의 한계를 규정하고 또한 안광학 기기의 설계에 있어서 중요한 요소이기 때문에 오래 전부터 많은 관심을 갖게 되었다. 또한 단색수차를 정밀하게 측정함으로써 가장 이상적인 시력 교정 방법을 찾을 수 있다. 본 연구에서는 먼저 그림 1과 같은 Shack-Hartmann (SH) 파면분석기를 구성하였다. 이 파면분석기는 대물렌즈, 결상렌즈, 미소렌즈배열(microlens array, MLA), 그리고 이미지 센서(CCD)로 구성되어 있다. (중략)

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.1
• /
• pp.17-25
• /
• 2005

In modem society, individuality and diversity are emphasized and visual sensation is considered to be very important because of high degree industrialization and development of mass media. And also, the Total Fashion Age opened. In the past, spectacles was a mere means of correcting or protecting sight. It's design was very simple in form and skill. But in 21C, eyewear design is viewed as a vehicle to create fashion and keeps changing to be in line with the contemporary culture and fashion trend beyond the old functions. The purpose of this study was to investigate the conditions of eyewear design in the 21st century by looking into the history of eyewear and analyzing the trend of eyewear design and the color image with fashion, hair, and make-up.