• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.273-278
• /
• 2007

검사점 및 복구 도구(Checkpointing & Recovery Facility)를 이용하여 임베디드 시스템에서 결함 허용(Fault Tolerance) 기법을 적용할 경우 쓰기 작업의 오버헤드로 인해 실용성이 크게 떨어지게 된다. 실시간 운영체제와 함께 어떠한 한계 상황에서 결함 허용 및 복구 도구가 오히려 시스템의 성능을 저하시키는 요인으로 작용하게 되면 이는 결국 쓸모없는 도구가 되어 사용되지 않을 것이다. 따라서 프로세스의 복구를 위해 저장하는 프로세스 이미지의 기록에 소요되는 시간을 크게 낮추어야만 비로소 검사점 도구가 그 진가를 발휘하게 될 수 있다. 본 논문에서는 NVSRAM(Non Volatile SRAM)을 검사점 및 복구 도구의 저장 장치로 활용함으로써 기존의 검사점 도구에서 성능을 저하시키는 주원인이었던 검사점 기록의 오버헤드를 개선하기 위한 연구를 수행하였다. 검사점 기록 시간을 줄이기 위한 방법으로 주 메모리에 저장된 프로세스의 복구와 관련된 데이터를 SRAM 특성을 갖는 비휘발성 저장 장치인 NVSRAM에 저장하여 디스크 접근에 소요되는 시간을 최소화시킴으로써 임베디드 시스템에서 실용적으로 사용 가능한 검사점 도구를 구현하였고, 이러한 연구의 결과를 검증하기 위해 기존 시스템에서 저장 장치로 사용되던 플래시 메모리, 주 메모리, 원격 메모리를 사용하는 경우의 성능과 NVSRAM을 활용할 때의 성능을 비교해 보았다. 본 연구에서 제안하는 결함 허용 도구는 실제 시스템에 적용하여 효과적인 성능을 발휘할 수 있을 것이며, 차세대 메모리를 이용한 결함 허용 도구의 연구에 기여를 할 수 있을 것으로 기대된다.ate첨가배지(添加培地)에서 가장 저조(低調)하였다. vitamin중(中)에서는 niacin과 thiamine첨가배지(添加培地)에서 근소(僅少)한 증가(增加)를 나타내었다.소시켜 항이뇨 및 Na 배설 감소를 초래하는 작용과, 둘째는 신경 경로를 통하지 않고, 아마도 humoral factor를 통하여 신세뇨관에서 Na 재흡수를 억제하는 작용이 복합적으로 나타내는 것을 알 수 있었다.으로 초래되는 복합적인 기전으로 추정되었다., 소형과와 기형과는 S-3에서 많이 나왔다. 이상 연구결과에서 입도분포가 1.2-5mm인 것이 바람직한 것으로 나타났다.omopolysaccharides로 확인되었다. EPS 생성량이 가장 좋은 Leu. kimchii GJ2의 평균 분자량은 360,606 Da이었으며, 나머지 두 균주에 대해서는 생성 EPS 형태와 점도의 차이로 미루어 보아 생성 EPS의 분자구조와 분자량이 서로 다른 것으로 판단하였다.TEX>개로 통계학적으로 유의한 차이가 없었다. Heat shock protein-70 (HSP70)과 neuronal nitric oxide synthase (nNOS)에 대한 면역조직화학검사에서 실험군 Cs2군의 신경세포가 대조군 12군에 비해 HSP70과 nNOS의 과발현을 보였으며, 이는 통계학적으로 유의한 차이를 보였다(p<0.05). nNOS와 HSP70의 발현은 강한 연관성을 보였고(상관계수 0.91, p=0.000), nNOS를 발현하는 세포가 동시에 HSP70도 발현함을 확인할 수 있었다. 결론: 우리는 cyclosporin A가 토끼의 25분간의 척수허혈에 대해 척수보호 효과가 있었으며 이는 HSP70의

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.155-160
• /
• 2014

There are many image processing based algorithms and applications that fail when illumination change occurs. Therefore, the illumination change has to be detected then the illumination change occurred images need to be enhanced in order to keep the appropriate algorithm processing in a reality. In this paper, a new method for detecting illumination changes efficiently in a real time by using local region information and fuzzy logic is introduced. The effective way for detecting illumination changes in lighting area and the edge of the area was selected to analyze the mean and variance of the histogram of each area and to reflect the changing trends on previous frame's mean and variance for each area of the histogram. The ways are used as an input. The changes of mean and variance make different patterns w hen illumination change occurs. Fuzzy rules were defined based on the patterns of the input for detecting illumination changes. Proposed method was tested with different dataset through the evaluation metrics; in particular, the specificity, recall and precision showed high rates. An automatic parameter selection method was proposed for contrast limited adaptive histogram equalization method by using entropy of image through adaptive neural fuzzy inference system. The results showed that the contrast of images could be enhanced. The proposed algorithm is robust to detect global illumination change, and it is also computationally efficient in real applications.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.177-195
• /
• 2020

The social consciousness on fake reviews has triggered researchers to suggest ways to cope with them by analyzing contents of fake reviews or finding ways to discover them by means of structural characteristics of them. This research tried to collect data from blog posts in Naver and detect habitual patterns users use unconsciously by variables extracted from blogs and blog posts by a machine learning model and wanted to use the technique in predicting fake reviews. Data analysis showed that there was a very high relationship between the number of all the posts registered in the blog of the writer of the related writing and the date when it was registered. And, it was found that, as model to detect advertising reviews, Random Forest is the most suitable. If a review is predicted to be an advertising one by the model suggested in this research, it is very likely that it is fake review, and that it violates the guidelines on investigation into markings and advertising regarding recommendation and guarantee in the Law of Marking and Advertising. The fact that, instead of using analysis of morphemes in contents of writings, this research adopts behavior analysis of the writer, and, based on such an approach, collects characteristic data of blogs and blog posts not by manual works, but by automated system, and discerns whether a certain writing is advertising or not is expected to have positive effects on improving efficiency and effectiveness in detecting fake reviews.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.839-846
• /
• 2006

Context-aware adaptive service for overcoming the limitations of wireless devices and maintaining adequate service levels in changing environments is becoming an important issue. However, most existing studies concentrate on an adaptation module on the client, proxy, or server. These existing studies thus suffer from the problem of having the workload concentrated on a single system when the number of users increases md, and as a result, increases the response time to a user's request. Therefore, in this paper the adaptation module is dispersed and arranged over the client, proxy, and server. The module monitors the contort of the system and creates a proposition as to the dispersed adaptation system in which the most adequate system for conducting operations. Through this method faster adaptation work will be made possible even when the numbers of users increase, and more stable system operation is made possible as the workload is divided. In order to evaluate the proposed system, a prototype is constructed and dispersed operations are tested using multimedia based learning content, simulating server overload and compared the response times and system stability with the existing server based adaptation method. The effectiveness of the system is confirmed through this results.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.1-12
• /
• 2003

Recently, there have been many indexing schemes for multimedia data such as image, video data. But recent database applications, for example data mining and multimedia database, are required to support multi-user environment. In order for indexing schemes to be useful in multi-user environment, a concurrency control algorithm is required to handle it. So we propose a concurrency control algorithm that can be applied to CBF (cell-based filtering method), which uses the signature of the cell for alleviating the dimensional curse problem. In addition, we extend the SHORE storage system of Wisconsin university in order to handle high-dimensional data. This extended SHORE storage system provides conventional storage manager functions, guarantees the integrity of high-dimensional data and is flexible to the large scale of feature vectors for preventing the usage of large main memory. Finally, we implement the web-based image retrieval system by using the extended SHORE storage system. The key feature of this system is platform-independent access to the high-dimensional data as well as functionality of efficient content-based queries. Lastly. We evaluate an average response time of point query, range query and k-nearest query in terms of the number of threads.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.11-23
• /
• 2015

Construction Management(CM) and Building Information Management(BIM) have a lot in common that they need to establish a cooperation system among different disciplines and promote smooth communication among project stakeholders throughout the project life-cycle. BIM can be an effective information management tool for CM's business and improve their service value. However, BIM uses by Construction Managers(CMr) are very limited. The objective of this study is to analyze the intention of CMrs to adopt BIM and establish effective BIM use strategy in the CMr's point of view. This study utilizes Technology Acceptance Model(TAM) as a research method, and the results show that 1) CMrs think it is more important whether BIM is required to be adopted in their business process at the social or industry level than that BIM can improve their personal competence, recognition, and impressions through their voluntary BIM adoption; 2) that CMrs think it is important to figure out business processes where BIM can be smoothly incorporated; and 3) that CMrs hesitate the use and trial of BIM in their realworld business although they agree that BIM needs to be eventually adopted in their business in the future. Based on these results, directions for establish a strategy for BIM adoption were proposed at the CMr's point of view

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.7
• /
• pp.305-317
• /
• 2008

As a mobile computing environment is rapidly changing, increasing user demand for multimedia-over-wireless capabilities on embedded processors places constraints on performance, power, and sire. In this regard, this paper proposes color media instructions (CMI) for single instruction, multiple data (SIMD) parallel processors to meet the computational requirements and cost goals. While existing multimedia extensions store and process 48-bit pixels in a 32-bit register, CMI, which considers that color components are perceptually less significant, supports parallel operations on two-packed compressed 16-bit YCbCr (6 bit Y and 5 bits Cb, Cr) data in a 32-bit datapath processor. This provides greater concurrency and efficiency for YCbCr data processing. Moreover, the ability to reduce data format size reduces system cost. The reduction in data bandwidth also simplifies system design. Experimental results on a representative SIMD parallel processor architecture show that CMI achieves an average speedup of 6.3x over the baseline SIMD parallel processor performance. This is in contrast to MMX (a representative Intel's multimedia extensions), which achieves an average speedup of only 3.7x over the same baseline SIMD architecture. CMI also outperforms MMX in both area efficiency (a 52% increase versus a 13% increase) and energy efficiency (a 50% increase versus an 11% increase). CMI improves the performance and efficiency with a mere 3% increase in the system area and a 5% increase in the system power, while MMX requires a 14% increase in the system area and a 16% increase in the system power.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.94-100
• /
• 2008

Recently, global warming for climate system is a crucial issue over the world and it brings about severe climate change, abnormal temperature, a downpour, a drought, and so on. Especially, a drought over the earth surface accelerates desertification which has been advanced over the several years mainly originated from a climatic change. The objective of this study is to detect variation of vegetation water condition around China and Mongolia desert by using satellite data having advantage in observing surface biological system. In this study, we use SPOT/VEGETATION satellite image to calculate NDWI (Normalized Difference Water Index) around study area desert for monitoring of status of vegetation characteristics. The vegetation water status index from remotely sensing data is related to desertification since dry vegetation is apt to desertify. We can infer vegetation water status using NDWI acquired by NIR (Near infrared) and SWIR (Short wave infrared) bands from SPOT/VGT. The consequence is that NDWI decreased around desert from 1999 to 2006. The areas that NDWI was decreased are located in the northeast of Mongolian Gobi desert and the southeast of China Taklamakan desert.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.307-320
• /
• 2007

In this study, we attempted to provide a distinctive cognitive, emotional 'Auditory User Interface (AUI) Design Guideline' according to home appliance groups and their functions. It is an effort to apply a new design method to practical affairs to overcome the limit of GUI centered appliance design and reflect user multimodal properties by presenting a guideline possible to generate auditory signals intuitively associable with the operational functions. The reason why this study is required is because of frequent instances given rise to annoyance as not systematic application of AUI, but arbitrary mapping. This study tried to provide a useful guideline of AUI in home appliances by extracting the relations with cognitive, emotional properties of a certain device or function induced by several properties of auditory signal and showing the empirical data on the basic mechanism of such relations.

• Archives of design research
• /
• v.15 no.1
• /
• pp.59-67
• /
• 2002

In accordance with the fast changing circumstance, universities are now reaching, beyond the education place of simple delivery of knowledge and exchange of information, to a place of developing a specialty program related with the region and industry to achieve a competitive edge in education. Through these academic-industrial collaboration program, special knowledge and human resources in the university are utilized in the society and it may contribute to the development of industry and breed of career people based upon the real job site can be achieved. In addition, through the practical operation of such developed program, university may contribute to the enhancement of the competitiveness of the corporation to the activation and acceleration of the regional economy and finally to the enhancement of competitiveness of national industry in international level. This study tries to develop 3 technical instruction and support program related with the legion and industry which may conform to the ideals of university and its goal of education and can provide a platform for the education that is closely related with the regional industry and real job site iud may cope actively with the upcoming knowledge society and fast changing regional circumstances. This study will make research and analyze needs of design support from the industry in order to develop a academic-industrial cooperative design support program for the furniture industry which conforms to the regional characteristic and feature and develop and present contents of program in three area of development of furniture design technology, build-up of furniture design information system and establishment of order based education system. The proposed program is supposed to be operated practically and effectively and contribute to the development of new product, to enhancement of company image and finally to the maximization of corporate profit. Also this study is epected to be used as an important material for establishment of order-based education system which confirms to the job site needs that may be analysed from feedback of product results and for practical learning.