• Journal of architectural history
• /
• v.17 no.3
• /
• pp.23-43
• /
• 2008

Seoul has been watched at its symbolic image which is the capital of one nation. since then Joseon was established. So, most of study about Seoul placed too much emphasis on like next; urban organization, palace, government office and public establishment. On the other hand, it is lacking in study of the individual building, the residential district, the change of building-lot. This study is to make up a deficiency from study of Gaokdohyung(家屋圖形site and floor plan). Gaokdohyung(家屋圖形) is drawings of building lots & houses existed in Hanseongbu漢城府(modem Seoul). It is possessed in Jangseogak and all 24 sheets. It is merely 24sheets but has many urban information in that. Housing of number 116 expressed in Gaokdohyung are consist on the house of Sadaebu士天王(noble class) Joongin中人(middle class) Sangmin常民(commoner), Villa(Byeolseo別墅) and connecting stores etc. Houses in Gaokdohyung has characteristic that most building lot is very specious and owners are variety of social position. The study of Gaokdohyung will progress through analyzing diachronic change of individual building lot & house. In the event, results of this study will help to find out change of urban tissue & architecture. So, i intend to seek for entity of urban tissue and urban house in Joseon Period differ from now, and to study out those have been changed continuously forward now.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.819-827
• /
• 1997

In this paper, a new modeling of a fine actuator for an optical pick-up has been proposed and multiobjective optimization of the actuator has been performed. The fine actuator is constituted of the bobbin which is supported by wire suspension, the coils which wind around the bobbin, and the magnets which cause the magnetic flux. If current flows in the coils, magnetic force is so produced as to be balanced with spring force of wire, so the bobbin is pisitioned. In this model the transfer function from input voltage to output displacementof bobbin has been obtained so that we can describe this integrated system with electromagnetic and mechanical parts. Wire suspension is regarded as a continuous Euler beam, damper as distributed viscous damping, and bobbin as a rigid body which can move up- and down- ward motion only. According to the model, the high frequency dynamic characteristics of the fine actuator can be known and the effect of damping can be investigated while the conventional second order model cannot. In multiobjective optimization, two objective functions have been chosen to maximize the fundamental frequency and the sensitivity with respect to the input voltage of the actuator so that Pareto's optimal solutions have been obtained using .epsilon.-constraint method. These objective functions will satisfy the trends which will enhance the access speed and reduce the tracking error in the optical pick-up technology of next generation. In the result of optimization, we obtain the designs of the optical pick-up fine actuator which has high speed, high sensitivity and low resonant peak. Furthermore, we offer the relation between two object functions so that the designer can make easy choice.

• Laser Solutions
• /
• v.14 no.2
• /
• pp.8-12
• /
• 2011

As the aged population grows around the world, many medical instruments and devices have been developed recently. Among the devices, a drug delivery stent is a medical device which requires precision machining. Conventional drug delivery stent has problems of residual polymer and decoating because the drug is coated on the surface of stent with the polymer. If the drug is impregnated in micro hole array on the surface of the stent, the problem can be solved. Micro sized holes are generally fabricated by laser machining; however, the fabricated holes do not have an enough aspect ratio to contain the drug or a good surface finish to deliver it to blood vessel tissue. To overcome these problems, we propose a vibration-assisted machining mechanism with PZT (Piezoelectric Transducers) for the fabrication of micro sized holes. If the mechanism vibrates the eyepiece of the laser machining head, the laser spot on the workpiece will vibrate vertically because objective lens in the eyepiece shakes by the mechanism's vibration. According to the former researches, the vibrating frequency over 20kHz and amplitude over 500nm are preferable. The vibration mechanism has cylindrical guide, hollowed PZT and supports. In the cylinder, the eyepiece is mounted. The cylindrical guide has upper and low plates and side wall. The shape of plates and side wall are designed to have high resonating frequency and large amplitude of motion. The PZT also is selected to have high actuating force and high speed of motion. The support has symmetrical and rigid characteristics.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.151-158
• /
• 2006

In order to study the effects of supplementary $Safmannan^(R)$(Beta-glucan & MOS complex) and $World-Labs^(R)$ (multiple probiotics) on the performance, nutrient availability, small intestinal microflora and immune response in broiler chicks, one thousand hatched broilers ($Ross^(R)$ were assigned to 4 treatments: control(basal diet), $BMD^(R),\;Safmannan^(R)\;and\;World-Labs^(R)$. There were no significant differences in the performance and in serum IgG, ND titre. However parameters of leukocytes and erythrocytes were significantly different among treatments (p<0.05). Leukocytes and RBC of $World-Labs^(R)\;and\;Safmannan^(R)$ were mostly lower than $BMD^(R)$ and control whereby MCH and MCHC of $World-Labs^(R)\;and\;Safmannan^(R)$ were higher than other treatments. The cfu of intestinal microflora had no significant differences among treatments. The $BMD^(R)$ treatment was higher than others in amino acid and crude fat availability and $World-Labs^(R)$ was higher than others in crude fiber availability. It was concluded that supplements used in the present experiment did not significantly affect the production parameters. However, significant impact on blood parameters, especially on leucocytes, may need further investigation.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.834-839
• /
• 2012

Recently, mechanical components with miniaturized size, complex shape and fine surface are on demand from industries such as mobile electronics, medical devices and defense. The size of them is smaller than several millimeters, the shape has micro-holes, curve, or multi-step and the surface is mirror-like. This features are not able to be machined with the conventional machining, therefore electro-discharge machining (EDM), cutting, and laser machining have been applied. If the technologies are assisted by vibration, high aspect ratio and good surface are to be achieved. In this paper, prior and current researches of vibration-assisted machining are reviewed. Machining mechanisms with vibration-assisting are explained, their effects are shown, and vibrating apparatuses are discussed. Especially, comparison between with and without vibration assisting is presented. This review shows the vibration-assisted machining is effectively fabricate the components with small and complicated shape and fine surface finish.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.3
• /
• pp.76-81
• /
• 2011

Intrusion prevention systems (IPS) are important solution about solved problems for inside system security or outsider attacks. When introduce this system, first consideration item is secured rather than multiple function. Colored Petri Nets (CPNs) used that in order to secured verification for user authentication function of intrusion prevention system security model. CPNs is a graphical modeling language suitable for modeling distributed, concurrent, deterministic or non-deterministic systems with synchronous. Like these CPNs was expressed every possible state and occurrence graph. Secured of IPS security model was verified because expression every state using CPN tool and as a result of analyzing the occurrence graph was without a loop or interruption.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.307-314
• /
• 2009

Large area micro pattern replication has promising application potential in many areas. Rolling imprint process has been demonstrated as one of the most competitive processes for such micro pattern replication, because it has advantages in low cost, high throughput and high efficiency. In this paper, we developed a prototype of roll-to-flat(R2F) thermal imprint system for large area micro pattern replication process, which is one of the key processes in the fabrication of flexible displays. Experimental tests were conducted to evaluate the feasibility of system and the parameters' effect on the process, such as flat mold temperature, loading pressure and rolling speed. 100mm $\times$ 100mm stainless steel flat mold and commercially available polycarbonate sheets were used for the tests. The experimental results showed that the developed R2F system is suitable for fabrication of various micro devices with micro pattern over large area.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.459-464
• /
• 2013

The purpose of a micro-mixing device is to enhance the mixing by increasing the diffusion effect between different types of flows. There have been many attempts to actively or passively increase mixing. However, those studies were limited to lab-scale experiments because the production of devices requires a series of processes, time, cost, and the mixing quality itself. For this reason, this study attempted to develop a quick and simple process for micro-mixing device fabrication by using conventional machining and bonding processes and applying ultrasonic waves from the outside of the mixing device. The mixing quality was quantified by using the mixing index, and the results showed that the proposed system increases the mixing from ~33% to ~10% with respect to the flow rates.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.8
• /
• pp.811-818
• /
• 2004

The spreading of internet, combined with the computerization of industry and the life whole has created an incereased demand on the private life protection and information portection, but due to the lack of specialty manpower on the information protection industry field there are many difficulties. Therefore, in this paper a curriculum for an information protection specialty manpower training is proposed. The proposed curriculum indispensability 1,2 and classified with a selection 1,2 and classified with a selection 1,2. The information protection application field into 9 segments of domains, and to carry out the curriculum in a ring structure. The curriculum based on the information security field's 9 domains and related field practical business, and the course offered after graduation to deepen the specialty, need to be carried out by each domain in order to continuously carry out the information security deepening process.