• Journal of Society of Preventive Korean Medicine
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2020

Objectives : The purpose of this systematic review was to investigate the efficacy and safety of Sanjoin-tang (Suanzaoren decoction, SZRD) for insomnia in menopausal syndromes. Method : We searched the following databases: PubMed, Cochrane Library, EMBASE, China National Knowledge Infrastructure (CNKI), Chinese Science and Technique Journals Database (VIP), Wanfang, Research Information Service System (RISS), OASIS, Korean studies Information Service System (KISS), and National Digital Science Library (NDSL) databases. Randomized controlled trials (RCTs) or quasi-RCTs that used SZRD for women in menopause were included. The methodological quality of each RCT was assessed using the risk of bias tool. Results : In total, nine RCTs were finally included. The included RCTs had a high risk of bias across their domains. Three RCTs examined the effects of SZRD compared with western medicine (WM) in insomnia. Three RCTs showed favorable effects of SZRD with insomnia. Infrastructure also showed that SZRD resulted in better clinical WM (RR 1.19, 95% CI 1.07 to 1.32, P=0.001, I²=0%). Four RCTs showed favorable effects of Modified SZRD with insomnia. Infrastructure also showed that Modified SZRD resulted in better clinical WM (RR 1.13, 95% CI 1.04 to 1.23, P=0.004, I²=0%). Among the 4 RCTs, three RCTs showed an equivalent effect on the total Pittsburh Sleep Quality Index (PSQI). The meta-analysis also showed that Modified SZRD had a superior effect on the total of PSQI (total of PSQI : MD -2.55, 95% CI -3.72 to -1.37, P<0.0001, I²=85%). Only 2 trials reported adverse events and none reported severe adverse events. Conclusion : SZRD appears to be safe, but there is insufficient evidence to make a definitive conclusion because only a few studies reported adverse events. Due to the poor methodological quality of the included studies and the small number of trials included, the evidence cannot be reproduced and assessed. Well-designed RCTs with a larger sample size are needed in the future.

• Journal of Acupuncture Research
• /
• v.28 no.4
• /
• pp.57-64
• /
• 2011

Objectives : The aim of this study is to overview the current status of Cochrane systematic review of acupuncture. Methods : Published Cochrane systematic reviews and protocols for evaluating acupuncture and/or moxibustion were searched by the terms 'acupuncture' and 'moxibustion' in Issue 1, Cochrane Library, 2011. Only reviews or protocols that regarded acupuncture or moxibustion as primary methods of intervention in their reviews were included. Data regarding first author national affiliation, intervention and disease, as well as the number of reviews or protocols that included Korean, Chinese, or Japanese databases in search strategies were obtained. Results : We found 92 hits at screening, and 59 studies were eligible for this review. Included interventions were acupuncture (n=56), auricular acupuncture (n=2), and moxibustion (n=1) for various diseases and conditions. The number of publications of Cochrane systematic reviews or protocols increased gradually from 2002 to 2011. First authors' affiliations were located in China (n=32), Australia (n=8), UK (n=7), Canada (n=4), U.S. (n=4), Germany (n=2), Norway, (n=1) and Korea (n=1). 44, four and four Cochrane reviews adopted Chinese, Korean and Japanese databases, respectively. Conclusions : Search strategies in a substantial number of Cochrane reviews or protocols for acupuncture and moxibustion heavily relied on Chinese databases. Korean databases were underused in existing Cochrane reviews and protocols, and Korean authors were much less involved in the Cochrane systematic reviews or protocols than Chinese authors. Further studies need to be conducted in order to incorporate evidence of acupuncture reported in Korean databases into the Cochrane systematic reviews.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.5
• /
• pp.569-576
• /
• 2002

Background : Chlamydia pneumoniae is one of common causes in upper and lower respiratory infections. Isolating C. pneumoniae from clinical specimens is very difficult due to the characteristics of the organism. Recently, we succeeded in isolating C. pneumoniae from a Korean patient, who suffered from acute pharyngitis. This is the first isolate from a clinical specimen in Korea. Methods : We attained a nasopharyngeal swab from a 22-year-old female patient, and inoculated it on a monolayer of the Hep-2 cell line. After 8 passages, we found the inclusion bodies of C. pneumoniae by an immunofluorescence(IF) test. The species-specific monoclonal antibody IF staining and species-specific PCR were done to confirm the species of the isolate, and electron microscopy was used to characterize the morphology. Results : The isolated was confirmed to be C. pneumoniae by species-specific IF and PCR, and the strain was named LKK-1. The shape of the elementary body was round and with a narrow periplasmic space, as shown by electron microscopy, which is similar to the Japanese strain, but not the Western strain. Conclusion : We succeeded in isolating C. pneumoniae from a 22-year-old patient with acute pharyngitis, which is the first isolate in Korea. In the future, this Korean strain will be useful to the study of C. pneumoniae.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.49-53
• /
• 2008

Magnetic and crystallographic properties of patterned media fabricated by nanoimprint lithography and Co-Pt electroplating were studied. Thin films of Ru(20 nm)/Ta(5 nm)/$SiO_2$(100 nm) were deposited on Si(100) wafer and then 25 nm hole pattern was fabricated by nanoimprint lithography on substrate. The electroplated Co-Pt nano-dots have the diameter of 35 nm and the height of 27 nm. Magnetic dot patterns of Co-Pt alloy were created using electroplated Co-Pt alloy and then their properties were measured by MFM, SQUID, SEM, TEM and AFM. We observed single domain with perendicular anisotropy for each dot and achieved optimum coercivity of 2900 Oe. These results mean that patterned media fabricated by nanoimprint lithography and electroplating have good properties in view of extending superparamagnetic limit while satisfying the writability requirements with the present write heads.

• The Korean Journal of Nuclear Medicine
• /
• v.27 no.2
• /
• pp.175-182
• /
• 1993

We evaluated the usefulness of $^{99m}Tc$-HMPAO SPECT in 21 Patients with subarachnoid hemorrhage due to ruptured intracranial aneurysm and in 3 patients with unruptured intracranial aneurysm. SPECT study could detect the bilaterally hypoperfused cases in 10 patients (48%), but CT/MRI showed the bilateral abnormalities in only 3 patients (14%). The number of abnormal lesions were 56 in SPECT and 25 in CT/MRI. The lesions found in SPECT were well correlated with the neurological signs of the patients such as aphasia or hemiplegia. SPECT study during Matas test was helpful in evaluating the risk for carotid artery occlusion therapy. We thought that $^{99m}Tc$-HMPAO brain SPECT is helpful in evaluating the functional changes in patients with subarachnoid hemorrhage.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.167-173
• /
• 2011

The Effects of external resistance on electrical properties such as current density, power density and coulombic efficiency were investigated in two-chamber type MFCs using a ferricyanide as reducing agent. A stable electricity was produced when a constant time elapsed after innoculation of mixed cultures into the anode compartment; voltages from 0.13 to 0.16 V was measured at $50{\Omega}$ of external resistance. When the external resistance was increased, the current density decreased and the power density rapidly increased and then slowly decreased. Big variation of electrical properties was observed in high-current density region due to the concentration loss related with substrate consumption in repeated experiments changing the external resistance. The maximum power density ($175.8mW/m^2$) and coulombic efficiency (46.1%) were obtained at $100{\Omega}$ of the external resistance which is nearest with the internal resistance ($134{\Omega}$) of MFC system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.705-713
• /
• 2018

An automotive ball joint connects the suspension system to the steering system and helps to enable rotational and linear motion between the two elements for steering. This study examines a ball joint used in medium and large-sized pickup trucks. Ball joints consist of a stud, socket, bearing, and plug. The main structural performance metrics of ball joints are the pull-out strength and push-out strength. These structural parameters must meet certain criteria to avoid serious accidents. Test and simulation methods are used to investigate the design requirements, but tests are time-consuming and costly. In this study, we modeled ball joints in SolidWorks and performed a finite element analysis in Abaqus to predict structural performance. The analysis was used to obtain the structural performance required for the static analysis of a 2D axisymmetric model. The uncertainties in the manufacturing of the ball joint were assumed to be the manufacturing tolerances, and the dimensional design variables were identified through case studies. The manufacturing tolerances at each level were defined, and the results were compared with experimental results.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.496-500
• /
• 2009

Optically compensated bend liquid crystal display (OCB-LCD) has many application fields owing to its fast response time and wide viewing angle. However, in order to operate the OCB-LCD in bend state, this device needs quick transitions from the initial splay state to bend state. Unlike conventional approach using transient high voltage for the transition, the OCB-LCD with high surface tilt angle, which was achieved by polymerization of UV curable reactive mesogen monomer under certain voltage, was manufactured and the cell showed bend state initially. Electro-optic and electrical characteristics of the cell were analyzed. The cell shows a fast response time owing to high surface pretilt angle and very low residual DC less than 0.1 V although another polymer layer is formed above polymer alignment layers.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.1-11
• /
• 1998

This study was performed to analyze the occupational health nursing of support-project of health management skill for small-scale industries. The 2 subject centers were under the umbrella of Korean Industrial Health Association and data collection period was 2weeks from September 1 to 13. 1997 and time and motion study method was used. Data was handled by SPSS win 7.5 program. results were worked out number. percentage. F-value. (1) The weekly time spending of occupational health nurses was distributed into indoor service 46.9%, outdoor service 26.6%, movement 26.5%. The mean visiting times were 2-3 times per week. and spending time was about 1 hour per industry. (2) There are statistically significant difference among the distribution of time spending according to industrial works(F=23.08. p=.000). and the special education for occupational disease prevention takes the most mean time. (3) There were statistically significant difference among the spending time for the health coach of occupational health nurses(F=188.79. p=.000). and the activity time for workers (58.4%) was more than that of for monitors(41.6%). The frequency of health coachs were 155 times for monitors during two weeks. but health coach for worker was 87 times. As a results. the contents of health coach for workers was proved to take more time than that for monitors. Perhaps we think that monitors has limitation for health management. therefore we should be consider flexible management of visiting time and health coach guidelines for occupational health nurses. (4) There were statistically significant differences among the distribution of time spending according to health coach methods for industrial health nurses(F=66.31. p=.000). The most frequent method of all was guide transmission. 159 times(65.7%), and the mean spending time for instruction was 19.78 min. the longest time. Our suggestion for occupational health nursing of support-project of health management skill for small-scale industry is that the need of each industry is very complex because of various conditions. therefore need assessment for industries should be conducted professionally. And occupational health nurses should apply occupational health nursing process autonomously. and their activities be guaranted by the guideline

• The Korean Journal of Rehabilitation Nursing
• /
• v.4 no.2
• /
• pp.179-186
• /
• 2001

The purpose of this study is to develop a systematic and efficient curriculum for the rehabilitation nurse specialist program. This research was carried out as a group work of 15 experts in order to share various opinions about the curriculum, and also through literature review. Articles, curriculums of other Clinical Nurse Specialist Programs, medical laws guidelines, as well as Clinical Nurse Specialist Program from the Korean Nurses Association were reviewed, and the issue was discussed throughly via group meetings. The developed curriculum is as follows: 1. Educational philosophy lies in the fact that the rehabilitation nurses support the patients to maximize their potential and functional level, so that they could maintain healthy state and re-adapt to changed environment. Furthermore the rehabilitation nurses are disposed of arbitrary decision power under their own responsibility, thus they take charge of welfare and healthy environment of the local society through the patients(subjects) and local resources. 2. Educational goals are to train rehabilitation nurse specialist, who correspond to the social needs, so to say, those who have the knowledge and skills for nursing practice, education and research. 3. The curriculum consists of 37 credits, of which 24 credits are based on lectures and 13 credits based on clinical practice. General courses are 3 subjects (5 credits) ; nursing theory, nursing research, and laws/ethics. Mandatry courses are 8 subjects with 19 credits; advanced physical assessment, pharmacology, pathophysiology, issues in rehabilitation nursing, advanced rehabilitation nursing intervention I, advanced rehabilitation nursing intervention II, sports physiology, special rehabilitation nursing intervention. As for the clinical practice courses, assessment and evaluation for rehabilitation(64 hours), community and home based rehabilitation nursing(128 hours), hospital based rehabilitation nursing(128 hours), institution based rehabilitation nursing(96 hours) would be treated. 4. Contents of the curses were developed to correspond with the courses' objectives and specific items. 5. Evaluation would be carried out both in the lecture and in the clinical practice. The knowledge and skills of the students would be measured to ensure full validity and credibility. However this developed curriculum should be continuously modified and updated in more desirable direction.