• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.73-80
• /
• 2008

The objective of current study is to develop an optimization technique for the seismic actively controlled building structures using active tendon devices by an efficient solution of LQR control gain. In order to solve the active control system, the Ricatti closed-loop algorithm has been applied, and the state vector has been formulated by the transfer matrix and solved by a numerical technique of the trapezoidal rule. The time-delay problem has been also considered by phase compensation. To optimize the performance index, the ratio of the weighted matrix is the design variable, allowable story drift limits of IBC 2000 and tendon forces have been applied as restraint conditions, and the optimum control program has been developed with the algorithm of the SUMT technique. In examples of the optimization problem of eight stories shear buildings, it is evaluated that the optimum controlled building is more suitable in the control of earthquake response than the uncontrolled system and can reduce the performance index to compare with the controlled system with a constant ratio of the weighted matrix.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.43-51
• /
• 2012

This paper presents the design optimization technique for a phase interpolator(PI) and suggests the inductor-loaded PI structure for low power consumption suitable for high-speed applications. An analytical study leads to the design criterion composed of the process constants for the minimum power consumption and the proposed inductor-loaded PI reduces the power by half with determined bandwidth and gain of PI. Designed 7-bit PI using $0.13{\mu}m$ 1.2V CMOS technology consumes $721.2{\mu}W$ in 12GHz with inductor and the suggested optimization technique.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.138-144
• /
• 2006

In this paper, dual mode FET mixer for WiBro and wireless LAN(WLAN) applications has been designed in the form of dual gate FET mixer by using the cascode structure of two single gate pHEMTs. The designed dual gate mixer has been optimized to have variable conversion gain for WiBro and WLAN applications in order to save dc power consumption. The LO to RF isolation of the designed mixer is more than 20dB from 2.3GHz to 2.5GHz band. With the LO power of 0dBm and RF power of -50dBm, the mixer shows 15dB conversion gain. When RF power increases from -50dBm to -20dBm, the conversion gain decreases to -2dB from 15dB with bias change. The variable conversion gain has several advantages. It can reduce the high dynamic range requirement of AGC burden at IF stage. Also, it can save the dc power dissipation of mixer up to 90%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1757-1763
• /
• 2014

Optical wavelength division multiplexing signals of eight non-return-to-zero 10 Gb/s channels were transmitted on the long-haul link up to 720 km. The link span was composed of 80 km single mode fiber, dispersion compensation fiber for complete compensation, and EDFAs. A circulating loop method was applied to the link experiment and the loop was optimized for the transmission link. Wavelength-dependent gain variation of EDFA was compensated using EDFAs of opposite gain slopes without expensive gain flattening filters. Average OSNR was aggravated to 22 dB and the worst OSNR channel variation was 9.7 dB after the transmission. It was confirmed by analyzing optical spectra that this OSNR variation was mainly caused by the hole burning effect of EDFA.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.13-21
• /
• 2010

The Optimal results of Kalman Filtering on the Inverted Pendulum System requires an effective factor such as the noise covariance matrix Q, the measurement noise covariance matrix R and the initial error covariance matrix $P_0$. We present a special case where the optimality of the filter is not destroyed and not sensitive to scaling of these covariance matrix because these factors are unknown or are known only approximately in the practical situation. Moreover, the error covariance matrices issued by this method predict errors in the state estimate consistent with the scaled covariance matrices and not the issued state estimates. Various results using the scalar gain $\delta$ are derived to described the relations among the three covariance matrices, Kalman Gain and the error covariance matrices. This paper is described as follows: Section III a brief overview of the Inverted Pendulum system. Section IV deals with the mathematical dynamic model of the system used for the computer simulation. Section V presents a various simulation results using the scalar gain.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.5
• /
• pp.8-17
• /
• 2002

This paper considers the problems of robust decentralized control for uncertain discrete-time large-scale systems with delays in interconnections and state feedback gain perturbations. Based on the Lyapunov method, the state feedback control design for robust stability is given in terms of solutions to a linear matrix inequality (LMI), and the measure of non-fragility in controller is presented. The solutions of the LMI can be easily obtained using efficient convex optimization techniques. A numerical example is included to illustrate the design procedures.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.160-169
• /
• 2009

In the paper, the Image SNR(Signal-to-Noise) distribution proposed in [1] is reviewed from the three points of views: verification, variation, and application of the distribution. First, the proposed Image SNR distribution is verified through the noise-based simulation over a 2D image detector. Second, its variation over the linear/nonlinear gains shows that the noise-effect itself cannot explain every reason for the degraded Image SNR distribution. Third, through the application to optimal selection of the operation parameters, the usefulness of the proposed distribution is clarified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.907-915
• /
• 2001

본 논문에서는 차세대 이동통신인 IMT-2000 (하향: 1.885GHz∼2.025GHz) 주파수대역에서 동작하는 정사각형 적층구조 마이크로스트립 안테나를 설계 및 제작 측정하였다. 송/수신 주파수대역이 서로 상이한 IMT-2000 주파수대역에서 동작하도록 하기 위해 시뮬레이터를 사용하여 이중공진 안테나를 설계하였으며 최적화된 파라미터를 가지고 실제 제작 및 측정하였다. 측정된 결과는 다음과 같다. 공진주파수는 1.8475GHz, 2.2GHz에서 각각 나타났으며 대역폭은 각각 10.2%와 7.8%에 이르는 결과를 얻었다. 그리고 반사계수는 -18dB, -27dB로 나타났다. 이득은 시뮬레이터를 이용한 결과를 보면 8dB∼10dB의 높은 이득을 얻을 수 있음을 알 수가 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.555-556
• /
• 2015

MPEG 의 Royalty-Free 비디오 코덱의 하나로 표준화 중인 IVC(Internet Video Coding)에서는 화면내(intra) 예측부호화에서 부호화 이득을 위하여 $4{\times}4$ 블록 예측 및 $4{\times}4$ 블록 변환을 포함하고 있다. 반면, 화면간(inter) 예측부호화에서는 $16{\times}16$ 블록에서 최소 $8{\times}8$ 블록까지의 가변크기 블록에 대한 예측만 가능하다. 보다 복잡한 영상의 경우 보다 작은 블록에 대한 화면간 예측을 통하여 부호화의 성능 개선을 개선할 수 있다. 본 논문에서는 기존의 화면간 예측의 블록 크기를 $4{\times}4$ 블록까지 확장하여 화면간 예측부호화 성능을 개선한다. 실험결과 제안기법은 기존의 ITM 12.0 대비 다양한 테스트 시퀀스의 휘도성분에서 평균적으로 비트율 절감의 이득은 없으나 대부분의 클래스에서 성능개선을 보였고 추가적인 최적화가 필요함을 확인하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.75-78
• /
• 2006

본 논문에서 우리는 HIV-1 바이오 동역학모델의 퍼지 모델링 및 디지털 퍼지 제어 기법을 소개한다. 그것의 제어구조는 샘플링 점들에서 측정한 상태로부터 현재 상태를 대략적으로 예측하는 수치적 적분 구조를 사용한다. 제안된 지능형 디지털 재설계에서는 전역 상태-정합과 안정도 조건들을 동시적으로 만족하는 타당한 디지털 제어 이득들을 찾는 것이다. 우리는 보상된 블록-펄스 함수를 이용하여 새로운 전역 상태-정합 조건을 우선 제시하며 그리고 나서 안정도 조건들을 이 조건들에 추가한다. 유도된 조건들은 선형행렬 부등식으로 묘사되며, 그로인해 볼록 최적화 문제로 쉽게 해결될 수 있다. 또한, 안정도 조건으로 인한 성능 하강을 방지하기 위해 두 단계 지능형 디지털 재설계 과정이 제안된다. 첫 번째 단계에서는 전역 상태-정합만을 고려한 디지털 제어 이득을 찾는다. 두 번째 단계에서는 얻어진 디지털 제어하의 폐루프 시스템을 안정화 시키는 추가디지털 제어기를 설계한다.