• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.5-9
• /
• 2003

장주기 격자 필터를 이용한 EDFA용 이득평탄화 필터 설계에는 대역폭에 따라 한 개에서 세 개까지의 평탄화가 가능하다 이러한 필터 설계는 EDFA의 고유의 중심 파장, 크기, 대역폭에 대한 각 장주기 광섬유 격자의 중심 파장, 크기, 대역폭을 설정하여 이득평탄화를 최적화시킨다. 이득평탄화 필터의 설계를 위한 방법으로써 수동 설계통한 이득평탄화를 했으나, 신속하고 편리함을 위해 반자동 설계, 자동 설계 프로그램을 구현하였다. 이를 통한 이득평탄화 정도는, 수동이 0.38dB, 반자동 0.57dB, 자동 0.62dB 정도로 정밀한 이득평탄화를 얻을 수 있는 설계가 가능하였다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.58-62
• /
• 1997

A new, simple lasing loop configuration employing a fiber grating was proposed and demonstrated for all-optical gain control of erbium-doped fiber amplifier. The lasing loop was designed such that the fiber grating acts as a notch filter to cutoff the lasing light as well as selects the lasing wavelength. The operating gain was clamped to the same level as the loop loss and it could be varied with a tunable directional coupler in the loop. It is believed that this type of gain-controlled erbiumdoped fiber amplifier can have several advantages when used in wavelength-division-multiplexed transmission systems.

• Journal of Software Assessment and Valuation
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2019

Lasers for optical broadband communication systems should have excellent frequency selectivity and modal stability. DFB(Distributed Feedback) lasers have low lasing frequency shift during high speed current modulation. In this paper, I have developed a simulation software and analysed threshold gain and lasing frequency of a lasing mode in longitudinal direction of an 1.55um DFB laser with two mirrors and without anti-reflection coatings, that have both an index- and gain-gratings. The grating phase on a left mirror face is fixed as π/2 and the grating phase on a right mirror face is varied. As the phases of the index and gain gratings on the right mirror facet are π and 0, κL should be in the range of 2~6 in order to enhance the frequency stability. In order to reduce the threshold current of a lasing mode, κL should be greater than 8, regardless of the grating phases on the mirror faces.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.463-468
• /
• 2021

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.163-163
• /
• 2010

저차원 나노양자구조에서 전자적 구조와 광 이득에 대한 연구는 전자소자나 광소자의 효율을 증진시키는데 중요한 역할을 하고 있다. 전자적 부띠 구조를 결정하기 위해서는 변형효과와 비포물선 효과를 고려하여 계산하면 나노 양자구조의 전자적 구조를 비교적 정확하게 계산 할 수 있다. 양자우물에서의 광 이득은 전자적 구조에 따른 전도 대역의 전자와 가전자 대역의 정공 사이에 발생하는 쿨롱 상호작용에 의한 엑시톤 결합 에너지를 고려함으로 정확히 계산할 수 있다. 본 연구에서는 양자 우물의 격자 부정합에 따른 변형효과와 전도대역에서 전자 에너지의 비포물선 효과가 양자 우물의 전자적 성질에 미치는 영향에 대하여 조사하였다. 또한, 온도변화에 따른 양자 우물의 전자적 구조를 계산하였고, 전자적 구조에 따라 엑시톤 결합 에너지가 광 이득에 미치는 영향을 계산하였다. 양자우물 구조에서 전자 및 정공의 부띠에너지, 파동함수 및 부띠천이 에너지를 가변메시 유한차분법으로 결정하였고, interacting pair Green's function 방법과 energy space integrated function 방법을 이용하여 광 이득을 계산하였다. 계산한 결과를 광루미네센스 측정으로 관측한 부띠에너지 천이와 비교하여 변형효과와 비포물선 효과가 전자적 구조에 미치는 영향과 엑시톤 결합 에너지가 광 이득에 미치는 영향에 대하여 비교하였다. 반도체 양자우물의 전자적 구조는 변형효과와 비포물선 효과에 의하여 영향을 받고 있는 것을 알 수 있었다. 또한, 전자-정공의 쿨롱 상호작용을 고려하여 계산한 광 이득이 온도 변화에 따라 관측한 실험 결과와 잘 맞는 것을 알 수 있었다. 이러한 결과는 격자 부정합한 화합물 반도체 양자우물의 저차원적인 전자적 구조와 광 특성을 이해하는데 많은 도움이 된다고 생각된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.698-706
• /
• 2016

In order to move mobile robots to desired locations in a minimum time, optimal control problems have to be solved; however, their analytic solutions are almost impossible to obtain due to robot nonlinear equations. This paper presents a method to get optimal control gains of mobile robots using genetic algorithms. Since the optimal control gains of mobile robots depend on the initial conditions, the initial condition range is discretized to form some grid points, and genetic algorithms are applied to provide the optimal control gains for the corresponding grid points. The optimal control gains for general initial conditions may be obtained by use of neural networks. So the optimal control gains and the corresponding grid points are used to train neural networks. The trained neural networks can supply pseudo-optimal control gains. Finally simulation studies have been conducted to verify the effectiveness of the method presented in this paper.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.8-11
• /
• 2003

For the first time to our knowledge we have developed compact mechanically-induced long-period fiber grating devices which have an excellent tunability in the center wavelength and the depth of the notch. The compactness and ease to tune allow us to include them in other optical devices or systems. The devices were characterized by measuring their transmission spectra with different grating periods and applied pressures. We have also demonstrated the EDFA gain flattening using the mechanically-induced long-period fiber grating devices.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.80-91
• /
• 1999

We present various optimal grating structures which give the low threshold gain, good modulation characteristics, small effective linewidth enhancement factor, and large fabrication tolerance in complex-coupled MQW DFB lasers with absorptive gratings. To obtain these, we calculate the complex coupling coefficients using the extended additional layer method and the threshold gain including the modal loss in the absorptive grating region for rectangular and trapezoidal gratings. Based on the comparison of the results for various possible absorptive grating structures, the design guidelines are presented to obtain the low threshold gain or large fabrication tolerance. Among the grating structures studied, the double grating structure consisting of the absorptive grating on the index grating has the largest fabrication tolerance for the threshold gain and the coupling strength. The fabrication tolerance for the coupling ratio is very large for all the grating structures studied.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.419-425
• /
• 2020

In this paper, when a refractive index grating and a gain grating are simultaneously present in a DFB (Distributed Feedback) laser for a 1.55 um wavelength with two mirror surfaces without an anti-reflective coating, an analysis program was developed to determine the beam distribution of the oscillation mode in the longitudinal direction. As the phases of the index and gain gratings on the mirror faces are varied, the lasing gain and the beam profiles |R(z)| and |S(z)| of the lasing mode with the emitted power ratio P_l/P_r are analyzed and examined in case of δL<0. In order to reduce the threshold current of a oscillation mode and enhance the frequency stability, κL should be greater than 8, regardless of the grating phase values at the mirror surface.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.45-46
• /
• 2014

금속 격자 배열 안테나의 이득을 최적화하려면 격자배열 원소의 개구면 깊이를 조정하여 위치에 관계없이 동위상 특성을 이루도록 해야 한다. 각 개구면의 깊이가 안테나 이득에 미치는 영향은 서로 종속적이어서 결정론적인 방법으로 풀기는 쉽지 않다. 본 논문에서는 기존의 Armijo 법칙을 적용한 방향 탐색 기법을 제안한다. 실험결과 방향 탐색 기법은 금속 배열 안테나 최적화 문제에서 효율적인 것을 확인하였다.