• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.12a
• /
• pp.52.1-52
• /
• 2000

고분자 물질 용액에 감자 절편을 침지시의 탈수현상을 설명하기 위해 (1) 비정상 상태(unsteady state)에서의 확산 식을 초기시간에 대해 단순화시킨 모델, (2) 침지시간별로 수분확산계수와 평균확산계수를 비교하여 탈수현상을 설명하고자 한 모델, (3) 물질이동에 대한 Fick의 제2법칙을 무한평판의 조건에서 전체시간에 대해 전개한 모델 등 3가지 모델을 가정하여 검토한 결과 PEG용액에 감자절편을 침지했을 때 물질이동의 동력학적인 해석은 Fick의 제2법칙에 근거한 모델이 잘 적용되었으며 수분의 확산계수를 추정한 결과 8$\times$$10^{-7}$~4$\times$$10^{-6}$$cm^2$/s 범위였다.위였다.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.143-148
• /
• 2007

It is essential to know the flow characteristics at the risers of Flat-plate solar collector for optimum design. For flat-plate solar collector, it is difficult to experimentally study the effect for the number of riser in the collector for the economic problem. So, this study was performed to show the flow characteristics of flat-plate solar collector with the number of riser using commercial code FLUENT 6.0. The base collector size is chosen with $2\;m^2$ as 1m by 2m in this study, the mass flow rate was estimated 0.04 kg/s using the mass flow rate of 0.02 kg/s per collector area for the certificate test. The number of riser is selected 4, 6, 8, 10, 12, and 14. Through the simulation, the conditions with the risers of 10 or 12 is shown as the optimum design conditions for conventional flat-plate solar collector considering lower pressure drop and more uniformly distributed mass flow rate for higher heat transfer rate without considering heat transfer.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.263-266
• /
• 2013

표는 중요한 정보를 함축적으로 담고 있는 문서 요소로서 문서 영상에서 표의 내용과 구조를 분석하고 이해하려는 연구가 많이 진행되어 왔다. 이러한 표의 검출과 인식에 관한 기존의 연구들은 평판 스캐너로 취득한 문서 영상을 대상으로 이루어졌는데 최근에는 디지털 카메라와 스마트폰이 보급됨에 따라 평판 스캐너 대신 카메라를 이용한 표 인식의 필요성이 대두되고 있다. 따라서 본 논문에서는 카메라로 획득한 문서 영상에서 표 인식에 대한 알고리듬을 제안한다. 먼저 표가 선들의 집합으로 이루어져 있다는 가정 아래 문서 이미지에 존재하는 선을 이진화와 강인한 곡선 맞춤 알고리듬을 사용하여 검출한다. 검출된 선들의 교차점은 표의 요소일 수도 있으며 오검출의 결과일 수도 있는데 교차점 주변의 관찰 결과와 교차점 사이의 연관 관계를 에너지 식으로 표현하고 이 식을 최소화함으로써 각각의 교차점에 최적의 레이블을 할당한다. 얻어진 레이블은 표로 유일하게 변환되며 표의 구조를 셀 단위까지 추정할 수 있다. 다양한 표 영상에 대한 실험 결과를 통하여 제안한 방법이 문서영상의 기하학적인 왜곡에도 불구하고 영상에 존재하는 표를 성공적으로 인식함을 보여준다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.48-56
• /
• 2018

Due to the growing concerns of energy resource depletion and environmental destruction, the mass production of microalgae has been studied. The scale-up of a photobioreactor (PBR) is required for the mass production of biomass. In this paper, the geometric parameters and oxygen transfer rate (OTR) are considered, to scale up a flat panel photobioreactor (FP PBR). The PBR is designed using the goal-driven optimization (GDO) method to accomplish the scale-up. The local sensitivity of each output parameter with respect to the input parameter is analyzed through the design of experiment (DOE), and the design candidates are evaluated with the screening sampling method. The volumetric mass transfer coefficient is measured by the dynamic method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1146-1152
• /
• 2003

Satellite television receiving antenna is required for watching TV on the vehicles, ship and car. Recently TV is not only facility as getting information but one of utility in our life. In Korea, already on the service multi-channel satellite TV using excellent visibility and sound, and there are many users using now by fixing antenna. On this thesis, developed ship's satellite TV receiving antenna, the azimuth controlling is adopted azimuth information using gyro sensor and differential of receiving signal strength algorithm, and elevation controlling used gimbals. The result of this research is successfully implemented Korean satellite tracking antenna as performance until ${\pm}$30 degree roll and pitch of ship motion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2313-2318
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. This is time consuming and requires skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting method for the stress analysis of a curved beam plate. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at 0˚, 45˚, 90˚ and 135˚. Experimental results are compared with those of ANSYS and calculated by the simple beam theory. Good agreement among the results can be observed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.27-33
• /
• 2012

Photoelasticity is a technique of experimental methods and has been widely used in various domains of engineering to determine the stress distribution of structures. Without complicated mathematical formulation, this technique can conveniently provide a fairly accurate whole-field stress analysis for a mechanical structure. Here, stress distribution around an inclined crack tip of finite-width plate is studied by 8-step phase-shifting method. This method is a kind of photoelastic phase-shifting techniques and can be used for the determination of the phase values of isochromatics and isoclinics. According to stress-optic law, the stress distribution could be obtained from fringe patterns. The results obtained by polariscope arrangement combined with 8-step method and ABAQUS FEM simulations are compared with each other. Good agreement between them shows that 8-step phase-shifting method is reliable and can be used for determination of stress by experiment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.234-240
• /
• 2002

The static stability of the otter board in relation to the angle of attack ($\alpha$) was studied analytically and experimentally from the moments of tensions and hydrodynamic force acting on it. Three flat plates of 0.5, 1.0, and 1.5 aspect ratios (λ) and four cambered plates of 5, 10, 15, and 20% camber ratios (CR) with the same aspect ratio (λ=1.5) were tested in a circulating water tank for measuring the hydrodynamic forces and moments relevant to the position of hydrodynamic center. And, center-of-pressure coefficients ($C_p$) and moment coefficients ($C_M$) of each plate as a function of the angle of attack were calculated for estimating the static stability from hydrodynamic forces. The obtained results are summarized as follows ； 1． When the angle of attack for otter board is changed from equilibrium for some reason, moments depending upon tensions of warp and sweep line always act in order to have the static stability, respectively. 2. Position of center-of-pressure of each flat plate moves from leading edge to center of plate with the increase of the angle of attack. It means that the moment of hydrodynamic force acting on flat plates also increases the static stability of plate. 3. With the increase of the angle of attack for cambered plates, the positions of center of-pressure move from trailing to leading edge, and then turn toward center of plate. As the camber ratios increase, the ranges of the angle of attack of the static un stability depending on moment of hydrodynamic force become wide.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.148-154
• /
• 2014

Photoelasticity is a useful technique for obtaining the differences and directions of principal stresses in a model. In conventional photoelasticity, the photoelastic parameters are measured manually point by point. Identifying and measuring photoelastic data is time-consuming and requires skill. The fringe phase shifting method was recently developed and has been found to be convenient for measuring and analyzing fringe data in photo-mechanics. This paper presents an experimental study on the stress distribution along a horizontal line that passes the central point of a rhombus plate made of Photoflex (i.e., type of urethane rubber). The isoclinic fringe and/or principal stress direction is constant on this horizontal line, so a four-bucket phase shifting method can be applied. The method requires four photoelastic fringes that are obtained from a circular polariscope by rotating the analyzer at $0^{\circ}C$, $45^{\circ}C$, $90^{\circ}C$ and $135^{\circ}C$. Experimental measurements using the method were quantitatively compared with the results from FEM analysis; the results from the two methods showed comparable agreement.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.5
• /
• pp.477-482
• /
• 2000

For the purpose of explaining the dewatering phenomena of potato slice soaked in concentrated solution three models were proposed. Earlier model cannot explain the dewatering phenomena of potato slice in concentrated solution because of limiting its condition which is necessary to build a model. Therefore other three models were suggested and a model based on Fick\`s second law of mass transport at infinite plate conditions and numerical analysis was test model for explaining dewatering phenomena of potato soaked in concentrated solution. Apparent diffusion coefficient of water could be readily estimated from model III, and it could explain adequately the difference of the dewatering phenomena of various soaking conditions.