• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.213-217
• /
• 2010

Purpose: To emphasize the necessity of post-fitting by follow-up test, the mis-alignment was analyzed after initial wearing of toric soft contact lenses (TSCL). Methods: After trial contact lenses were worn to 87 eyes with myopic astigmatism for 1 week, we observed the alignment of axis mark on trial contact lenses using slit lamp and corrected the rotated axis by method of LARS. After final fitting, rotation ratio, rotation degree and rotation position were analyzed compared to initial prescription divided to amount of cylinderical and spherical powers. Results: Rotation ratio of TSCL's axis was increased as increment of both cylinderical powers and (-)spherical powers. An average of rotation degree was $10^{\circ}{\sim}13^{\circ}$ which was not related to amount of their powers. Rotation position of TSCL's axis was more to temporal than to nasal. Conclusions: Because mis-alignment of axis after TSCL wearing induce the poor sight, adjustment of axial alignment as a result of follow-up must be performed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.114-125
• /
• 2014

In a conventional sonar system, which uses LFM signal for detecting targets with varying speed, the results of multiple LFM Doppler correlators are aligned and the maximum alined result are selected as a test cell for detecting targets. As the number of the LFM Doppler correlators are increased for accurate target detection, as the required computational complexity and the memory are also increased. This fact makes it difficult to implement the accurate LFM target detector. In this paper, we propose a new fast target detection which is robust for the variation of target speed. Because the proposed method uses the summation of alined results of large numbers of LFM Doppler correlators, the proposed method increase SNR and provide robust SNR for the variation of target speed. And the proposed method can provide very fast target detection by implementing the process, the summation of alined results of large numbers of LFM Doppler correlators, as one summation filter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5296-5303
• /
• 2015

This study aimed to analyze the effect of flexi-bar exercise on changes in postural alignment and balance of juvenile soccer players. The subjects were juveniles soccer players divided into exercise and control groups of 10 players each. The exercise group performed a flexi-bar exercise for 30 minutes a day three times weekly for eight weeks, and the differences in postural alignment and balance before and after the experiment and between study groups were analyzed. The measurements before the subjects exercised revealed overall asymmetric postural alignments and balance toward the right and rear sides. The study results showed that the exercise group had a statistically significant improvement in the height and angle of both shoulder, scapula, pelvis and hands(p<.05) after performing the exercise. Changes in balance showed that the exercise group had statistically significant reduction in changes in curve length(p<.05). The study verified that flexi-bar exercise can be effective for improving the postural alignment and balance of juvenile soccer players.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.805-808
• /
• 2004

본 논문에서는 두 단백질의 구조적 유사성을 기반으로 한 단백질 비교를 위해서 전처리 기법으로서의 주성분분석기법을 소개한다. 기존의 백본 및 알파탄소 간의 거리행렬(distance matrix), 2차 구조 비교기법, 구역(segment)단위의 비교 기법과 같은 단백질 비교 기법들은 위치이동(translation)와 회전(rotation)에 불변한(invariant) 차이를 구하기 위하여 거리행렬을 이용하였다. 그리고, 난 다음 이들의 최적화 과정을 거쳤다. 그러나, 본 논문에서 제시하는 전처리 기법으로서의 주성분분석기법은 단백질 구조를 전체적인 구조 관점에서 위치를 정렬시킨 후에 단백질 간의 구조를 비교하는 방식이다. 단백질의 구조의 방향성(Orientation)을 맞춘 다음에는 다양한 단백질 표현으로 구를 비교할 수 있다. 본 논문에서는 두 단백질의 구조의 유사성을 측정하기 위한 간결한 단백질 표현(representation)으로 3 차원 에지 히스토그램을 사용하였다. 이 기법은 방향성을 정렬하기 위하여 기존의 방법에서 사용되었던 반복적인 거리계산을 통한 최적화하는 과정을 없앰으로써 단백질 구조 비교 시간을 단축할 수 있는 새로운 단백질 구조 비교 패러다임을 가능하게 한다. 따라서, 이 패러다임을 통하여 적절한 단백질 구조 방향성 정렬과 단백질 구조 표현을 이용한 단백질 구조 비교 검색 시스템은 많은 양의 단백질 구조 정보로부터 원하는 형태의 단백질 구조를 빠른 시간에 검색할 수 있는 장점을 가질 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.17-25
• /
• 2006

In the present study, a 2-D chimera technique for overlapped bodies in relative motion is developed using unstructured triangular meshes. The solid boundary nodes located next to the intersecting point between bodies are merged to the intersecting point to assure accurate representation of the intersecting region. In order to assign proper value of flow variables at the nodes located out of the computational field, interpolation is conducted for non-active nodes. For validation, the motions of a NACA64A006 airfoil and a NACA0012 airfoil with a plane flap are computed and the results are compared with other simulations. The motion of a launching missile ejected from a NACA0012 airfoil is also simulated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1511-1517
• /
• 2018

Mobile Device-to-Device (D2D) caching networks can transmit multimedia data to users directly without passing through any network infrastructure by storing popular multimedia contents in advance that are popular among many mobile users at caching server devices (CSDs) in distributed manners. Thus, mobile D2D caching networks can significantly reduce backhaul traffic in wired networks and service latency time of mobile users. In this paper, we propose an efficient transmission scheme that can enhance the transmission efficiency of mobile D2D caching networks by using multiple CSDs that are caching the contents that are popular among mobile users. By sorting the multiple CSDs that are caching a content that mobile users want to receive according to their channel gains, the proposed scheme can reduce the complexity of algorithm significantly, compared to an optimal scheme based on Brute-force searching, and can also obtain much higher network transmission efficiency than the existing Blanket and Opportunistic transmission schemes.

• Journal of Korea Game Society
• /
• v.17 no.1
• /
• pp.17-26
• /
• 2017

Several algorithms have been introduced to render motion blur in real time by solving the visibility problem in the spatio-temporal domains. However, some algorithms render at interactive frame rates but have artifacts or noise. Therefore, we propose a new algorithm that renders real-time motion blur using extruded triangles. Our method uses two triangles in the previous and the current frame to make an extruded triangle then send it to the rasterization. To solve the occlusion between extruded triangles for a given pixel, we introduce a combining solution using a sorting in front to back order and bitwise operations in the spatio-temporal dimensions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1049-1055
• /
• 2008

Modern multidisciplinary computational fluid dynamics often incorporates moving boundaries, as would be required in the applications such as design optimization, aeroelasticity, or forced boundary motion. It is challenging to develop robust, efficient grid deformation algorithms when large displacement of the moving boundaries is required. In this paper, a volume grid deformation code is developed based on the finite macro-element and the transfinite Interpolation, and then interfaces to a structured multi-block Navier-Stokes in-house code. As demonstrated by an airfoil with pitching motion, the hysteresis loops of lift, drag and moment coefficients of the developed method are shown to be in good agreement with those of experimental data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.35-40
• /
• 2011

In this paper, an auto recharging system for a mobile robot based on the wireless power transmission and visual information is proposed. The existing recharging systems for mobile robot use mechanical contact while wireless power transmission transfers energy by electromagnetic induction method without contacts. For efficiency of charging, alignment of coils is important. In order to solve this problem, with the visual image, ellipticity of coil circle is recognized to control the pose of mobile robot.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.164.2-164.2
• /
• 2012

인공위성레이저추적(SLR, Satellite Laser Ranging) 시스템은 인공위성까지 레이저를 발사하여 되돌아오는 시간간격을 측정함으로서 위성까지의 거리를 측정하는 시스템으로 현존하는 인공위성 궤도결정 시스템으로는 가장 정밀하다. 한국천문연구원은 우주추적 및 감시의 필요성이 증가함에 따라 2008년부터 40cm급 이동형 인공위성레이저추적 시스템을 개발을 시작하였고, 현재 개발을 완료하여 시험운영 중에 있다. 시스템 개발 과정 중에 발생할 수 있는 문제점들을 최소화하기 위해, 설계 단계에서 부품을 포함한 광기계 구조물에 대한 구조해석과, 실험실 프로토타입 구성 등을 실시하였다. 제작된 각 서브시스템별 조립 및 평가는 한국천문연구원이 보유한 광학계 조립 및 평가 시설을 이용하였다. 개발된 이동형 레이저 추적 시스템의 광학부는 추적마운트에 장착되었고, 현장 시험관측을 통해 수신광학계 및 광신호유도계의 정렬 및 제어항목 교정 등을 실시하였으며, 성공적으로 시험 영상 관측을 완료하였다. 이 발표에서는 이동형 레이저 추적 시스템 광학계의 개발 과정과 그 결과에 대해 보고한다.