• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.362-362
• /
• 2019

제주도는 화산섬의 지질특성상 지표수의 개발이용여건이 취약한 관계로 용수의 대부분을 지하수에 의존하고 있다. 따라서 제주도는 정책 및 연구적으로 오랜 기간 동안 지하수의 보전관리에 많은 노력을 기울여 오고 있다. 하지만 최근 기후변화로 인한 지하수위의 하강 및 해수면 상승으로 인한 해수침투의 문제가 꾸준히 제기되고 있으며, 제주도 일부지역에서는 축산폐수 등으로 인해 지하수의 수질오염문제가 발생하고 있다. 따라서 제주도 지하수의 수량 및 수질에 대한 체계적인 관리의 필요성이 증대되고 있다. 지하수에 절대적으로 의존하고 있는 제주도의 수자원의 개발 및 이용 여건을 고려할 때, 지하수의 수량 및 수질에 대한 학술적 토대가 확고히 구축되어야 할 뿐만 아니라 기후변화에 대응한 최적 물관리기법의 개발이 필요한 실정이다. 하지만 제주도의 수자원에 대한 기존의 연구들은 제주도 전역에 대해 최신의 분석방법을 사용한 종합적인 연구가 아닌 일부지역을 대상으로 한 지하지질분석, 지구물리탐사 및 대수성시험 위주의 단편적 분석, 개념적 수문모델의 적용에 의한 대략적인 분석, 또는 일부지역을 대상으로 한 지하수 흐름분석 및 해수침투 분석 위주로 수행되었다. 이러한 기존의 연구들은 여러 가지 문제점을 내포하고 있는데 첫째, 일부지역의 지하지질이 제주도의 복잡한 지하지질특성을 대표할 수 없다는 점과 둘째, 개념적 수문모델은 제주도와 같이 강우의 큰 시공간적 변동성을 고려할 수 없으며 지하지질 특성의 공간적 변동성 또한 적절히 반영할 수 없다는 점 및 셋째, 지하수의 이동은 유역경계와 일치하지 않으므로 독립된 소유역을 대상으로 산정한 지하수 부존량은 소유역내 실제 지하수 부존량과 다를 수 있다는 점 그리고 마지막으로 개별적으로 수행된 지표수, 지하수 및 수질 분석들은 서로 연결성이 없어 이들 간의 상호작용을 고려하지 않아 그 결과의 신뢰성이 떨어진다는 점 등이다. 이러한 제주도에 대한 기존 연구들의 한계점을 극복하기 위해서는 제주도 전역에 대한 종합적인 연구가 필요하다. 이를 위한 방안으로서 제주도 전체를 대상으로 한 최신의 분포형 수문모델의 구축이 필요하며 이 수문모델은 지표수 및 지하수의 상호작용과 해수침투 및 수질 또한 모의할 수 있어야 할 것이다. 그리고 이 개발된 모형과 기후변화 시나리오를 사용하여 미래 수자원변화에 대한 대응이 필요하다. 이에 대한 해외연구사례로서 미국지질조사국이 하와이 섬들 및 괌 등에 대해 수행했던 연구들을 참고할 수 있다. 제주도 전체에 대한 신뢰할만한 종합적인 분석결과는 제주도 수자원의 정책수립에 기초로 활용할 수 있을 것이다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.330-336
• /
• 2021

In bistatic sonar operation, the scattering strength of a sonar target is characterized by the probe signal frequency, the aspect angle and the bistatic angle. Therefore, the target detection and identification performance of the bistatic sonar may vary depending on how the positions of the target, sound source, and receiver are changed during sonar operation. In this study, it was evaluated which variable is advantageous to change by comparing the target identification performance between the case of changing the aspect angle and the case of changing the bistatic angle during the operation. A scenario of identifying a hollow sphere and a cylinder was assumed, and performance was compared by classifying two targets with a support vector machine and comparing their accuracy using a finite element method-based acoustic scattering simulation. As a result of comparison, using the scattering strength defined by the frequency and the bistatic angle with the aspect angle fixed showed superior average classification accuracy. It means that moving the receiver to change the bistatic angle is more effective than moving the sound source to change the aspect angle for target identification.

• Journal of Climate Change Research
• /
• v.3 no.1
• /
• pp.39-50
• /
• 2012

KMA(Korea Meteorological Administration) projected that annual mean temperatures of South Korea will rise $3.8^{\circ}C$ and the annual total precipitation will increase by 17 percent by 2100. Rainfall is concentrated during the summer in South Korea. Thus the risk of landslide by heavy rain is expected to increase. After the landslide of Mt. Umyeon occurred in July 2011, disaster of forest sector is highlighted. Therefore vulnerability assessment of landslide is urgent. However, vulnerability assessment based on local governments was not done yet. In this study, we assess vulnerability of landslide by heavy rain for local governments. We used several scenarios to consider uncertainty of climate change. Through this study, local governments can use the results to establish adaptation plans. Also, the results could be used to decrease vulnerability of landslide.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.566-576
• /
• 2018

The C-ITS requires the lane level positioning of the vehicle in the land transportation environment, and it is most effective to utilize the GNSS. In the precision positioning system based on satellite navigation, the evaluation of dynamic environment of lane level positioning performance should be accompanied and the evaluation system configuration should be preceded. In this paper, we selected performance indicators, assessment equipment, and reliability of reference equipment for evaluation of precision positioning user systems based on the GNSS. The performance evaluation system described above is applied to a real system, and the performance evaluation tool developed for the evaluation system is described. The numerical performance evaluation was carried out based on the data collected by carrying out the actual testbed driving. The performance evaluation by the actual driving trajectory and driving image comparison was performed to derive and analyse the evaluation results of the vehicle lane level positioning user system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.617-626
• /
• 2019

This study analyzes the optimal location of gas detectors through the gas dispersion in a cargo compressor room of a 174K LNG carrier equipped with high-pressure cargo handling equipment; in addition, we propose a reasonable method for determining the safety regulations specified in the new International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC). To conduct an LNG gas dispersion simulation in the cargo compressor room-equipped with an ME-GI engine-of a 174 K LNG carrier, the geometry of the room as well as the equipment and piping, are designed using the same 3D size at a 1-to-1 scale. Scenarios for a gas leak were examined under high pressure of 305 bar and low pressure of 1 bar. The pinhole sizes for high pressure are 4.5, 5.0, and 5.6mm, and for low pressure are 100 and 140 mm. The results demonstrate that the cargo compressor room will not pose a serious risk with respect to the flammable gas concentration as verified by a ventilation assessment for a 5.6 mm pinhole for a high-pressure leak under gas rupture conditions, and a low-pressure leak of 100 and 140 mm with different pinhole sizes. However, it was confirmed that the actual location of the gas detection sensors in a cargo compressor room, according to the new IGC code, should be moved to other points, and an analysis of the virtual monitor points through a computational fluid dynamics (CFD) simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.423-430
• /
• 2019

The convergence of the automotive industry and the ICT technology can be broadly divided into the commercial service sector and the Cooperative-ITS (C-ITS) service sector. The C-ITS service sector is using V2X communication technology as a field that aims to provide safer transportation, more green and efficient transportation, and more predictable and productive mobility. The recent convergence of self-driving cars and connected cars requires high data rates, low transmission delays, and low transmission error rates. Interest in comparison of performance between WAVE and C-V2X (LTE-V2X, 5G-V2X) has been amplified and application services by communication technology are being studied. In this paper, we design the application performance evaluation method of Hybrid V2X communication system and confirm that the decrease of packet error rate (PER) performance is caused by the increase of communication distance, not the vehicle speed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.174-192
• /
• 2021

The LIDAR sensor, which provides higher cognitive performance than cameras and radar, is difficult to apply to ADAS or autonomous driving because of its high price. On the other hand, as the price is decreasing rapidly, expectations are rising to improve existing autonomous driving functions by taking advantage of the LIDAR sensor. In level 3 autonomous vehicles, when a dangerous situation in the cognitive module occurs due to a sensor defect or sensor limit, the driver must take control of the vehicle for manual driving. If the driver does not respond to the request, the system must automatically kick in and implement a minimum risk maneuver to maintain the risk within a tolerable level. In this study, based on this background, a LIDAR-based LKS MRM algorithm was developed for the case when the normal operation of LKS was not possible due to troubles in the cognitive system. From point cloud data collected by LIDAR, the algorithm generates the trajectory of the vehicle in front through object clustering and converts it to the target waypoints of its own. Hence, if the camera-based LKS is not operating normally, LIDAR-based path tracking control is performed as MRM. The HAZOP method was used to identify the risk sources in the LKS cognitive systems. B, and based on this, test scenarios were derived and used in the validation process by simulation. The simulation results indicated that the LIDAR-based LKS MRM algorithm of this study prevents lane departure in dangerous situations caused by various problems or difficulties in the LKS cognitive systems and could prevent possible traffic accidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.573-582
• /
• 2021

In this study, a series of processes for evaluating the effective protection against barriers that should be equipped in institutions that perform reliability tests on high-risk ammunition, such as high-explosive ammunition, were introduced. The impact that high-explosive bombs can have on personnel includes damage to the eardrum and lungs caused by explosion overpressure and penetrating wounds that can be received by fragments generated simultaneously with the explosion. Therefore, a high-explosive with COMP B explosives as its contents were set up, and an explosion protection theory investigation to calculate the degree of damage, numerical calculations and simulations were performed to verify the protection power. A numerical calculation revealed the maximum explosion overpressure on the protective wall when the high-explosive exploded and the penetration force of the fragment against a 50 mm-thick protective wall to be 77.74 kPa and 41.34 mm, respectively. In the simulation verification using AUTODYN, the maximum explosion overpressures affecting the firewall and personnel were 56.68 kPa and 18.175 kPa, respectively, and the penetration of fragments was 35.56 mm. This figure is lower than the human damage limit, and it was judged that the protective power of the barrier would be effective.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.141-152
• /
• 2022

As interest increases related to the development of eco-friendly energy, the offshore wind turbine market is growing at an increasing rate every year. In line with this, the demand for an installation vessel with large scaled capacity is also increasing rapidly. The wind turbine installation vessel (WTIV) is a fixed penetration of the spudcan in the sea-bed to install the wind turbine. At this time, a review of the spudcan is an important issue regarding structural safety in the entire structure system. In the study, we analyzed the current procedure suggested by classification of societies and new procedures reflect the new loading scenarios based on reasonable operating conditions; which is also verified through FE-analysis. The current procedure shows that the maximum stress is less than the allowable criteria because it does not consider the effect of the sea-bed slope, the leg bending moment, and the spudcan shape. However, results of some load conditions as defined by the new procedure confirm that it is necessary to reinforce the structure to required levels under actual pre-load conditions. Therefore, the new procedure considers additional actual operating conditions and the possible problems were verified through detailed FE-analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.601-609
• /
• 2022

Jack-up drilling rigs are mobile offshore platforms widely used in the offshore oil and gas exploration industry. These are independent, three-legged, self-elevating units with a cantilevered drilling facility for drilling and production. A typical jack-up rig includes a triangular hull, a tower derrick, a cantilever, a jackcase, living quarters and legs which comprise three-chord, open-truss, X-braced structure with a spudcan. Generally, jack-up rigs can only operate in water depths ranging from 130m to 170m. Recently, there has been an increasing demand for jack-up rigs for operating at deeper water levels and harsher environmental conditions such as waves, currents and wind loads. All static and dynamic loads are supported through legs in the jack-up mode. The most important issue by society is to secure the safety of the leg structure against collision that causes large instantaneous impact energy. In this study, nonlinear FE -analysis and verification of the requirement against collision for 35MJ recommended by DNV was performed using LS-Dyna software. The colliding ship used a 7,500ton of shore supply vessel, and five scenarios of collisions were selected. From the results, all conditions do not satisfy the class requirement of 35MJ. The loading conditions associated with chord collision are reasonable collision energy of 15M and brace collisions are 6MJ. Therefore, it can be confirmed that the identical collision criteria by DNV need to be modified based on collision scenarios and colliding members.