• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.617-624
• /
• 2010

Line heating is a manufacture method, which was widely used to machining a curved surface in the ship construction. The qualities using by line heating are very difference compare to the proficiency level of the engineer. So it's mainly depend on the automation equipment instead of the proficiency level engineer. In this study, it would be investigate the temperature distribution of the heating plate, which was used by the automation equipment according to line heating. The main factors are the moving velocity of the heating source, strength and the heating method separately, in temperature distribution while line heating. In this paper, it was investigated the temperature change with the vary of each three variables. The numerical result showed that peak temperature decrease if the moving velocity of the heating source increased. It can also calculate the change quantitatively that the peak temperature and temperature distribution changed linearly with the vary of the heating source.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.189-197
• /
• 2009

The purpose of this study is to analyze the relationships between the traffic accidents of elderly pedestrians and barrier-free facilities in the case of Cheongju. First, many accidents of elderly pedestrians were determined to occur in the road and during crossing. Second, the correlation analysis shows that the paving conditions, guiding blocks and embossed blocks have impacts on elderly safety. Finally, the logistic regression model, which is statistically significant (chi-square =0.000, Nagelkerke =0.198), was developed, and includes the paving conditions, bollards, audible signals and remaining time signs as the independent variables. The variables, with the exception of the existence of bollards, are all analyzed to have positive impacts to elderly safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.60-71
• /
• 2017

The purpose of this study is to evaluate vertical moving facilities at subway stations for the elderly users and to analyze their improvement measures. To evaluate vertical moving facilities of the top 31 subway stations with the most trips in Seoul, a data envelopment analysis (DEA) is employed. The input variables for the DEA include the number and percentage of elderly users, which are calculated using smart card data. the output variables consist of the number of elevators and escalators per 100 steps. The results show that the average score of 31 subway stations is 0.62 and four stations, i.e., Jamsil, Gasan Complex, Konkuk University, and Dongmyo, have the highest score. These four subway stations are set as benchmarking groups for the other stations with the lower score. Based on the comparison with the benchmarking groups, the improvement measures for vertical moving facilities of each station are suggested and discussed.

• Korean Journal of Digital Imaging in Medicine
• /
• v.8 no.1
• /
• pp.51-55
• /
• 2006

The effects of Asaddition in amorphous selenium(a-Se) films for digital X-ray conversion material have been studied using the moving photocarrier grating(MPG) technique. This method utilizes the moving interference pattern generated by the superposition of the two frequency shifted laser beams for the illumination of the sample. This moving intensity grating induces a short circuit current, j$_{sc}$ in a-Se:As film. The transport parameters of the sample are extracted from the grating-velocity dependent short circuit current induced in the sample along the modulation direction. The electron and hole mobility, and recombination lifetime of a-Se films with arsenic(As) additions have been obtained. We have found an Increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density. The transport properties for As doped a-Se films obtained by using MPG technique have been compared with X-ray sensitivity for a-Se:As device. The fabricated a-Se(0.3% As) device film exhibited the highest X-ray sensitivity out of 5 samples.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.1-9
• /
• 2000

A new method, the external resistance method (ERM method), is proposed for accurate extraction of the gate bias-dependent effective channel carrier mobility (${\mu}_{eff}$) and separated parasitic source/drain resistances ($R_S$ and $R_D$) of n-channel MOSFET's. The proposed ERM method is applied to n-channel LDD MOSFETs with two different gate lengths ($W_m/L_m=30{\mu}m/0.6{\mu}m,\;30{\mu}m/1{\mu}m$) in the linear mode of current-voltage characteristics ($I_D-V_{GS},\;V_{DS}$). We also considered gate voltage dependence of separated $R_2$ and $R_D$ in the accurate modeling and extraction of effective channel carrier mobility. Good agreement of experimental data is observed in submicron n-channel LDD MOSFETs. Combining with capacitance-voltage characteristics, the ERM method is expected to be very useful for accurate and efficient extraction of ${\mu}_{eff},\;R_D,\;R_S$, and other characteristic parameters in both symmetric and asymmetric structure MOSFET's in which parasitic resistances are critical to the improvement of high speed performance and reliability.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.848-855
• /
• 1995

The influence of gravitational effect on the retention behaviors of polystyrene (PS) and polymethylmethacrylate (PMMA) in flat type thermal field flow fractionation (Thermal FFF) was studied. In the case of downward flow of mobile phase, the gravitational effect acting in the same direction of mobile phase flow increases as the angle of the system from the horizontal line (0˚to 60˚) increases. The decreasement of retention time of PS & PMMA was found. Also, the increasement of dimensionless λ values was found. And the difference in the retention time of PS & PMMA having different molecular weight decreases and also the resolution decreases. In the case of upward flow of mobile phase, the gravitational effect acting in the opposite direction of mobile phase flow increases as the angle of the system from the horizontal line (0˚to 60˚) increases. The increasement of retention time of PS & PMMA was found. Also, the decreasement of dimensionless λ values was found. And the difference in the retention time of PS & PMMA having different molecular weight increases and also the resolution increases.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.375-382
• /
• 2019

In this study, an experimental study on the buildability of the structure using the developed printing materials and equipment was performed. Experimental variables included the moving speed of nozzles(=80 and 100mm/s), the revolutions per minute (RPM) of screw in discharge buckets, and the aspect ratio(=1.67 and 5.00) reflecting wall length of the structures. Buildability of the 3D printed concrete structures was analyzed based on the maximum decomposition layer and collapse patterns of the structures according to the experimental variables. The nozzle movement speed of 80mm/s and the aspect ratio of 1.67 were favorable for 3D printing in this study. The collapse process of structure due to uneven layer decomposition was also analyzed through the relative displacement measurement of the lower part of the structure during printing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.1-6
• /
• 2019

One method for image recognition is template matching. In conventional template matching, the block matching algorithm (BMA) is performed while changing the two-dimensional translational displacement of the template within a given matching image. The template size and shape do not change during the BMA. Since only two-dimensional translational displacement is considered, the success rate decreases if the size and direction of the object do not match in the template and the matching image. In this paper, a variable is added to adjust the two-dimensional direction and size of the template, and the optimal value of the variable is automatically calculated in the block corresponding to each two-dimensional translational displacement. Using the calculated optimal value, the template is automatically transformed into an optimal template for each block. The matching error value of each block is then calculated based on the automatically deformed template. Therefore, a more stable result can be obtained for the difference in direction and size. For ease of use, this study focuses on designing the algorithm in a closed form that does not require additional information beyond the template image, such as distance information.

• Asia Marketing Journal
• /
• v.7 no.2
• /
• pp.47-69
• /
• 2005

With the explosive growth of mobile products industry, tons of newer versions of products are putting on the market. From the marketer's perspective, understanding consumers' replacement purchases, especially the replacement timing, is essential to product planning and selling. This study presents an approach to finding out factors influencing the timing of buyers' replacement purchases of cell phones, using duration analysis; a hazard function specification is applied to describe consumers' replacement timing decision. Based on the data collected from a mobile telecommunication company, five categories of factors have been inspected. These are consumer's innovative service usage, data service usage, voice service usage, participation in loyalty programs, and the demographic characteristics. The results of the study are as follows. Firstly, the positive coefficient of 'the number of related services used' suggests that the consumers who have more usage knowledge tend to replace faster. Secondly, customers participating in the membership service are positively associated with early replacement purchases. Lastly, younger customers(vs. older) and male(vs. female) customers turned out to replace cell phones earlier.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.416-416
• /
• 2012

유기물을 기반으로 하는 유기발광소자, 유기메모리 및 유기 태양전지 등과 같은 차세대 전자소자는 기존의 무기물 기반의 소자에 비해 가격이 싸고 제작방법이 간단하며 휘어지게 만들 수 있다는 장점을 갖기 때문에 많은 관심을 받고 있다. 유기물을 기반으로 한 전자 소자의 효율을 향상시키기 위해서는 유기물질이 갖는 고유의 물리적 특성에 관한 연구가 중요하다. 특히, 유기물 내에서의 전하 전송 메카니즘을 이해하기 위해 유기물의 전자 이동도에 대한 연구가 중요하나, 아직까지 유기물질을 기반으로 한 전자 소자의 전자 이동도에 대한 이론적인 연구가 비교적 적다. 본 연구에서는 유기물 내에서의 트랩 분포 변화에 따른 전자 이동도를 몬테카를로 방법을 이용하여 계산하였다. 시뮬레이션을 위한 기본 구조로 소자의 길이는 30-300 사이트로 하였으며, 이웃한 사이트간 거리는 $3{\acute{\AA}}$로 결정하였다. 유기물 내에 존재하는 트랩의 분포는 가우시안 분포로 가정하였고, 트랩의 분산도와 트랩 총량을 변화시켜 계산하였다. 이웃한 트랩간의 천이 확률을 Miller and Abrahams 식을 이용하여 계산하고, 트랩간의 천이시간을 랜덤 변수로 결정하였고, 이들을 통계적으로 처리하여 유기물 내에서의 전자 이동도를 계산하였다. 시뮬레이션 결과는 유기물의 트랩분포가 일정할 경우 전자 이동도는 전계가 증가함에 따라 일정하게 증가하다가 일정 전계에서 포화된 후 다시 감소한다. 초기의 전계 영역에서는 전계의 증가에 따라 유기물 내 트랩간의 천이 확률이 증가하기 때문에 전자 이동도가 증가한다. 하지만, 일정 전계 이상에서는 전자의 이동 속도가 거의 변하지 않기 때문에, 전계의 증가에 따라 전자 이동도는 오히려 줄어들게 된다. 트랩의 분산도가 증가함에 따라 낮은 전계 영역에서는 전자 이동도가 작고, 전계가 증가할수록 분산도와 상관없이 전자 이동도가 비슷한 값으로 수렴한다. 트랩의 분산도가 30 meV로 작을 경우에 일정 온도 이상에서의 전자 이동도는 포화되어 일정한 값으로 유지한다. 유기물 내에 존재하는 트랩 분포에 따라 온도의 변화가 전자 이동도에 미치는 영향이 달라짐을 알 수 있다. 이러한 결과는 유기물질을 기반으로 한 전자소자에서의 전하 전송 메카니즘을 이해하고 소자의 제작 및 특성 향상에 도움이 된다고 생각한다.