• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.224-229
• /
• 2011

Recently, the management of the marine invasive alien species introduced by ballast water has come to the core as an urgent task. Because, hazardous organisms cause harmful effects on the ecosystem. Hazardous organisms also negatively affect fisheries, commercial shipping activities, and marine resources. In this regard, IMO used to operate GloBallast, Ballast Water Risk Assessment System, in order to manage the introduction of invasive species by ballast water. GloBallast is constructed to assess the relative risk due to the movement of ballast water between nations, using the volume and the number of times of ballast water discharge, the environmental similarity between ports, and the abundance of hazardous species as the main factors. According to the results of the demo-operation of GloBallast, it was found out that the environmental similarity factor had affected most highly the results of risk assessment. Therefore, in this study, the correlation between the main factors used in GloBallast risk assessment were re-examined, and some methods were suggested in order to reflect these main factors in the risk assessment more reasonable.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.42-48
• /
• 2002

The design, construction and performance test of a convenient multi-purpose irradiator is described. A multi-purpose irradiator using Cesium-137 has been developed for studies of low dose radiation effects in biology and for calibration of Thermo Luminescent dosimeter(TLD). During the operation, three rods of radioactive material which are 10cm in length revolve 180 degrees and irradiate biological samples, or TLD, and return to their shielded position, after the programmed time. A programmable Logic Controller(PLC) controls the sequence of operation, interlock, motor rotation and safety system. The rotation speed of biological samples can vary up to 20 RPM. A real time monitoring system was also incorporated to check and control the operation status of the irradiator. The capacity of the irradiation chamber was 4.5 liters. The isodose distribution at arbitrary vertical planes was measured by using film dosimetry. The dose-rate was 0.13 cGy/min in air and 0.11 cGy/min in water equivalent material in the case of Cesium-137. Range of activity was 2 Ci. The homogeneity of dose distribution in the chamber was ${\pm}$7%. The actual radiation level on the surface was within permissible levels. The irradiator had a maximum 0.35 mR/min radiation leakage on its surface.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.80-90
• /
• 2005

Activity durations retain probabilistic and stochastic natures due to diverse factors causing the delay or acceleration of activity completion. These natures make the final project duration to be a random variable. These factors are the major source of financial risk. Extending the Stochastic Project Scheduling Simulation system (SPSS) developed in previous research; this research presents a method to estimate how the final project duration behaves when activity durations change randomly. The final project cost is estimated by considering the fluctuation of indirect cost, which occurs due to the delay or acceleration of activity completion, along with direct cost assigned to an activity. The final project cost is estimated by considering how indirect cost behaves when activity duration change. The method quantifies the amount of contingency to cover the expected delay of project delivery. It is based on the quantitative analysis to obtain the descriptive statistics from the simulation outputs (final project durations). Existing deterministic scheduling method apply an arbitrary figures to the amount of delay contingency with uncertainty. However, the stochastic method developed in this research allows computing the amount of delay contingency with certainty and certain degree of confidence. An example project is used to illustrate the quantitative analysis method using simulation. When the statistical location and shape of probability distribution functions defining activity durations change, how the final project duration and cost behave are ascertained using automated sensitivity analysis method

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.135-140
• /
• 2021

In this paper, we propose an on-line mechanism that simultaneously detects cracks and profiling pavement blocks to detect the displacement of ground surface adjacent to the excavation in the urban area. The proposed method utilizes a 2D laser to profile the information about pavement blocks including the depth and distance among them. In particular, it is designed to enable the detection of cracks and portholes at runtime. For the experiment, real data was collected through Gocator, and trainng was carried out using Faster R-CNN. The performance evaluation shows that our detection precision and recall are more than 90% and the pavement blocks are profiled at the same time. Our proposed mechanism can be used for monitoring management to quantitatively detect the level of excavation risk before a large-scale ground collapse occurs.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.329-352
• /
• 2005

Long term observations of full-disk Lyman-o irradiance have been made by the instruments on various satellites. In addition, several sounding rockets dating back to the 1950s and up through the present have measured the $Lyman-{\alpha}$ irradiance. Previous full disk $Lyman-{\alpha}$ images of the sun have been very interesting and useful scientifically, but have been only five-minute 'snapshots' obtained on sounding rocket flights. All of these observations to date have been snapshots, with no time resolution to observe changes in the chromospheric structure as a result of the evolving magnetic field, and its effect on the Lyman-o intensity. The $Lyman-{\alpha}$ Imaging Solar Telescope(LIST) can provide a unique opportunity for the study of the sun in the $Lyman-{\alpha}$ region with the high time and spatial resolution for the first time. Up to the 2nd year development, the preliminary design of the optics, mechanical structure and electronics system has been completed. Also the mechanical structure analysis, thermal analysis were performed and the material for the structure was chosen as a result of these analyses. And the test plan and the verification matrix were decided. The operation systems, technical and scientific operation, were studied and finally decided. Those are the technical operation, mechanical working modes for the observation and safety, the scientific operation and the process of the acquired data. The basic techniques acquired through the development of satellite based solar telescope are essential for the construction of space environment forecast system in the future. The techniques which we developed through this study, like mechanical, optical and data processing techniques, could be applied extensively not only to the process of the future production of flight models of this kind, but also to the related industries. Also, we can utilize the scientific achievements which are obtained throughout the project And these can be utilized to build a high resolution photometric detectors for military and commercial purposes. It is also believed that we will be able to apply several acquired techniques for the development of the Korean satellite projects in the future.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2008

The initiation and growth processes of cyclic ice body in porous systems are affected by the thermo-physical and mass transport properties, as well as gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and the deterioration by the accumulated damages are hard to identify in tests. In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the response surface method (RSM) is used. The important parameters for cyclic freeze-thawdeterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used to compose the limit state function. The regression equation fitted to the important deterioration criteria, such as accumulated plastic deformation, relative dynamic modulus, or equivalent plastic deformations, were used as the probabilistic evaluations of performance for the degraded structural resistance. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages due to the cyclic freeze-thaw using the proposed prediction method.

• Journal of the korean veterinary medical association
• /
• v.44 no.9
• /
• pp.803-818
• /
• 2008

동물의 결핵은 Mycobacterium bovis의 감염에 의한 만성 소모성 질병이며 인수공통전염병이다. 동물로부터 사람으로의 결핵 전염은 생유 섭취하던 시대에 상당히 많이 보고되었다. 우유의 살균처리와 소에서 피내진단에 의한 양성우 살처분 및 보상금 지급 정책을 전개하면서 M. bovis의 사람전염은 급격히 감소하였다. 소 결핵은 우리나라에서 연간 0.15% 내외의 발생을 보이고 있으며, 발생의 주원인으로는 외부입식소, 인근발생농장, 과거발생농장의 사후관리소홀 등이다. 사람 결핵의 주원인균인 M. tuberculosis와 M. bovis는 유전체가 99.9% 유사하며, M. bovis를 M. tuberculosis의 아종으로 분류하기도 한다. 두 세균은 M. tuberculosis complex에 속하며, M. tuberculosis와 M. bovis이외에도 M. africanum, M. canettii, M. microti, M. pinnipedii 등이 있다. M. bovis는 M. tuberculosis complex중에서 가장 넓은 숙주범위를 가진다. M. bovis의 대표적인 숙주는 종이름에도 나타나 있듯이 소이다. 소결핵 전파원으로서는 M. bovis에 감염된 소가 가장 중요하다. 소 이외에도 면양, 산양, 말, 돼지, 사슴, 엘크, 영양 (antelope, kudus, elands, sitatungas, oryxes, addaxes), 개, 고양이, 흰족제비 (ferrets), 낙타, 여우, 밍크, 오소리, 쥐, 영장류, 라마, 맥 (tapirs), 코끼리, 코뿔소 (rhinoceroses), 주머니쥐, 땅다람쥐 (ground squirrels), 수달 (otters), 물개, 산토끼 (hares), 두더쥐 (moles), 너구리 (raccoons), 코요테, 사자, 호랑이, 표범, 살쾡이 (lynx) 등에 감염될 수 있으나, 대부분 종결숙주 (spillover host)로 가축의 결핵방제가 유지되고 있는 국가에서는 야생동물 결핵의 가축 전염이 문제시되고 있다. M. bovis는 주로 호흡기와 소화기를 통하여 감염되며, 결핵결절이 형성되는 부위를 관찰하면 감염경로를 추정할 수 있다. 결핵에 감염되면, 초기에는 뚜렷한 임상증상을 보이지 않으나, 아침, 추운 날씨, 또는 운동 중에 심한 기침을 하며, 호흡곤란을 일으킬 수 있다. 결핵은 감염되어도 대부분 무증상이기 때문에 피내진단, 결핵결절 병리소견, 원인균 분리 등에 의해 진단하여야 한다. 감염된 결핵균은 탐식세포에 탐식되어 특징적인 육아종성 결절 병변으로 진행된다. 현재 결핵은 피내진단과 결핵결절 병리소견 등에 의해 판정하고 있다. 최신 진단법으로는 피내진단을 대체할 수 있는 인터페론 감마 검사법과 우군의 결핵 스크리닝과 말기 결핵 검사에 우수한 항체진단법이 개발되어 있다. 그러나, 소 결핵 근절을 위해서는 일관성있는 진단법과 진단기준을 적용하는 것이 중요한 성공요인중 하나이다. 소결핵 청정국인 호주와 캐나다에서는 피내진단과 도축장 결절검사를 결핵 양성우 색출방법의 근간으로 삼고 있으며, 소결핵 근절의 최종단계에 이르러서는 특이적인 검사법을 적용하였지만, 근절목적상 민감성이 높은 피내진단법을 사용하였다. 이와 더불어, 피내진단 양성우의 부검소견과 원인균 분리를 통해 결핵을 확진하여 출처농장의 역추적 검사를 통하여 결핵 양성소를 제거하였다. 한편, 결핵의 농장간 및 지역간 전파방지를 위해 결핵 청정농장과 결핵 오염농장, 결핵 청정지역과 결핵 오염지역 구분을 통하여 결핵 오염농장과 결핵 오염지역으로부터 결핵 청정농장과 결핵 청정지역으로의 이동전 결핵 검진을 통해 개체 이동에 따른 결핵 전파를 근본적으로 차단하는 시스템을 엄격히 적용한 것이 주요한 성공 요인중 하나였다. 호주 결핵 근절정책 성공요인을 요약하면, 일관성 있는 결핵진단법 적용, 양성우 출처농장의 철저한 역추적 검사, 개체 이동전 결핵 음성증명 확인, 농가단체의 경제적 및 방역상 적극적인 지원 및 협조 결핵의 지속적인 모니터 링과 현장요구에 부응하는 방제신기술의 지속적인 연구개발 등을 들 수 있다. 최근 들어 국내 동물 결핵은 소, 특히, 한우의 결핵발생이 증가하고 있으며, 사슴 결핵발생도 증가하고 있다. 농장간 및 지역간에 결핵 감수성 가축, 특히, 소와 사슴의 거래가 아주 복잡하게 이루어지고 있는 현실을 고려할 때, 결핵전파의 주원인인 결핵감염 소나 사슴의 농장내 반입을 철저히 차단해야 할 것이다. 이때, 개체 검사는 물론이고, 출처농장에 대한 결핵 음성을 확인한 후 입식하여야 할 것이며, 입식 후에도 60일정도 격리사육하면서 피내진단등 결핵검진 후 음성인 경우에만 합사하여야 할 것이다. M. bovis는 사람을 비롯한 거의 모든 온혈동물에서 결핵을 일으킬 수 있기 때문에, 결핵 감염소로 판정된 농장 종사자는 각 시도 보건소의 협조를 받아 결핵검진을 받도록 해야 한다. 농장 가축에 접촉할 수 있는 야생동물의 접촉을 차단하여야 하며, 특히, 농장 사료의 야생동물에 의한 오염을 방지할 수 있는 사료창고관리를 철저히 해야 한다. 결핵 감염소를 다룰 때는 분비물 또는 가검물에 의해 감염될 수 있기 때문에 개인방역장비 - 방역복, 마스크, 비닐장갑, 비닐장화 - 를 착용한 상태에서 다루어야 한다. 특히, 결핵 감염소를 매몰 또는 소각하는 과정에서 결핵 감염소의 배설물 및 분비물 처리를 철저히 하여야 한다. 모든 작업을 마친 후에는 개인방역장비, 매몰 또는 소각에 사용하였던 장비 등을 청소 및 소독하고 필요시 소각 또는 매몰하여야 하며, 개인감염위험과 타인 감염위험을 방지하기 위해 노출부위를 세척하여야 한다.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.19-28
• /
• 2012

After the internet era, we are moving to the ubiquitous society. Nowadays the people are interested in the multimodal interaction technology, which enables audience to naturally interact with the computing environment at the exhibitions such as gallery, museum, and park. Also, there are other attempts to provide additional service based on the location information of the audience, or to improve and deploy interaction between subjects and audience by analyzing the using pattern of the people. In order to provide multimodal interaction service to the audience at the exhibition, it is important to distinguish the individuals and trace their location and route. For the location tracking on the outside, GPS is widely used nowadays. GPS is able to get the real time location of the subjects moving fast, so this is one of the important technologies in the field requiring location tracking service. However, as GPS uses the location tracking method using satellites, the service cannot be used on the inside, because it cannot catch the satellite signal. For this reason, the studies about inside location tracking are going on using very short range communication service such as ZigBee, UWB, RFID, as well as using mobile communication network and wireless lan service. However these technologies have shortcomings in that the audience needs to use additional sensor device and it becomes difficult and expensive as the density of the target area gets higher. In addition, the usual exhibition environment has many obstacles for the network, which makes the performance of the system to fall. Above all these things, the biggest problem is that the interaction method using the devices based on the old technologies cannot provide natural service to the users. Plus the system uses sensor recognition method, so multiple users should equip the devices. Therefore, there is the limitation in the number of the users that can use the system simultaneously. In order to make up for these shortcomings, in this study we suggest a technology that gets the exact location information of the users through the location mapping technology using Wi-Fi and 3d camera of the smartphones. We applied the signal amplitude of access point using wireless lan, to develop inside location tracking system with lower price. AP is cheaper than other devices used in other tracking techniques, and by installing the software to the user's mobile device it can be directly used as the tracking system device. We used the Microsoft Kinect sensor for the 3D Camera. Kinect is equippedwith the function discriminating the depth and human information inside the shooting area. Therefore it is appropriate to extract user's body, vector, and acceleration information with low price. We confirm the location of the audience using the cell ID obtained from the Wi-Fi signal. By using smartphones as the basic device for the location service, we solve the problems of additional tagging device and provide environment that multiple users can get the interaction service simultaneously. 3d cameras located at each cell areas get the exact location and status information of the users. The 3d cameras are connected to the Camera Client, calculate the mapping information aligned to each cells, get the exact information of the users, and get the status and pattern information of the audience. The location mapping technique of Camera Client decreases the error rate that occurs on the inside location service, increases accuracy of individual discrimination in the area through the individual discrimination based on body information, and establishes the foundation of the multimodal interaction technology at the exhibition. Calculated data and information enables the users to get the appropriate interaction service through the main server.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.69-76
• /
• 2013

The incidence of globally infectious and pathogenic diseases such as H1N1 (swine flu) and Avian Influenza (AI) has recently increased. An infectious disease is a pathogen-caused disease, which can be passed from the infected person to the susceptible host. Pathogens of infectious diseases, which are bacillus, spirochaeta, rickettsia, virus, fungus, and parasite, etc., cause various symptoms such as respiratory disease, gastrointestinal disease, liver disease, and acute febrile illness. They can be spread through various means such as food, water, insect, breathing and contact with other persons. Recently, most countries around the world use a mathematical model to predict and prepare for the spread of infectious diseases. In a modern society, however, infectious diseases are spread in a fast and complicated manner because of rapid development of transportation (both ground and underground). Therefore, we do not have enough time to predict the fast spreading and complicated infectious diseases. Therefore, new system, which can prevent the spread of infectious diseases by predicting its pathway, needs to be developed. In this study, to solve this kind of problem, an integrated monitoring system, which can track and predict the pathway of infectious diseases for its realtime monitoring and control, is developed. This system is implemented based on the conventional mathematical model called by 'Susceptible-Infectious-Recovered (SIR) Model.' The proposed model has characteristics that both inter- and intra-city modes of transportation to express interpersonal contact (i.e., migration flow) are considered. They include the means of transportation such as bus, train, car and airplane. Also, modified real data according to the geographical characteristics of Korea are employed to reflect realistic circumstances of possible disease spreading in Korea. We can predict where and when vaccination needs to be performed by parameters control in this model. The simulation includes several assumptions and scenarios. Using the data of Statistics Korea, five major cities, which are assumed to have the most population migration have been chosen; Seoul, Incheon (Incheon International Airport), Gangneung, Pyeongchang and Wonju. It was assumed that the cities were connected in one network, and infectious disease was spread through denoted transportation methods only. In terms of traffic volume, daily traffic volume was obtained from Korean Statistical Information Service (KOSIS). In addition, the population of each city was acquired from Statistics Korea. Moreover, data on H1N1 (swine flu) were provided by Korea Centers for Disease Control and Prevention, and air transport statistics were obtained from Aeronautical Information Portal System. As mentioned above, daily traffic volume, population statistics, H1N1 (swine flu) and air transport statistics data have been adjusted in consideration of the current conditions in Korea and several realistic assumptions and scenarios. Three scenarios (occurrence of H1N1 in Incheon International Airport, not-vaccinated in all cities and vaccinated in Seoul and Pyeongchang respectively) were simulated, and the number of days taken for the number of the infected to reach its peak and proportion of Infectious (I) were compared. According to the simulation, the number of days was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days when vaccination was not considered. In terms of the proportion of I, Seoul was the highest while Pyeongchang was the lowest. When they were vaccinated in Seoul, the number of days taken for the number of the infected to reach at its peak was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days. In terms of the proportion of I, Gangneung was the highest while Pyeongchang was the lowest. When they were vaccinated in Pyeongchang, the number of days was the fastest in Seoul with 37 days and the slowest in Pyeongchang with 43 days. In terms of the proportion of I, Gangneung was the highest while Pyeongchang was the lowest. Based on the results above, it has been confirmed that H1N1, upon the first occurrence, is proportionally spread by the traffic volume in each city. Because the infection pathway is different by the traffic volume in each city, therefore, it is possible to come up with a preventive measurement against infectious disease by tracking and predicting its pathway through the analysis of traffic volume.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.22-22
• /
• 2003

로티퍼는 해산어와 담수어뿐만 아니라 식용어와 관상어에 이르기까지 모든 어류의 인공 종묘 생산 과정에서 초기 먹이생물로 이용되고 있는 중요한 동물 플랑크톤이다. 그리고 로티퍼를 초기 자어의 첫 먹이로 사용하는 것을 시작으로 알테미아, 코페포다 또는 초미립자 사료 등을 사용하는 어류 인공종묘 생산 과정에서의 먹이계열이 확립되어 있다. 그러나, 사육하고자 하는 어종에 따라 초기 자어기에서 로티퍼를 섭이하는 시기와 사육 일령별 자어의 로티퍼 포식수를 알 수 있는 정확한 방법이 없다는 이유로 지금까지는 자어의 로티퍼 최초 포식 일령 및 로티퍼 포식수를 개개의 연구자들 나름대로의 방법으로 관찰하여 왔다. 일반적으로 자어가 로티퍼를 포식하였는지의 여부 및 포식수는 자어 소화기내에 존재하는 소화가 진행되기 전의 로티퍼 몸체의 수를 계수하는 방법으로 이루어졌다. 로티퍼의 체내에는 섬모환으로 모은 수중의 먹이 현탁액을 소화기계로 이동시키기 전에 먹이를 잘게 다지고 부수는 기능을 하는 저작기 (trophi)가 존재한다. 그리고 이 저작기는 로티퍼의 종에 따라서 다른 형태를 하고 있는 것으로 알려져 있다. 이 연구에서는 자어가 섭이한 로티퍼는 어류의 소화기내에서 소화가 진행되는 과정에서 로티퍼의 체 구조 중 저작기가 쉽게 소화되기 어렵고 소화기관의 연동 운동에 의해서도 쉽게 그 모양이 손상되지 않는다는 것을 발견하고 이 저작기의 수를 계수하므로서 로티퍼의 최초 섭이 일령 및 일령별 로티퍼 포식수를 계수할 수 있는 방법을 검토하였다. 그 결과, 소화기내의 잔존 로티퍼 몸체만으로 계수 관찰하던 기존 방법에 비교하여 로티퍼의 저작기를 계수하는 방법을 이용할 경우 보다 신뢰도가 높은 결과를 도출할 수 있음을 확인하였다. 경제적 가치의 우수성 때문만은 아니다. 미국은 자국의 대두 생산자들이 생산해 낸 대두를 판매하면서 조성한 자조금을 모아 대두의 생산성을 향상시키기 위한 연구 개발과 국내외 시장을 확대하기 위한 마케팅 활동에 쓰고 있다. 이런 자조 노력은 비단 미국의 대두 농민들에게만 국한된 것이 아니다. 가깝게는 일본의 수산업과 해산어 양식산업의 발전은 중앙 및 지방 정부, 수협과 같은 어민 조합 및 연근해 수산업 종사자들이 출연한 기금을 통해 이루어지고 있음을 지난 8월 북해도의 양식산업을 시찰했을 때 확인할 수 있었던 사실이다. 이제 우리나라도 국민소득 1만불 시대를 넘어 2만불 시대를 열기 위한 청사진을 그릴 만큼 모든 경제의 규모가 확대되었을 뿐 아니라 질적으로 고도화되었다. 우리에게 필요한 것은 성숙된 산업사회에 걸맞는 각 산업 주체들의 의식이다. 한국의 양식산업도 자조 정신을 갖추어 생산성 향상에 초점을 맞춘 양식기술의 개발, 환경 보전을 고려한 양식장 관리 및 소비를 확대하기 위한 유통시스템의 선진화에 스스로 투자를 해야 할 시기에 와 있다.치가 완전히 익은 15일 후에는 무첨가 김치, 0.1%, 0.2% 및 0.3% 고분자 키토산 김치의 젖산균 수는 5.4X107 cfu/g, 3.3X107 cfu/g, 8.6X106 cfu/g 및 2.6X106 cfu/g로 나타났다. 5. 발효가 진행 중에 대장균 군 수가 시간과 더불어 대장균군 수가 모든 구에 있어서 6일까지는 서서히 증가하다가 그 후부터는 대장균 군 수가 감소하였다. 즉, 발효초기에는 모든 구가 2.0X104∼4.0X105 cfu/g이었고, 6일 경에는 8.9X104∼4.5X105 cfu/g로 약간 증가하였으며 15일후에는 키토산 무첨가 김치가 2.0X