• Journal of radiological science and technology
• /
• v.26 no.4
• /
• pp.39-46
• /
• 2003

Digital radiographic systems based on solid-state detectors, commonly referred to as flat-panel detectors, are gaining popularity in clinical practice. Large area, flat panel solid state detectors are being investigated for digital radiography. The purpose of this work was to evaluate the active matrix flat panel digital x-ray detectors in terms of their modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE). In this paper, development and evaluation of a selenium-based flat-panel digital x-ray detector are described. The prototype detector has a pixel pitch of $139\;{\mu}m$ and a total active imaging area of $14{\times}8.5\;inch^2$, giving a total 3.9 million pixels. This detector include a x-ray imaging layer of amorphous selenium as a photoconductor which is evaporated in vacuum state on a TFT flat panel, to make signals in proportion to incident x-ray. The film thickness was about $500\;{\mu}m$. To evaluate the imaging performance of the digital radiography(DR) system developed in our group, sensitivity, linearity, the modulation transfer function(MTF), noise power spectrum (NPS) and detective quantum efficiency(DQE) of detector was measured. The measured sensitivity was $4.16{\times}10^6\;ehp/pixel{\cdot}mR$ at the bias field of $10\;V/{\mu}m$ : The beam condition was 41.9\;KeV. Measured MTF at 2.5\;lp/mm was 52%, and the DQE at 1.5\;lp/mm was 75%. And the excellent linearity was showed where the coefficient of determination ($r^2$) is 0.9693.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.283-293
• /
• 2002

Purpose : A PC based brachytherapy planning system was developed to display dose distributions on simulation images by 2D isodose curve including the dose profiles, dose-volume histogram and 30 dose distributions. Materials and Methods : Brachytherapy dose planning software was developed especially for the Ir-192 source, which had been developed by KAERI as a substitute for the Co-60 source. The dose computation was achieved by searching for a pre-computed dose matrix which was tabulated as a function of radial and axial distance from a source. In the computation process, the effects of the tissue scattering correction factor and anisotropic dose distributions were included. The computed dose distributions were displayed in 2D film image including the profile dose, 3D isodose curves with wire frame forms and dosevolume histogram. Results : The brachytherapy dose plan was initiated by obtaining source positions on the principal plane of the source axis. The dose distributions in tissue were computed on a $200\times200\;(mm^2)$ plane on which the source axis was located at the center of the plane. The point doses along the longitudinal axis of the source were $4.5\~9.0\%$ smaller than those on the radial axis of the plane, due to the anisotropy created by the cylindrical shape of the source. When compared to manual calculation, the point doses showed $1\~5\%$ discrepancies from the benchmarking plan. The 2D dose distributions of different planes were matched to the same administered isodose level in order to analyze the shape of the optimized dose level. The accumulated dose-volume histogram, displayed as a function of the percentage volume of administered minimum dose level, was used to guide the volume analysis. Conclusion : This study evaluated the developed computerized dose planning system of brachytherapy. The dose distribution was displayed on the coronal, sagittal and axial planes with the dose histogram. The accumulated DVH and 3D dose distributions provided by the developed system may be useful tools for dose analysis in comparison with orthogonal dose planning.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2019

Pintail (Anas acuta) is the major wintering bird in South Korea and known as a major mediator of the highly pathogenic avian influenza (HPAI). Pintail migrates long distances between Russian Siberia and Korea. This species prefers a rice paddy area as their winter habitat. The purpose of this study is to provide the data necessary for the conservation and management of bird habitats in Korea by understanding the wintering home-range and habitat of pintail in Korea. We captured six pintails using a cannon-net in the winter of 2015 and attached the GPS-mobile phone based telemetry (WT-300) on them to study the wintering home-range and wintering habitat. We analyzed the tracking location data using ArcGIS 9.0 Animal Movement Extension and calculated Kernel Density Estimation (KDE) and Minimum Convex Polygon (MCP). The average home-range in the wintering ground analyzed by MCP was $677.3km^2$ (SD=130.2, n=6) while the maximum and minimum were $847.7km^2$ and $467.5km^2$, respectively. Extents of home-range analyzed by KDE were $194.7km^2$ (KDE 90%), $77.4km^2$ (KDE 70%), and $35.3km^2$ (KDE 50%). The pintails mostly used both sea and paddy field as habitat in the winter season and utilized paddy fields more during the nighttime and than the daytime. We concluded that the home-range and habitat of pintails in the winter could be used as the reference data for the preservation of species, management of habitats, and coping with a breakout of HPAI.

• Communications of Mathematical Education
• /
• v.35 no.2
• /
• pp.173-191
• /
• 2021

This study noted that a survey of teachers in a leading study conducted in Korea during the Pandemics period pointed out that the "real-time interactive" classes account for a significantly small portion of the remote class format. Contentually, the study reported cases of developing and applying "real-time interactive" class materials based on "planar decision requirements" of high school mathematics subject geometry. The teacher who participated in the development was a math teacher who worked at a Seoul-based high school with 28 years of high school teaching experience, and a teacher who was in charge of geometry in the math department in 2020. The development teacher decided to develop real-time interactive classes. In particular, the materials were developed by organizing the class guidance plan in four stages: 'Meeting and Class Guidance', 'Giving motivation', 'Suggesting tasks', 'Individual Investigative Activities and Teacher Feedback' and 'Reflection and Evaluation' which were selected through the process of selecting the class contents and selecting online class tools. At this time, the development teacher produced and presented about five minutes of video material using the videooscribe, a whiteboard animation program. And in case of task number 8, it consisted of recording the students' free thoughts after class, which served as a role of assessment by students themselves and providing feedback to their teachers. This study is a case study that introduces a series of courses in which field teachers develop class materials, and in addition to presenting class materials that can be applied directly to classes, is a result of a study that focuses on the role of presenting samples for future class data development. The materials developed were verified as class materials based on the opinions of the students who participated in the class and the results of the evaluation commissioned by the three math teachers.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.188-197
• /
• 2020

Termites play an important role as decomposers of the forest ecosystem, while simultaneously causing enormous damage to wooden structures. Currently, two species of subterranean termites have been reported in Korea, and termite damage to historical wooden buildings is occurring nationwide due to climate change, forest fertility, and the locational characteristics of historical wooden buildings. Subterranean termites make their nests underground or inside timber. Termites move underground and access wooden structures through the lower parts of the buildings, adjacent to the ground. Once termites attack the wooden structures, it not only spoils the authenticity of cultural heritage structure, but also hampers structural stability due to the decrease in the strength of the material. Therefore, it is important to prevent termite damage before it occurs. Chemical treatments are mainly used in Korea to control and prevent the damage. In foreign countries, physical barriers are also used to prevent entry to wooden buildings, along with chemical treatments. Physical barriers involve installing nets or particles that termites cannot pass through in the lower part of the building, around the pipes, and between the edges of the building or exterior walls and interior materials. Advantages of a physical barrier are that it is an eco-friendly method, maintains long-term effect after installation, and does not require the use of chemical treatments. Prior to applying physical barriers, studies into the characteristics of termite species must be undertaken. In this study, we evaluated the minimum passage size that each caste of Reticulitermes speratus kyushuensis can move through. We found that workers, soldiers, and secondary reproductive termites were able to pass through diameters of 0.7mm, 0.9mm, and 1.1mm respectively. Head height of termites was an important factor in determining the minimum passing size. Results from the current study will be used as a basis to design the mesh size for physical barriers to prevent damage by termites in historical wooden buildings in Korea.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.347-355
• /
• 2022

The safety valve (PSV) is a safety device that automatically releases a spring when the pressure generated by various causes reaches the set pressure, and is restored to a normal state when the pressure falls below a certain level. Periodic inspection and monitoring of safety valves are essential so that they can operate normally in abnormal conditions such as pressure rise. However, as the current safety inspection is performed only at a set period, it is difficult to ensure the safety of normal operation. Therefore, evaluation items were developed by finding failure modes and causative factors of safety valves required for safety management. In addition, it is intended to provide decision-making information for securing safety by deriving the priority of items. To this end, a Delphi survey was conducted three times to derive evaluation factors that were judged to be important in relation to the Failure Mode Cause Factor (FMCFs) of the safety valve (PSV) targeting 15 experts. As a result, 6 failure modes of the safety valve and 22 evaluation factors of its sub-factors were selected. In order to analyze the priorities of the evaluation factors selected in this way, the hierarchical structure was schematized, and the hierarchical decision-making method (AHP) was applied to the priority calculation. As a result of the analysis, the failure mode priorities of FMCFs were 'Leakage' (0.226), 'Fail to open' (0.201), 'Fail to relieve req'd capacity' (0.152), 'Open above set pressure' (0.149), 'Spuriously' 'open' (0.146) and 'Stuck open' (0.127) were confirmed in the order. The lower priority of FMCFs is 'PSV component rupture' (0.109), 'Fail to PSV size calculation' (0.068), 'PSV Spring aging' (0.065), 'Erratic opening' (0.059), 'Damage caused by improper installation and handling' (0.058), 'Fail to spring' (0.053), etc. were checked in the order. It is expected that through efficient management of FMCFs that have been prioritized, it will be possible to identify vulnerabilities of safety valves and contribute to improving safety.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.429-438
• /
• 2022

This study evaluated the effect of the degree of weathering on the particle size distribution and the amount of fine particles generated in the aggregate production process during the crushing of igneous rock. Rock samples were collected from three areas with differences in strength from the Schmith hammer measurement at the aggregate quarry in Geochang, Gyeongsangbuk-do. After crushing with a jaw crusher under the same conditions in laboratory, particle size analysis, mineral analysis, chemical analysis, and weathering index were calculated. The Schmidt hammer measurements were 56, 28, and <10, and the CIA and CIW values of weathering index were also different, so the rock samples were classified into hard rock, soft rock, and weathered rock according to the weathering degree. It shows a smaller particle size distribution toward weathered rocks under the microscope, and the proportion of altered clay minerals such as sericite increased. The composition of feldspar and quartz was high for hard rock, and the ratio of muscovite and kaolinite was low. As a result of the crushing of the jaw crusher, hard rock produced a lot of coarse crushed material (13.2mm), while soft rock and weathered rock produced fine crushed material (4.75mm). The former showed the characteristics of the beta distribution curve, and the latter showed the bimodal distribution curve. The production of fine rock particles (based on 0.71mm of sieve, wt. %) increased to 13%<21%<22% in hard rock, soft rock, and weathered rock, and the greater the degree of weathering, the more fine rock particles were generated. The fine particles are recovered by the operation of the sand unit in the wet aggregate production process. Therefore, in order to minimize the amount of sludge generated in the aggregate production process, it was judged that a study on the optimal operation of cyclones could be necessary.

• The Korean Society of Law and Medicine
• /
• v.24 no.1
• /
• pp.3-42
• /
• 2023

The Supreme Court en banc decision on December 12, 2022 (docket number 2016Do21314) ruled that the diagnosis of endometrial hyperplasia by an oriental medical doctor using a diagnostic ultrasound device was not an unlicensed medical practice for an oriental medical doctor, which shall be scrutinized by the article 27 (1) of the Korean Medical Service Act. This ruling did not determine that a specific medical practice, especially diagnosis, based on the radiology, which is a part of western medicine, was not an unlicensed medical practice for an oriental medical doctor. Rather, it intended to clarify that the prosecutor should specify and prove the way of diagnosis and he should not prosecute mere the use of a diagnostic ultrasound device itself. To that extent, the ruling is agreeable because, as the oriental medicine community has argued, there is no regulation prohibiting the use of certain devices. It is probable, however, that the way of diagnosis established in radiology, which is a part of western medicine, was actually used in the case. In that case, there is undeniably an unlicensed medical practice for an oriental medical doctor. While many of the cases where the demarcation between (western) medicine and oriental medicine have been problematized thus far have been experimental treatment in nature, the above practice of using ultrasound appears to be frequently done in many oriental clinics, and so it is necessary to cope with the possibility of a disguised unlicensed medical practice. Another problem is the prevention of unfair practice or the protection of medical consumers. In fact, many oriental medical clinics' practice appear to have a tendency of inducing medical consumers' misunderstanding that a diagnosis based on radiology, which is a part of western medicine, were provided. It is hard to respond to this problem with demarcation between (western) medicine and oriental medicine. A new regulation against unfair practice might be necessary to implement.

• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.123-155
• /
• 2011

This study aims to closely read Kim Jong-il's "About Stage Drama Arts" and disclose the new reality as evaluated by him. The study took the method by which to compare Kim Jong-il's theory on drama and North Korea's drama theory in the 1950s, and the findings of this study revealed that it was irrational to grant the adjective "new" to Kim Jong-il's drama theory. This is because tradition inheritance and newness cross each other. First, his tradition inheritance aspect was found in his playwriting method. In playwriting method, Kim Jong-il's argument about characters and language is an extension of the 1950s drama theory, and his theory on JongZa(seeds) is the transformation of the concept proposed in the 1950s. Also, the expression means of dramas and drama arts is dialogue, and his guideline to focus on the art of conversation rather than on acting is interpreted to be a reduced concept of drama arts, compared with the 1950s drama theory. On the other hand, his newness aspect can be clearly discovered in the materialization of stage. The fixed stage background, without dark change, shifts to another situation as it is, and this stage setting is clearly distinguished from the previous stage setting. The attempt is worth highly evaluating to allow the stage to reflect actors' emotional flows and let them act. Also, the attempt is distinctively distinguished from previous drama theories to allow the chorus' positive involvement in dramas so as to directly deliver characters' emotions to the audience and to trigger the audience' response as intended by creators. From the perspectives of drama evaluation, Kim Jong-il's theory and practice regarding stage and music is understood to maximize the audio-visual effects. Therefore, Kim Jeong-il's drama theory, as he argues, is not a completely new theory, but a transformational inheritance of existing drama theories, and a creation theory with focus on expansion of spectacles.