• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.245-252
• /
• 1996

본 연구는 화강암 폐재의 재활용을 목적으로 한 기초적인 연구로서, 분말형태의 화강암폐재를 Ca(OH2)와 혼합하여 수열 hot press 법에 의해 고화시켰다. 아울러 고화체의 기계적 성질을 평가하였으며, 미시적 조직구조의 변화 및 파괴거동을 파악하기 위해 음향방출실험을 실시하였다. 고화체의 기계적 성질은 수열온도의 의존성이 있었으며, 28$0^{\circ}C$에서 최대강도를 보였다. 또한 고화체의 파면은 수열온도에 따라 현저히 다른 양상을 보였으며, 수열실험동안 다양한 화합물이 생성되었다. 그 중에서 cyclowollastonite, tobermorite 및 rankinite 등은 강도를 향상시키는 주된 화합물이었고, crossite 및 xonotlite 등은 강도의 저하를 초래하였다. 한편, 기공이 많이 존재할수록 AE counts는 더많이 발생하였으며, 최대하중에서 AE counts는 최대치를 보였고, 강도가 증가함에 따라 AE신호는 보다 많이 방출되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3C
• /
• pp.115-125
• /
• 2009

The preconsolidation pressure has been commonly determined by oedometer test. However, it can also be determined by insitu test, such as piezocone test with theoretical and(or) empirical correlations. Recently, Neural Network (NN) theory was applied and some models were proposed to estimate the preconsolidation pressure or OCR. It was already found that NN model can come over the site dependency and prediction accuracy is greatly improved when compared with present theoretical and empirical models. However, since the optimization process of synaptic weights of NN model is dependent on the initial synaptic weights, NN models which are trained with different initial weights can't avoid the variability on prediction result for new database even though they have same structure and use same transfer function. In this study, Committee Neural Network (CNN) model is proposed to improve the initial weight dependency of multi-layered neural network model on the prediction of preconsolidation pressure of soft clay from piezocone test result. Prediction results of CNN model are compared with those of conventional empirical and theoretical models and multi-layered neural network model, which has the optimized structure. It was found that even though the NN model has the optimized structure for given training data set, it still has the initial weight dependency, while the proposed CNN model can improve the initial weight dependency of the NN model and provide a consistent and precise inference result than existing NN models.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.453-461
• /
• 2002

This study investigated the fatigue stength of non-load carrying cruciform welded joints, which was maunfactured using the SM570 and POSTEN80 high strengh steel. Factors such as fatigue strength, fatigue crack initiation and propagation, thickness effect, and the relatioinship between the static strength and the fatigue strength were examined and compared with previous fatigue testing results. Results showed that the fatigue strength of SM570 and POSTEN80 steel are higher than the grade represented on the design specification. It is also identified the size effect and the dependence of the static stength in a few cases.

• The Magazine of the IEIE
• /
• v.29 no.11
• /
• pp.1369-1377
• /
• 2002

항공기 운용기술이 점차 항공전자 부품에 의존하는 수준이 높아지고 있으며 항공전자부품은 저전력 소모의 기술로 변천하여 외부의 전자장 환경에 취약성이 증대되고 있다. 또한 항공기 기체구조를 형성하는 부분도 일정부분 알루미늄에서 복합소재로 대체됨에 따라 외부 전자장 환경에 취약성 요인이 되고 있다. 따라서 고강도 전자장 환경에서 항공기의 지속적인 안전 비행과 착륙에 대한 대책이 요구되고 있다. 이러한 기술의 변모에 따라 고강도 전자장 환경에 대비한 감항기준이 제정되고 있으며 이에 따른 감항인증 절차도 제정이 되고 있다. 개발 항공기는 항공기의 제작 수준에 맞는 인증 절차를 밟아야 하며 이러한 인증의 수행은 항공기 개발 경험과 신기술에 맞는 인증절차의 개발이 병행되어야 한다.

• Tunnel and Underground Space
• /
• v.14 no.3
• /
• pp.167-174
• /
• 2004

This paper is to introduce an article published in Rock Mechanics and Rock Engineering, 2003. In this research, a fracture mechanics model is developed to illustrate the importance of time-dependence far brittle fractured rock. In particular a model is developed fer the time-dependent degradation of rock joint cohesion. Degradation of joint cohesion is modeled as the time-dependent breaking of intact patches or rock bridges along the joint surface. A fracture mechanics model is developed utilizing subcritical crack growth, which results in a closed-form solution for joint cohesion as a function of time. As an example, a rock block containing rock bridges subjected to plane sliding is analyzed. The cohesion is found to continually decrease, at first slowly and then more rapidly. At a particular value of time the cohesion reduces to value that results in slope instability. A second example is given where variations in some of the material parameters are assumed. A probabilistic slope analysis is conducted, and the probability of failure as a function of time is predicted. The probability of failure is found to increase with time, from an initial value of 5% to a value at 100 years of over 40%. These examples show the importance of being able to predict the time-dependent behavior of a rock mass containing discontinuities, even for relatively short-term rock structures.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.95-98
• /
• 1998

완화형 강유전체인 0.9MPb*Mg$_{1}$3/Nb$_{2}$3/)O$_{3}$-0.1PbTiO$_{3}$에서 강유전-상유전 상전이에 수반되는 relaxation거동을 살펴보기위해 낮은 전계에서 측정된 유전특성과 높은 전계에서 측정된 전계유기 분극 거동 등을 조사하였다. -50-9$0^{\circ}C$의 상전이 온도범위에 걸쳐 1V/mm의 낮은 전계에서 측정된 유전특성의 온도의존성을 구하고 수 kVmm의 강전계하에서 발생된 분극의 온도의존성을 관찰하였다. 이 모든 결과들은 Vogel-Fulcher관계식에 비교적 정확하게 일치되었으며 그 결과 T$_{f}$ 는 294.6˚K로 나타났다. 본 연구결과를 통하여 Vogel-Fulcher관계식에 의한 주파수 의존성은 낮은 전계하에서의 유전특성 뿐 아니라 강전계하에서의 여러물성들도 동일하게 적용되는 것을 확인할 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.177-183
• /
• 2008

The typical heat-resisting rotor steels such as 2.25CrMo, 9CrMo and 12CrW steel were experimentally studied in order to understand their materials degradation under high temperature and pressure during the long-term service, and then use the basic studies for the structural health monitoring. In order to monitor the materials degradation, it was conducted by the isothermal aging for 2.25CrMo steel, creep-fatigue for 9CrMo steel and creep for 12Cr steel with the incremental step test. The ultrasonic wave properties, electrical resistivity and coercivity were interpreted in relation to microstructural changes at each material and showed strong sensitivity to the specific microstructural evolution.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.410-414
• /
• 1998

The dependence of substrate material and electrode position were studied by radiation analysis of Ar discharge, and electron beam radiation was applied to confirm the crosslinked structure of the film. Comparing the conductor substrate with the insulator substrate, the former had lager peak density of radiation spectrum than latter. From the result of peak density of metastable state and ion, it was confirmed that the peak density of ion was falling to the down limit with increasing the distance of electrode by analyzing the radiation spectrum of polymerized films. When the polymerized styrene films was exposed to electron beam, it was possible to form a pattern with the insulator substrate.

• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.339-345
• /
• 2012

Information on the deformation behavior and fracture strength of rocks subjected to dynamic loadings is important to stability analyses of underground openings underground vibration due to rock blasts, earthquakes and rock bursts. In this study, Split Hopkinson Pressure Bar (SHPB) system was applied to estimate dynamic compressive and tensile fracture strengths of limestone and also examine deformation behavior of limestones under dynamic loadings. A micro-focus X-ray CT scanner was used to observe non-destructively inside the impacted limestone specimens. From the dynamic tests, it was revealed that the limestone have over 140MPa dynamic compressive strength and the strain-rate dependency of the strength. Dynamic Brazilian tensile strength of the limestone exceeds 21MPa and shows over 3 times static Brazilian tensile strength.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1990

We studied two-photon-resonant three-photon ionization processes via 4D[channel #1] and 5S(channel #2] intermediate state of Na atom in a quartz ionization cell. For each channel. the bandwidth of ionization spectrum increased linearly with laser intensity and the ionization signal followed J3 dependence at low intensity. Compared with channel # 1 . ionization signal of channel #2 was enhanced by a factor of 20 - 25. The measured AC Stark shift factor of 3S - 4I) transition was $174\pm60MHz/MW/textrm{cm}^2$..