• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.61-69
• /
• 2016

Since 2000, the market of convenient stores in Korea has developed rapidly due to the explosive growth in single households but it still consists mainly of manual work due to the nature of the domestic industry. Hence the explosive increase in demand in the market is mostly due to workers. Therefore, the research aimed at encouraging efficiency via automation, which is carried out in manufacturing, such as electronic, cars and so on, is inadequate. This study performed a feasibility analysis of investment for introducing an automated system on brand A, which is domestic famous convenience store company. Productivity growth according to the introduction of an automated guided vehicle and the cost-benefits was studied with using a simulation for the picking process, which is most personnel and time consuming. As a result, the simulation showed that the equipment AGV introduced for choosing the process has the effects of cost saving and increased time efficiency for performing manual labor. Furthermore, appropriate numbers of AGV were forecasted considering the capacity of the distribution Center in the brand A convenient store, which has been growing steadily. There are increasing numbers of worker labor costs in the distribution industry these days. Before building a large new automate center, it is expected to provide a good information to investors who are considering increasing productivity through partial automation of each of unit process to achieve some cost reduction.

• Archives of design research
• /
• v.13 no.3
• /
• pp.123-134
• /
• 2000

Electronic commerce in digital environment is greatly different from the commerce in physical environment in the past (reality environment) in terms of marketing, distribution structure and, above an, comsumers'purchase pattern. The Old purchase pattern is that a consumer buys a product after s/he touches, tests, and feels it physically, while the purchase pattern in electronic commerce enables the comsumer to make a decision about whether to buy it or not through the information gleaned from the computer monitor screen. A number of products which appears in the market now are designed to use the reality environment setup without consideration of the digital environment, of which the intention is to appeal to consumers with a series of design process. However, taking under consideration the present situation in which lots of electronic commerce are made in the cyber space or digital environment, we are required to forward the product design which can gains the positive attraction for consumers in this environment. Factor analysis is made in order to understand how the subjects perceive the image of the design of the product both in reality situation and in digital environment. The result shows the first factor has different images in those environments. In the background of this conclusion rests the fact that the difference of the transfer of formative factors to consumers is made in the images which show themselves in those different environments.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.278-283
• /
• 2017

Purpose: The aim of this study was to evaluate the interdental distances of anterior, premolar, and molar teeth at the cementoenamel junction (CEJ) and 2 mm below the CEJ in healthy natural dentition with cone-beam computerized tomography (cone-beam CT) in order to provide valuable data for ideal implant positioning relative to mesiodistal bone dimensions. Materials and Methods: Two hundred patients who visited Dental Hospital, Wonkwang University, who had natural dentition with healthy interdental papillae, and who underwent cone-beam CT were selected. The cone-beam CT images were converted to digital imaging and communication in medicine (DICOM) files and reconstructed in three-dimensional images. To standardize the cone-beam CT images, head reorientation was performed. All of the measurements were determined on the reconstructed panoramic images by three professionally trained dentists. Results: At the CEJ, the mean maxillary interdental distances were 1.84 mm (anterior teeth), 2.07 mm (premolar), and 2.08 mm (molar), and the mean mandibular interproximal distances were 1.55 mm (anterior teeth), 2.20 mm (premolar), and 2.36 mm (molar). At 2mm below the CEJ, the mean maxillary interdental distances were 2.19 mm (anterior teeth), 2.51 mm (premolar), and 2.60 mm (molar), and the mean mandibular interproximal distances were 1.86 mm (anterior teeth), 2.53 mm (premolar), and 3.01 mm (molar). Conclusion: The interdental distances in the natural dentition were larger at the posterior teeth than at the anterior teeth and also at 2 mm below the CEJ level compared with at the CEJ level. The distances between mandibular incisors were the narrowest and the distances between mandibular molars were the widest in the entire dentition.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.372-382
• /
• 1992

Recreation planning is essential activity to meet changing demands and to protect the resources. The recreation opportunity specturm(ROS) system is a principal part of a recreational management planning. In this study, the basic concepts and tenets of the ROS system described and reviewed the feasibility of applying to forest recreation planning to the Korean national forest. In Korea, the forest land as a major recreation place has used without the rational planning process. The control for the laissez-faire use on the forest area, the classification of recreational opportunity settings is the most important process and then it make a useful tool for providing proper recreational opportunity and site development guidance. Opportunity settings classification can help maintain diversity and enhance protection of forest resources. It can also improve the quality of recreational experiences and the management action guidances. GIS technology using the ARC/INFO could be useful in current attempts to identify analysis areas for predictive modeling of forest recreation site planning.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.101-115
• /
• 2005

IT companies make a lot of effort to share and utilize the experiences of their members and transform them into organizational knowledge as a competitive core. However they face a dilemma in that they have to spend time and financial resources to perform activities around knowledge management for the long-term gains, while carrying at field-work for making short-term profits. As an initial attempt to tackle this managerial problem, this paper tries to investigate the mechanism of knowledge management in a small IT company in Korea with a synthetic view-point using system dynamics simulation model. It depicts the dynamic behaviors of knowledge management and presents some findings of political leverage. Although this model has to be further replenished, the scheme for the dynamism of knowledge management and the findings presented in the paper could be useful for the decision makers, especially of knowledge-intensive organizations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.880-884
• /
• 2009

여름철 강우시 저수지로 유입하는 고탁도의 하천수는 저수지 주변 수체에 비해 낮은 수온과 높은 부유물질 농도(SS)로 인해 상대적으로 높은 밀도를 가지며, 저수지 내에서 동일 밀도층을 따라 분포하며 밀도류를 형성하게 된다. 탁수는 대부분 장기간 저수지에 체류하며 수질과 수생태계에 큰 영향을 주게 된다. 따라서 저수지로 유입한 탁수의 밀도류 거동특성을 파악하는 것은 저수지 운영, 수질관리 및 수생태계 보호를 위한 관리대책 수립에 있어서 중요한 요소이다. 본 연구의 목적은 횡방향 평균 2차원 수치모델을 이용하여 초기수위별 다양한 유량규모에서 소양호로 유입하는 밀도류의 거동특성(유입경계지점 수심($h_0$), 침강점 수심($d_p$)과 거리($X_p$), 분리점 수심($d_s$), 중층류 관입두께($h_i$), 댐 축 도달시간($t_a$), 희석율(${\beta}$))을 분석하여 저수지 수질관리를 위한 의사결정지원 기초정보를 제공하는데 있다. 밀도류의 거동분석을 위해 사용된 유량조건은 그동안 소양호에서 발생한 홍수크기를 바탕으로 7개의 등급으로 나누었으며, 각각의 유량조건별 수문곡선은 2007년 수문사상 중 7월 30일부터 8월 30일까지의 수문사상을 바탕으로 수정가우시안 공식을 사용하여 산정하였다. 탁수 거동 특성의 모의는 서로 다른 초기 수위 및 유량조건하에서의 탁수거동을 나타냈고, SS농도 25 mg/L 이상을 기준으로 하여 탁수층의 $d_p$, $X_p$, $d_s$, $h_i$, $t_a$, ${\beta}$를 산정하였다. 일반적으로 유량규모가 커질수록 $d_p$와 $d_s$는 증가하였고, $X_p$는 댐 축으로부터 가까워짐이 확인되었으나, 동일 유량규모에 대해 초기 수위가 증가함에 따라 $X_p$는 대체로 댐으로부터 멀어졌다. $h_i$는 유량규모가 증가함에 따라 완만하게 증가하는 경향을 보였고, $t_a$는 초기수위가 EL. 165 m일 때 유량이 2,000 CMS 미만인 경우 댐 앞까지 도달하지 못하는 것으로 나타났으며, 나머지 수위조건에서는 유량이 3,000 CMS 미만인 경우 댐 앞까지 도달하지 못하는 것으로 나타났다. 유량 규모에 따라 $X_p$가 0 km인 지점과 19 km인 지점에서의 ${\beta}$ 값을 산정한 결과 일반적으로 유량규모가 커질수록 유입수의 희석효과는 작아지며 초기수위가 커질수록 증가하는 경향을 나타냈다. 연구 결과는 탁수 발생 초기 저수지 운영 실무자들이 유량규모 및 초기 수위조건에 따른 밀도류의 거동특성을 신속히 예측하는 목적으로 사용될 수 있다.

• The Korean Journal of Financial Management
• /
• v.23 no.2
• /
• pp.27-56
• /
• 2006

This paper analyzes whether corporations which have done capital reduction fulfill the objectives of their capital reduction as planned and also asks how did the capital reduced corporations fare in terms of stock returns, by investigating the capital reduced corporations on the Exchange and the Kosdaq between 2000 and 2004. Most capital reduced companies aim to improve their capital structure. Debt to Equity ratio among financial ratios has improved significantly after capital reduction, yet the profitability of corporations wasn't up to expectations. The analysis of cumulative abnormal returns (CARs) indicates that the CARs were below '0' during whole investigation period. Besides, the CARs of companies listed on the Kosdaq have plummeted to -53.5%. Half of the companies on the Kosdaq in this sample which have reduced their capital to avoid delisting have been eventually delisted after capital reduction. This Study concludes that simple capital reduction without having value-added projects is not beneficial to shareholders.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.27-33
• /
• 2018

This study was performed to review the domestic and international smart farm service model based on the convergence of agriculture and information & communication technology and derived various factors needed to improve the Korean smart greenhouse. Studies on modelling of crop growth environment in domestic smart farms were limited. And it took a lot of time to build research infrastructure. The cloud-based research platform as an alternative is needed. This platform can provide an infrastructure for comprehensive data storage and analysis as it manages the growth model of cloud-based integrated data, growth environment model, actuators control model, and farm management as well as knowledge-based expert systems and farm dashboard. Therefore, the cloud-based research platform can be applied as to quantify the relationships among various factors, such as the growth environment of crops, productivity, and actuators control. In addition, it will enable researchers to analyze quantitatively the growth environment model of crops, plants, and growth by utilizing big data, machine learning, and artificial intelligences.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.417-430
• /
• 2018

Identification and mangement of ecosystem service hotspots are necessary to set environmental policies that include concepts of ecosystem service. Assessment and mapping of ecosystem service hotspot referring areas with high amount of ecosystem services provide essential information to manage ecosystem services effectively. Assessment of hotspots based on regional environmental stakeholders' perception is an useful approach to identify priority areas where management practices are required. This study estimated weights on regulating ecosystem services from regional environmental stakeholders' surveys in Ansan, and then, identified regulating service hotspots with weights. The result indicated that regulating services are, in order of importance, water quality, air quality, erosion, and climate control. The north-eastern forest of Ansan was mainly revealed as an ecosystem service hotspot. Ecosystem service hotspots were spatially distributed similarly regardless of environmental stakeholders' weights. Identification of ecosystem service hotspot with environmental stakeholders' perception can be applied in decision-support tools for ecosystem service management.

• Journal of Service Research and Studies
• /
• v.3 no.2
• /
• pp.53-60
• /
• 2013

Datamining from the large data in the form of various techniques for obtaining information have been developed. In recent years one of the most sought areas of pattern recognition and machine learning method is created with most of existing learning algorithms based on categorical attributes to a rule or decision model. However, the real-world data, it may consist of numeric attributes in many cases. In addition it contains attributes with numerical values to the normal categorical attribute. In this case, therefore, it is required processes in order to use the data to learn an appropriate value for the type attribute. In this paper, the domain of the numeric attributes are divided into several segments using learning algorithm techniques of discritization. It is described Clustering with other data mining techniques. Large amount of first cluster with characteristics is similar records from the database into smaller groups that split multiple given finite patterns in the pattern space. It is close to each other of a set of patterns that together make up a bunch. Among the set without specifying a particular category in a given data by extracting a pattern. It will be described similar grouping of data clustering technique to classify the data.