• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.33-42
• /
• 2018

The Patient Safety Act was enacted on July 26, 2016. Patient safety law is a method to prevent harm by collecting and accumulating various errors through the reporting system. Therefore, in order for this law to be successfully implemented, it is necessary to vitalize 'the autonomous reporting and reporting learning system of patient safety accidents'. And In order for this system to be activated, a large amount of reporting data accumulation is a prerequisite. Nevertheless, there were only two reports in about 17 months. In this paper, I will criticize the validity of the current autonomous reporting system and the two proposed amendments, I would like to propose the introduction of a partial obligation reporting system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.110-124
• /
• 2019

In recent years, over-supply of hospitals has made hospital management more difficult and hospitals have introduced innovative hospital management to enhance customer satisfaction. The purpose of this study is to investigate the effect of innovativeness of hospitals on customer satisfaction by using mediating effects of hospital capacity and location strategy. The subjects of this study were selected from 120 patients and caregivers who were hospitalized in Seoul and Metropolitan area hospitals and conducted questionnaire and statistical analysis. The results of this study are as follows: Firstly, this paper shows hospital Innovativeness does not significantly affect customer satisfaction. Unlike private companies, it is urgent to develop innovativeness measuring tools that are unique to hospitals differentiated from those of general companies. Secondly, although the impact of Innovativeness on hospital internal competency and location strategy was similar, location strategy(${\beta}=0.357$) had a greater impact on customer satisfaction than internal competency(${\beta}=0.283$). This suggests that the medical institution should take precedence over the detailed preparations based on its location marketability, traffic infrastructure, building sales and medical concentration from the time of its opening. Thirdly, this paper confirms through empirical analysis that the relationship between hospital Innovativeness and customer satisfaction is completely mediated by internal capacity and location strategy. The hospital's Innovativeness is affecting customer satisfaction by enhancing the hospital's internal competencies and inducing an active attitude toward establishing a location strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1222-1232
• /
• 2011

RFID/USN core technologies for ubiquitous computing, It is possible to use variety of sensors, direct processors, and wireless network technology that easily collect the actual physical environment and can monitor information remotely. Especially the healthcare industry and services combined with U-Healthcare that have international competitiveness in the medical field. But the USN, standard management system of RFID such as EPCglobal architecture framework, the lack of interoperability issues and the global sensor network implementation. In this paper, a system for managing sensor nodes of the USN, USN of SIP-based management system (UMS) is proposed. UMS support Session Initiation Protocol (SIP), provide session management and mobility capabilities, that is based on Internet standard protocol. UMS architecture of the existing SIP architecture, added USN User Agent (UUA) and the USN Name Server (UNS) that the location of sensor nodes should be possible to trace. UUA on behalf of the limited capacity of the location of the sensor nodes to perform the registration process, UNS to track the location of the sensor nodes to provide name resolution services. The proposed management system has the advantage of internet applications such as Web services interoperability and easy to recycle existing resources with other SIP-based because it uses the Internet standard protocol SIP. In this paper we propose is based on the UMS blood temperature management system is verified through the scenario.

• Journal of the Economic Geographical Society of Korea
• /
• v.6 no.1
• /
• pp.21-44
• /
• 2003

It is the Third Italy's industrial districts that is emerging as effective strategies for regional economic development since 1970' s. Compared with mass production system, it's production system is characterized the cooperative networks of a number of enterprise specialized in specific sector or process. This work will analysis the course of growth and industrial characteristics of Modena engineering industrial district and Mirandola bio-industrial district as the exemplary industrial district, so elucidate new principle of building industrial space named development of industrial districts. This work point out three characteristics which these industrial districts have. First, these districts have the production system based vertical dis-integration and specialization among enterprise like general industrial districts in Third Italy. This factor make Modena and Mirandola's production system coupled with specialized enterprise in coping with various demand of consumer. Second, technological innovation is very important factor in growing industrial districts. This factor contributes these two districts to have developed as the competitive industrial clusters in the world. Last point is the difference of local governance by the two city governments. Modena city government has made a lot of industrial spaces but in Mirandola the leading enterprise has contributed to shape the industrial district.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.345-345
• /
• 2012

최근 의료산업에서는 고해상도 및 동영상 구현이 가능한 직접 방식의 X-선 검측센서에서 X-ray 흡수효율이 좋은 반도체 센서(CdTe, CdZnTe 등)와 성숙된 기술, 집적효율이 뛰어난 CMOS 공정을 이용한 제품을 출시하여 대면적화 및 고집적화가 가능하게 되어 응용분야가 점차 확대되고 있는 추세이다. 하지만 이 역시 고 성능의 X-선 동영상 구현을 위해서는 고 해상도 문제, 검출효율 문제, 대면적화의 어려움이 있다. 기존의 X-선 광 도전층의 증착은 증착 속도와 박막 품질에서 우수한 Evaporation 법이 사용되고 있다. 한편, 대면적에 균일한 박막형성이 가능하기 때문에 양산성에서 우월성을 가지는 sputtering법의 경우, 밀도가 높은 소결체 타겟의 제조가 힘들뿐만 아니라 증착 속도가 낮아 장시간 증착 시 낮은 소결밀도로 인한 타겟 Particle 영향으로 인해서 대 면적에 고품질의 박막을 형성하기가 어렵다. 하지만 최근 소결체 타겟 제조기술 발달과 함께, 대면적화와 장시간 증착에 대한 어려움이 해결되고 있어 sputtering 법을 이용한 고품질 박막 제조 기술의 연구가 시급한 실정이다. 본 연구에서는 $50{\times}50$ mm 크기의 non-alkali 유리기판(Corning E2000) 위에 Evaporation과 RF magnetron sputtering을 사용하여 다양한 기판온도 (RT, 100, 200, 300, $350^{\circ}C$)에서 $1{\mu}m$의 두께로 CdTe 박막을 증착하였다. RF magnetron sputtering의 경우 CdTe 단일 타겟(50：50 at%)을 사용하였으며 Base pressure는 약 $5{\times}10^{-6}$ Torr 이하까지 배기하였고, Working pressure는 약 $7.5{\times}10^{-3}$ Torr에서 증착하였다. 시편과 기판 사이의 거리는 70 mm이며 RF 파워는 150 W로 유지하였다. CdTe 박막의 미세구조는 X-ray diffraction (XRD, BRUKER GADDS) 및 Field Emission Scanning Electron Microscopy (FE-SEM, Hitachi)를 사용하여 측정하였다. 또한, 조건별 박막의 조성은 Energy Dispersive X-ray Spectroscopy (EDS, Horiba, 7395-H)을 사용하여 평가하였다. X-선 동영상 장치의 구현을 위해서는 CdTe 다결정 박막의 높은 흡수효율, 전하수집효율 및 SNR (Signal to Noise Ratio) 등의 물성이 요구된다. 이러한 물성을 나타내기 위해서는 CdTe 박막의 높은 결정성이 중요하다. Evaporation과 RF magnetron sputtering로 제작된 CdTe 박막은 공정 온도가 증가함에 따라 기판상에 도달하는 스퍼터 원자의 에너지 증가로 인해서 결정립이 성장한 것을 확인할 수 있었다. 따라서 CdTe 박막이 직접변환방식 고감도 X-ray 검출기 광도 전층 역할을 수행할 수 있을 것으로 기대된다.

• Journal of agricultural medicine and community health
• /
• v.24 no.2
• /
• pp.269-289
• /
• 1999

This study was conducted to examine the relationship among health concern, health practice and ADL of elderly staying at home in a rural community and their affecting factors. Data were collected through direct interviews made with 480 old people aged more than sixty-five from November 15, 1998 to December 20, 1998. Out of 189 male and 291 female, the high-level group that showed high health concern accounted for 44.4%, the medium-level group for 13.1%, and the low-level group for 42.5%, in the health practice, the high-level group accounted for 3.8%, the medium-level group for 18.8%, and the low-level group for 77.5%. In the self-rated health status, the high-level group accounted for 29.0%, the medium-level group for 31.0%, and the low-level group for 40.0%, and in the ADL, the high ADL group accounted for 91.5%, and the low-level ADL group for 8.5%. The result of the chi-square test showed that for male, there was a significant relation between the health concern and the health practice index score. In the relation between the health practice index score and the self-rated health status, there was significant positive relationship between health practice index and self-rated health status, and in the relation between the health practice Index score and the ADL, old people with higher health practices showed good ADL(but not significant). Old people with good ADL also showed good self-rated health status. In the multiple regression analysis where the health practice was used as a dependent variable, the health concern was added to the sociodemographic variables as an independent variables, a formula was formed for male old people only and ones with high concern in health showed good health practice. In the multiple logistic regression analysis where the sociodemographic variables to which the health practices was added were used as an independent variable and the ADL as a dependent variable, the ADL appeared to be not good if for male old people the living costs were born by their sons and daughters and as for female old people their ages increased, but it was good if old people had sources of health information such as hospitals or health centers. The self-rated health status was worse, for male old people, if they had short living costs or diseases and for female old people, if they had spouses, living costs born by their sons and daughters or diseases, but it was better, for male old people, if they had periodical gatherings or carried out health practices a lot, and for female old people, if they had sources of health information such as hospitals or health centers or carried out health practices a lot. In view of the results stated above, the higher the old people had health concern, the more they carried out health practices, and the more they carried out health practices, the better they had ADL and self-rated health status that served as the level of health. Further, the better ADL, the better self-rated health status.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.559-568
• /
• 2011

This study aims at listing up those manufacturing activities sensitive to regional characteristics by analyzing locational hierarchy designed on the urban rank-size rule. This locational hierarchy by manufacturing activities is expected to provide a ground for the proper supply of an industrial complex. The analysis of the locational hierarchy by manufacturing activities can work as a method of observing the characteristics of the distribution of location for each economic activity by analyzing the trend in the change of manufacturing location. Consequently, it can be used to determine the appropriate manufacturing activities for the industrial complex of a particular region. Here, the locational hierarchy is analyzed depending on the base of the basic local government such as Gun(district level) and Si(city level), and manufacturing activities are categorized by Korea Standard Industry Code. Those activities demonstrating growth pattern are Manufacture of Electronic Equipment(KSIC 26), Manufacture of Medical Precision Optical Instruments Watch(KSIC 27), Manufacture of Motor Vehicles (KSIC 30, 31), etc. With proper infrastructures, these activities can be located everywhere. Those sectors on the decline pattern in the locational hierarchy can be summarized as Manufacture of Tobacco Products(KSIC 12), Manufacture of wearing apparel Fur Articles(KSIC 14), etc. Those sectors scattered widely in the locational hierarchy are Manufacture of Food Products(KSIC 10), Manufacture of Coke Petroleum Products(KSIC 19), Manufacture of Chemical Products(KSIC 20), Manufacture of Electronic Equipment(KSIC 26). These particular manufacturing activities can be operated in those regions in a sufficient supply of unskilled workers regardless of proper infrastructures. Those activities that have a tendency to reconcentrate on larger cities are Manufacture of Textiles(KSIC 13), Manufacture of Wearing Apparel Clothing Fur Articles(KSIC 14), Manufacture of Other Transport Equiptmen(KSIC 31). In most cases, these sectors tend to favor their existing agglomerated areas and concentrate around large cities. Therefore, it is inefficient to promote these sectors in small or medium-sized cities or underdeveloped regions. The establishment of developmental strategies of an industrial complex can gain greater competitiveness by observing such characteristics of the locational hierarchy.