• Journal of Oral Medicine and Pain
• /
• v.34 no.2
• /
• pp.207-216
• /
• 2009

Trigeminal neuralgia is defined "a sudden, usually unilateral, severe, brief, stabbing, recurrent pain in the distribution of one or more branches of the fifth cranial nerve". The initial treatment of choice for trigeminal neuralgia is medical therapy. In patients with medically intractable pain or intolerable medication side effects, invasive therapeutic approaches are often necessary. Based on the amount of evidence and estimated efficacy, carbamazepine is the drug of choice in the management of trigeminal neuralgia. In case of insufficient or no response to carbamazepine, second-line drugs can be added. In this study, the author tried to review and analyzed the cases of 90 patients whom had visited for treatment of trigeminal neuralgia at the Department of Oral Medicine, Kyungpook National University Hospital from 2003 to 2008. The results were as follows: 1. Trigeminal neuralgia was significantly more common with advancing age, and nearly twice as common in women than men (ratio of 2.1:1) 2. The maxillary branch of the trigeminal nerve involved most often (51.1%), and the right side of the face is affected more commonly than the left (ratio of 2.9:1). 3. 85(94.4%) patients had experiences visiting medical or dental specialties before being referred to the Department of Oral Medicine. 4. 40(44.4%) patients with trigeminal neuralgia had systemic diseases. 5. Treatment with carbamazepine monotherapy was satisfactory initially in 69(76.7%) the patients, and the mean daily dose of carbamazepine was 402.9mg. On the other hand, 16(17.8%) patients expressed effectiveness after combination therapy of carbamazepine and other drugs. 6. Of the 69 patients who had a good initial response to carbamazepine monotherapy, 18 patients became resistant, so that combination therapy of carbamazepine and other drugs were necessary. 7. 54(60%) patients developed side effects such as dizziness, drowsiness, nausea, vomiting, blood dyscrasias, skin rash and constipation, and 11 of the patients decided to stop tmedicaion due to side effects.

• Journal of dental hygiene science
• /
• v.16 no.2
• /
• pp.142-149
• /
• 2016

The number of male dental hygienists has been continuously increasing in dental services. The purpose of this study aimed to identify the relationship between job stress, job satisfaction, and turnover intention in male dental hygienists and to provide basic data to improve their job satisfaction. The study population was 110 Korean male dental hygienists working for dental clinics or hospitals. The data were collected from November 10 to December 7, 2015. After an explanation about the objective of the study, 110 questionnaires were distributed via email, and 97 responses were analyzed using SPSS. Overall averages of job stress, job satisfaction and turnover intention in male dental hygienists were 3.05, 2.92, and 3.47 out of 5, respectively. Some sub-factors of job stress, including interpersonal relationships at the workplace and future prospects of dental clinics, were proven to have statistically significant negative influence on job satisfaction (p<0.001). Regression analysis was performed with job stress and job satisfaction as independent variables and turnover intention as a dependent variable. Results showed that job stress had a positive effect on turnover intention (p<0.01) while job satisfaction had a negative effect on turnover intention (p<0.001). Job satisfaction was revealed to have statistically significant negative influence on turnover intention (p<0.001). Some of sub-factors of job stress, including work environment and future prospects of dental clinics and professional position, had a positive effect on turnover intention (p<0.05). The study showed that higher job stress led to higher turnover intention, and higher job satisfaction led to lower turnover intention. Accordingly, job stress and job satisfaction are critical factors for turnover intention in male dental hygienists.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1976.06a
• /
• pp.87.4-88
• /
• 1976

The statistcal study was done on 81 cases of the foreign bodies in the food passages (73 cases) and air passages (8 cases), who had visited the Dept. of Otolaryngology of Kyung Hee Medical Center and treated endoscopically, from Nov. 1971 to Mar 1976. The results were as follows, 1) The incidence of esophageal foreign bodies (73 cases) in order of frequency was coin (61 cases; 83.6%), bone (6 cases; 8.2%), food particles (3 cases; 4.1%), discs (2 cases), and other metals (l case). The incidence of foreign bodies in the air passages (8 cases) was food particles (3 cases; 37.5%), pointed metal (2 cases; 25%), plastic pencil cap (l case), plastic ring (1 case), and wood piece (1 case) in order. 2) In sex distribution, 51 cases (62.9%) were males and 30 cases (37.1%) were females, and the ratio between males and females was about 1.7 : 1.3. In the age incidence, 69 cases (82.5%) of all foreign bodies were under 5 years of age, and especially, coin cases were 59 cases (96.7%) and the highest was 8 years of age, lowest was 11 months of age. 7 cases (87.5%) of all airway foreign bodies were under 10 years of age. 4) The ratio between the food passages(73 cases) and the air passages (8 cases) was about 9 : 1. In the location of the foreign bodies of the food passages, 66 cases (90.4%) were in the first esophageal narrowing, 5 cases (6.9%) in the second narrowing, and 2 cases (2.7%) in the third narrowing. In the air passages, the frequent sites were trachea (5 cases; 62.5%), larynx (2 cases), and bronchus (1 case) in order. 5) In duration of lodgement, 63 cases (86. 3%) of esophageal foreign bodies were removed within 24 hours, and one case was removed within 16 days. The number of cases lodged within 24 hours were 4 cases (50%). in the air passages and one case was removed within 18 days. 6) In treatment, 37 cases (50.7%) of esophageal foreign bodies were extracted by modified upper esophagoscopy, 33 cases (42.5%) by esophagoscopy under the local anesthesia, 3 cases (4.1%) by esophagoscopy under the general anesthesia. 8 cases of the coin cases were passed into the stomach during the endoscopic examination. Laryngeal foreign bodies (2 cases; 25%) were extracted by laryngoscopy under the local anesthesia. 2 cases (40%) of tracheal foreign bodies by Bronchoscopy with tracheotomy under the local anesthesia, 3 cases (60%) by Bronchoscopy under the general anesthesia, and bronchial foreign body (1 case) by open thoracotomy under the general anesthesia, at the Dept. of Chest surgery.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.919-926
• /
• 2021

In this study, we wanted to find out the optimal angle as a modified tangential projection of the patella. In the experiment, we used Kyoto Kagaku's PBU-50 phantom. In the supine position, the F-T angle was set to 95°, 105°, 115°, 125°, 135°, 145°, and Patella tangential projection images were obtained by varying the X-ray tube angle by 5° so that the angle between the X-ray centerline and tibia at each angle was 5~20°. Image J was used for image analysis and the congruence angle, lateral patellofemoral angle, patellofemoral index and contrast to noise ratio(CNR) were also measured. SPSS 22 was used for statistical analysis, and the mean values of congruence angle, patellofemoral angle, patellofemoral index, and CNR were compared with Merchant method through one-way batch analysis and corresponding sample t-test. As a result of the study, in the case of congruence angle, the angle of incidence of the knee-angle X-ray centerline was 105°-72.5° (20° tangential irradiation), 115°-72.5°, 77.5° (15, 20° tangential irradiation), 125°-82.5° (20° tangential irradiation), lateral patellofemoral angle is 115°-72.5°, 77.5° (15, 20° tangential irradiation), 125°-72.5° (10° tangential irradiation), patellofemoral index is 115°-72.5° (15° tangential irradiation) and 125°-72.5° (10° tangential irradiation) were not significantly different from Merchant method (p> .05). In case of CNR, it is not different from Merchant method at 105°-67.5°, 72.5° (15, 20° tangential irradiation), 115°-67.5°, 72.5°, 77.5° (10, 15, 20° tangential irradiation). (P> .05). Based on the results of this study, high diagnostic value images can be obtained by setting the knee angle and the angle of incidence of the X-ray tube to 115°-72.5° (15° tangential irradiation) during the modified tangential examination of the knee bone. It was confirmed.

• Journal of Plant Biotechnology
• /
• v.48 no.3
• /
• pp.179-185
• /
• 2021

Indoor gardening includes wall greening, terrariums, and flower arrangements. Among these types of indoor gardens, the terrarium is easy to access for the general public, but in Korea, because of the focus on esthetics, the original purpose of creating terrariums, which was to grow plants sustainably in an enclosed space, has been lost. In addition, miniaturization of plants is required to grow plants in an enclosed space. Since the available plant species suitable for a terrarium are limited, only plants such as succulents, cacti, and moss have been used. In this study, Bronze (X Graptosedum) was used, and these problems were solved using the following three methods: placement and growth of virus-free plants in the terrarium; extending the diversity of plants with minimal size that can be planted in terrariums; and reducing the price of in vitro plants with minimal size by achieving large-scale production. In particular, tissue-cultured succulents were developed into a Vivorium by replacing the tissue culture container and renewing the composition of the plant. This paper suggests a new indoor horticultural field, Vivorium, that can improve the current limitations of terrariums and make them more accessible to the general public. The introduction and popularization of new indoor gardening fields with the increase in single-person households and indoor activities in the Pandemic era can also improve psychological stability among people and in the society.

• The Korean Journal of Blood Transfusion
• /
• v.29 no.3
• /
• pp.253-261
• /
• 2018

Background: A massive blood transfusion (MT) requires significant efforts by the Blood Bank. This study examined blood product use in MT and emergency O Rh Positive red cells (O RBCs) available directly for emergency patients from the Trauma Center in Ajou University Hospital. Methods: MT was defined as a transfusion of 10 or more RBCs within 24 hours. The extracted data for the total RBCs, fresh frozen plasma (FFP), platelets (PLTs, single donor platelets (SDP) and random platelet concentrates (PC)) issued from Blood Bank between March 2016 and November 2017 from Hospital Information System were reviewed. SDP was considered equivalent to 6 units of PC. Results: A total of 345 MTs, and 6233/53268 (11.7%) RBCs, 4717/19376 (24.3%) FFP, and 4473/94166 (4.8%) PLTs were used in MT (P<0.001). For the RBC products in MT and non-MT transfusions, 28.0% and 34.1% were group A; 27.1% and 26.0% were group B; 37.3% and 29.7% were group O, and 7.5% and 10.2% were group AB (P<0.001). The ratios of RBC:FFP:PLT use were 1:0.76:0.72 in MT and 1:0.31:1.91 in non-MT (P<0.001). A total of 461 O RBCs were used in 36.2% (125/345) of MT cases and the number of O RBCs transfused per patient ranged from 1 to 18. Conclusion: RBCs with the O blood group are most used for MT. Ongoing education of clinicians to minimize the overuse of emergency O RBCs in MT is required. A procedure to have thawed plasma readily available in MT appears to be of importance because FFP was used frequently in MT.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.3
• /
• pp.73-84
• /
• 2019

Despite decades of work experience, workers at small- and medium-sized enterprises(SME) here have yet to make inroads into the self-employed sector that utilizes the job competency they have accumulated at work after retirement. Unlike large companies, SME do not have a proper system for improving the long-term job competency of their employees as they focus on their immediate performance. It is necessary to analyse the independent variables affecting the job competency of employees of SME to derive practical implications for the personnel of SME. In the preceding studies, there are independent variable analyses that affect job competency in specialized industries, such as health care, public officials and IT, but the analysis of workers at SME is insufficient. This study set the person-job fit and organizational justice based on the prior studies of the independent variables that affect the job competency of SME general workers as a dependent variable. The sub-variables of each variable derived knowledge, skills, experience, and desire for person-job fit, and distribution, procedural and deployment justice for organizational justice, respectively. The survey of employees of SME in Korea was conducted from February to March 2019 by Likert 5 scales, and the survey was retrieved from 323 people and analyzed in a demonstration using the SPSS and AMOS statistics package. Among the four sub-independent variables of person-job fit, knowledge, skills and experience were shown to have a significant impact on the job competency, and desire was not shown to be so. Among the three sub-independent variables of organizational justice, deployment justice has a significant impact on job competency, but distribution and procedural justices have not. Personnel managers of SME need to improve the job competency of their employees by appropriately utilizing independent variables such as knowledge, skills, experience and deployment at each stage, including recruitment, deployment, and promotion. Future job competency modeling studies are needed to overcome the limitations of this study, which fails to objectively measure job competency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.99-106
• /
• 2019

The purpose of this study is to analyze the effects of the simulation-based professional cardiac resuscitation training on the performance of professional cardiac resuscitation performed by paramedics in the pre-hospital stage and to provide basic data for effective cardiac resuscitation. This study is an experimental study of the design before and after the control of non-equality. The subjects of this study were 16 newly recruited paramedics from K firefighting school. The simulation training program and evaluation papers used as the evaluation tool were reviewed and commented by 6 ACLS simulation experts (2 emergency medical doctor, 2 emergency medical professors, 2 KALS instructors)Respectively. The training consisted of 30 minutes of theory and 150 minutes of practical training. The lecturer first demonstrated for 5 minutes, and after training by individual debriefing after individual training, individual and team education was conducted The evaluation scale was given a 5 - point Likert scale. The SPSS 22.0 program for Windows was used. The general characteristics of the subjects were analyzed for frequency, the examination of homogeneity between the experimental group and the control group wasfulfilled by t test, and the difference test between the groups of the two groups was performed using the paired t-test. The homogeneity test was able to confirm the homogeneity between experimental group and control group. In the evaluation of six ACLS techniques, it was proven that the experimental group that received the simulation training had better performance in all aspects than the non - training control group. The following are the technical items to be performed. 1. Electrocardiogram 2. Specialized instrument 3. Treatment of fluid 4. Leadership and teamwork 5. Medical guidance 6. Evaluation during transfer. It was proved that paramedics who received simulation training were improved on their job performance ability than general lecture and training group. Therefore, if simulation training and education are applied to a student in the synthetic course or an emergency resident who is engaged in clinical practice, he / she will be able to perform his / her duties more proficiently. It is expected that emergency services provided to patients with cardiac arrest will be improved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.102-109
• /
• 2019

Purpose: The purpose of this study was to evaluate the accuracy of three types of intraoral scanners and the accuracy of the single abutment and bridge abutment model. Materials and methods: In this study, a single abutment, and a bridge abutment with missing first molar was fabricated and set as the reference model. The reference model was scanned with an industrial three-dimensional scanner and set as reference scan data. The reference model was scanned five times using the three intraoral scanners (CS3600, CS3500, and EZIS PO). This was set as the evaluation scan data. In the three-dimensional analysis (Geomagic control X), the divided abutment region was selected and analyzed to verify the scan accuracy of the abutment. Statistical analysis was performed using SPSS software (${\alpha}=.05$). The accuracy of intraoral scanners was compared using the Kruskal-Wallis test and post-test was performed using the Pairwise test. The accuracy difference between the single abutment model and the bridge abutment model was analyzed by the Mann-Whitney U test. Results: The accuracy according to the intraoral scanner was significantly different (P < .05). The trueness of the single abutment model and the bridge abutment model showed a statistically significant difference and showed better trueness in the single abutment (P < .05). There was no significant difference in the precision (P = .616). Conclusion: As a result of comparing the accuracy of single and bridge abutments, the error of abutment scan increased with increasing scan area, and the accuracy of bridge abutment model was clinically acceptable in three types of intraoral scanners.