• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.31-39
• /
• 2015

A special medical compression garment has been developed to be worn after surgery or treatment using an elastic fiber in which the amount of compression can be adjusted to a specified targeted area to reduce the formation of hypertrophic scarring. In order to develop this medical compression garments, specialized technical skill in fiber, compression class and body measurements are needed. This study provides product survey data for the development of medical compression garments. An investigation analyzed medical compression garments of 16 brands from 6 countries sold in the Korean market & online, such as Make Me Heal, Jobst, Bio Concepts, Design Veronique$^{(R)}$ Nouvelle and Leonisa$^{(R)}$ (USA), Respire(Germany), Malcom$^{(R)}$, Holistic garments and Jobskin(UK), Technomed, kanav Healthcare and Sindhoori surgicals(India), Soo medical and C&C medical(Korea), Secondskin(Australia). The main fibers of compression garments were nylon and spandex: in addition, the fiber content was different by country and brand. The number of compression classes of products was USA(4), UK(4), and India(4). For body measurements, USA and many brands used (bust, under bust, waist, hip, thigh, knee, calf, ankle, upper arm, elbow, wrist, armhole bicep) circumference and length.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.60-70
• /
• 2017

This study selects representative materials and sewing methods used to: produce medical compression clothing in domestic garment, understand physical properties according to sewing conditions before and after knitting, and propose a sewing method that can improve the functional properties of the medical pressure clothing for burn patients. This experiment used samples from two knitted fabrics of high-frequency, produced and sold among fabrics used to produce medical compression clothing in Korea. Sewing methods were N321, N502 and N601, most commonly used in the press clothing industry. Fabric A is most often reduced in EMT values when sewing N502. However, N321 and N502 are suitable sewing methods for the reliable to twist at the larger torsional shear and the larger 2HG, 2HG5 value. Fabric B is sewn with N601, the EMT value is the most elevated, LT value is also low and extensibility improves after sewing. N601 is shown as an appropriate sewing method for warp knitting. When sewing with N321, the torsional is stable but elongation is lacking. N502 is not good for torsional stability.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.