• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.255-264
• /
• 2007

In the current domestic and overseas standards concerning seismic design, especially on the capacity & demand spectra in the multi-story building, failure is caused more by story drift than by displacement; and the existing capacity spectrum method (CSM) does not make a close estimate of story drift because response is derived using displacement. Therefore, this paper proposes an improved CSM to estimate story drift and its direct effect on the collapse of structures, yet still maintaining the same advantage and convenience of the existing CSM about a most basic model of multi-story building: shear building. To establish its reliability, the proposed method is applied to an example model and results are then compared with those obtained through nonlinear time-history analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.85-93
• /
• 1997

In this paper, a novel method for obtaining spectra of short pulses is proposed. This method will be well-applied to perform spectral analyses of ultrashort laser pulses which are known to be difficult to evaluate their exact forms in frequency domain because of their narrow-width characteristics in time domain. It must be noted that the method can be represented by a recursive formula derived from the PRS(partial-response signaling) model, and thus more easily available for numerical solutions than the conventional methods such as consecutive differentiations and convolutions. The pulses whose fundamental frames can be exactly determined or approximately represented by truncated Fourier series have well-behaving conditions for applications of this new method. Moreover, the transversal 9-type PRS model can offer various approximations for spectral analyses of ultrashort pulses currently used in transmission systems.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.383-386
• /
• 2009

본 연구는 HAZUS에서 제시하고 있는 비보강 조적조 건축물의 구조적 손상상태에 대한 지진취약도함수와 관련하여 층간변위율 및 스펙트럼 변위 등의 매개변수를 평가하고 또한 국내 상황에 적합한 기존 비보강 조적조 건축물의 지진취약도곡선의 도출을 목적으로 하였다. 국내 상황을 고려한 지진피해를 추정하기 위하여 먼저 기존 비보강 조적조 건축물의 현황파악 및 지진취약도함수 산출방법을 분석하였다. 일반적으로 HAZUS에서 제시하고 있는 지진취약도함수는 역량스펙트럼을 변환시킨 가속도-변위응답 스펙트럼법을 기본적으로 사용하는 상황으로 국내 기존 비보강 조적조 건축물에 대한 지진취약도함수 개발을 위하여 Midas GEN Ver.741 구조해석프로그램을 사용하여 실제 23개동의 비보강 조적조 건축물을 대상으로 역량스펙트럼 해석을 수행하였다. 연구결과를 통하여 지진취약도함수의 주요 매개변수인 손상상태별 층간변위율 및 스펙트럼 변위를 제시하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.25-30
• /
• 2006

An infrared imaging method is proposed in which direct measurement of the spectral response of CCD sensors can be achieved through digital image processing. This method allows for a simple and economic method to detect the spectral sensitivity of commercialized CCD sensors. The key components of the apparatus are a monochromator, CCD-sample supporter and a personal computer equipped with a digital image processing systems. Tentative experimentation conducted on the commercialized CCD camera has resulted in a fairly consistent agreement with the theoretical model.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.229-235
• /
• 1997

In order to check the influence of the randomness in yield strengths on the energy dissipation capacity of steel structures, behaviour factors applied for the "Response Spectrum Method" and their distributions are determined in this study with 7 steel framed models. Also 4 artificial accelerograms simulated with a given spectrum are applied to check the influence of the randomness in seismic action on the behviour factor. To execute numerous time-step calculations for the investigation a time-step analysis method is developed and applied after the reliability estimation to determine the action effects.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.119-126
• /
• 2010

The some papers which deal with the dynamic instability for shell-like structures under the dynamic excitation have been published, but there are few papers which treat the essential phenomenon of the dynamic buckling using the phase plane for investigating occurrence of chaos. In nonlinear dynamic, examining the characteristics of attractor on the phase plane and investigating the dynamic buckling process are very important thing for understanding why unstable phenomena are sensitively originated by various initial conditions. In this study, the direct and indirect snapping of shallow EP shell considering geometrical nonlinearity are investigated by Galerkin method numerically. This finding out the characteristic of the dynamic instability through the phases curves and running response spectrum.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.407-417
• /
• 2005

An experimental and analytical study was performed to apply the friction pendulum system (FPS) to the main control room of a nuclear power plant. A friction pendulum bearing was fabricated, and the dynamic response of the bearing was evaluated. A partial model of a main control room attached to the FPS was tested on the shake table. The model consisted of a cabinet, a $3m\times3m$ access floor, and four friction pendulum bearings. The artificial time history based on the floor response spectrum of the main control room was used as the earthquake input signal in the test. Comparisons between the analytical study and the experimental study were conducted to verify the results and to extend the experimental study to the range of parameters that could not be experimentally studied.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.2
• /
• pp.17-29
• /
• 1997

Single-mode spectral analysis method is usually applied to a small-scale bridges with the simple geometric shape and uses only fundamental period to estimate the elastic earthquake forces and the displacements of the substructure. On the other hand, multi-mode spectral analysis method may be used instead if the possibilities of potential damage are developed when considering significance, scale, and geometric shape of briages. Since the dynamic responses of bridge can be significantly different depending on the modeling techniques for the restraint and support conditions etc, it may be misled to the unexpected results. In this study the dynamic analysis program which can model and analyze the bridge as a two- or three-dimensional framed structure is developed and verified with the results of other reliable program. Using this program together with the post processor, the designer can easily and readily obtain the reponses(moments, base shears, and displacements)of bridges necessary to design purpose. And further from the analysis results according to the variations of type, scale, and restraint and supprot conditions of bridges including sectional properties, applications of the effective and desirable seismic design are presented.

• Journal of the KSME
• /
• v.20 no.5
• /
• pp.387-391
• /
• 1980

일반적으로 내진 설계라 함은 지진에 의하여 발생된 지진동이 특정한 구조물에 작용할 때 이 지 진동의 경향하에서도 구조물의 정상적인 기능을 추진할 수 있도록 설계하는 것을 말하는 바, 원자력발전소의 내진설계에 있어서도 원칙적으로는 동일한 개념이나 실시하는 규정이 타구조물에 비하여 훨씬 엄격한 것이 다른 점이라 하겠다. 현재 우리나라의 경우 원자력 발전소는 1기(고리 #1)가 가동중이고 2기(월성 #1, 고리 #2)가 거의 완공단계에 있으며 7기(고리 #3, #4, 월성 #2, 계마 #1, #2, 부구 #1, #2)가 건설작업중인 바 이중 부구의 경우만 프랑스(\ulcorner)에서 건설 예정이고 기타는 모두 미국 및 카나다에서 건설하였거나 건설 예정이므로 따라서 그 설계에 있어서도 제 규정은 대체로 미국것을 준용하고 있는 형편이다. 그러므로 본고에서 는 미국에서 시행되고 있는 방법 또는 규정에 의거하여 내진설계용 입력지진에 대하여 설명하고자 한다. 내진설계에 입력 으로 사용되는 지진을 설계기준지진(design basis earthquake, DBE)이라고 통칭하며 이 지진은 미국 규정에 의하면 응답스펙트럼(response spectrum)으로 정의되게 되어 있으며 또한 이 응답 스펙트럼에 준하는 인공정인 지진의 시간기득(artificial time history)을 작성 또는 선정하여 이를 발전소 구조물의 내진 해석 및 내진 시험 입력으로 사용하게 되어 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.220-221
• /
• 2015

플로팅 건물의 변동 풍하중에 대한 시간이력응답을 통한 유효 Sampling의 영향을 분석하기 위하여 200개 풍 파랑 하중조합을 통해 시간이력 동수역학 해석을 수행하여, 유효 표본 Sampling을 선정하여 상부구조물의 고유주기를 변화하여 부분구조해석을 수행하였다. 풍하중은 평균 속력 35m/sec을 가진 von Karman의 변동풍속 파워스펙트럼으로 계산하여 입력하였고 입력 파랑은 Pierson-Moskowitz 스펙트럼으로 계산하여 파고 0.5m에 대하여 입력하였다. 각기 다른 고유주기를 가진 상부 구조물에 대하여 7개 그룹의 하중조합에 대한 유효 Sampling을 선정하여 SRSS와 평균값을 계산하였다. 해석 결과, 최소 7개 이상의 Sampling에 대한 해석이 요구되며 전반적으로 30개 Sampling을 통한 해석이 적절하다고 분석되었다.