• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.271-278
• /
• 2000

In this study the effect and applicability of viscoelastic dampers on the seismic reinforcement of steel framed structures are investigated in the context of the performance based design approach. The effect of the damper on dissipating the input seismic energy was investigated with a single degree of freedom system. For analysis models a five-story steel frame subjected to gravity load, a ten-story and twenty-story structure subjected to gravity and wind load were designed. The code-specified design spectrums were constructed for each soil type and performance objective, and artificial ground excitation records to be used in the nonlinear time history analysis were generated based on the design spectrums. Inter-story drift was adopted as the primary performance criterion. According to the analysis results, all model structures turned out to satisfy the performance level for most of the soil conditions except for the soft soil(operational level). It was also found that the seismic performance could be greatly enhanced, and the structures were led to behave elastically by installing viscoelastic dampers on appropriate locations.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.217-225
• /
• 2009

Recently, intensive research efforts are world-widely forced on the development of sport shoes improving both the injury protection and the playing performance by taking kinesiology and biomechanics into consideration. However, the success of this goal depends definitely on the reliable evaluation of the dynamic responses of sport shoes and human foot, particularly the landing impact characteristics. It is because the landing impact force is a main source of unexpected injuries and influences the playing performance in court sport activities. This paper addresses the application of finite element method to the evaluation of landing impact characteristics of barefoot and several representative court sport shoes in running. In order to accurately reflect the coupling effect between human foot and shoes accurately, we construct a fully coupled three-diemensional foot-shoe FEM model which does not rely on the independent experimental data any more. Through the numerical simulation, we assessed the reliability of the numerical FEM model by comparing with the experimental results and investigated the landing impact characteristics, such as GRF, MIF, acceleration and frequency responses, of representative court sport shoes.

• The KIPS Transactions:PartB
• /
• v.11B no.5
• /
• pp.573-580
• /
• 2004

As the modern techniques have improved, people intend to store and manage the information on the web. Especially, it is the image data that is given a great deal of weight of the information because of the development of the scan and popularization of the digital camera and the cell-phone's camera. However, most image retrieval systems are still based on the text annotations while many images are creating everyday on the web. In this paper, we suggest the new approach for the semantic image retrieval using the RDF metadata based on the representation of the spatial relationships. For the semantic image retrieval, firstly we define the new vocabularies to represent the spatial relationships between the objects in the image. Secondly, we write the metadata about the image using RDF and new vocabularies. Finally. we could expect more correct result in our image retrieval system.

• The KIPS Transactions:PartA
• /
• v.16A no.4
• /
• pp.289-298
• /
• 2009

Generally, RFID systems are composed of one reader and several passive tags, and share the single wireless channel. For this reason, collisions occurwhen more than two tags simultaneously respond to the reader's inquiry. To achieve this problem, many papers, such as QT[8], HCT[10], BSCTTA[2], and QT-BCS[9], have been proposed. In this paper, we propose the tree-based anti-collision algorithm using a bit change sensing unit (TABCS) based on BSCTTA algorithm. The proposed algorithm can identify bits returned from tags through bit change sensing unit, even if multi collisions occur. So, it rapidly generates the unique prefix to indentify each tag, and reduce the total of bits. As the result, the cost of identifying all tag IDs is relatively reduced as compared with existing algorithms. It is verified through simulations that the proposed algorithm surpass other existing algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.57-63
• /
• 2017

This paper presents an active acoustic-reflection control algorithm based on a single sensor. The proposed algorithm operates in a system comprising a single sensor located nearby the reflective surface and a control transducer mounted on the reflective surface. First, the incident and reflected acoustic signals are separated from the sensor signal, and a control signal is generated using the separated signals. For the signal separation, the proposed algorithm requires the response of the reflection path which is estimated from the acoustic response between an external sound source and the sensor. Finally, the control filter is adjusted using the FxLMS (Filtered-x Least Mean Square) algorithm. To verify the effectiveness of the proposed algorithm, it was implemented in real time using a DSP (Digital Signal Processing) board, and the experimental results obtained in one-dimensional air-acoustic environment show that the reflections of the 1 kHz burst can be reduced by 11.6 dB.

• Journal of Digital Contents Society
• /
• v.2 no.1
• /
• pp.73-79
• /
• 2001

Most of the existing algorithms try to disseminate the multimedia contents of internet service provider(ISP), without taking into account the needs and characteristics of specific websites including e-learning systems with web-based .educational contents. Sometimes the client must select the best one among the replicated repositories. However, this is a less reliable approach because clients' selections are made without prior information on server load capacity. In this paper we propose an agent system inspired by the need of improving QoS of delivering web-based educational multimedia contents without incurring long access delays. This agent system consists of three components, Analyzer, Knowledge Base, and Automaton embedded the capacity algorithm. It analyzes and investigates traffic information collected from individual replicated server by learners' requests, and selects a server which is available and is expected to provide the fastest latency time and the lowest loaded capacity, and achieves high performance by dynamic replicating web resources among multiple repositories.

• Journal of Digital Contents Society
• /
• v.2 no.1
• /
• pp.51-61
• /
• 2001

The FLC(Fuzzy Logic Controller) is stronger to the disturbance and has the excellent characteristic to the overshoot of the initialized value than the classical controller, and also can carry out the proper control being out of all relation to the mathematical model and parameter value of the system. But it has the restriction which can't adopt the environment changes of the control system because of generating the fuzzy control rule through an expert's experience and the fixed value of the once determined control rule, and also can't converge correctly to the desired value because of haying the minute error of the controller output value. Now there are many suggested methods to eliminate the minute error, we also suggest the GA-FNNIC(Genetic Algorithm Fuzzy Neural Network Intelligence Controller) combined FLC with NN(Neural Network) and GA(Genetic Algorithm). In this paper, we compare the suggested GA-FNNIC with FLC and analyze the output characteristics, convergence speed, overshoot and rising time. Finally we show that the GA-FNNIC converge correctly to the desirable value without any error.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1113-1121
• /
• 2015

In this study, we have focused on the design of a controller and an operating program for the operation of the hydraulic actuators used in a shaker. To control the motion of the shaker accurately, the position of each hydraulic cylinder should be controlled precisely even under an uncertain environment. For this purpose, we have suggested a control algorithm using an FRF (frequency response function) based control which senses the behavior of the actuator in advance, calculates a transfer function through the system identification method, and provides the final control input. The experimental results on the performance of this system were compared with that of a simple PID control algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.54-58
• /
• 2007

Development of high performance LTPS TFTs contributed to open up new SOP technology with various digital circuits integrated in display panels. This work introduces the current mode logic(CML) gate design method with which one can replace slow CMOS logic gates. The CML inverter exhibited small logic swing, fast response with high power consumption. But the power consumption became compatible with CMOS gates at higher clock speed. Due to small current values in CML, layout area is smaller than the CMOS counterpart even though CML uses larger number of devices. CML exhibited higher noise immunity thanks to its non-inverting and inverting outputs. Multi-input NAND/AND and NOR/OR gates were implemented by the same circuit architecture with different input confirugation. Same holds for MUX and XNOR/XOR CML gates. We concluded that the CML gates can be designed with few simple circuits and they can improve power consumption, chip area, and speed of operation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.201-208
• /
• 2014

The performance of a landmine detection system depends on consistent extractions of the features of landmines. Since landmines have diverse sizes, it is critical to select an appropriate window size to represent the landmine region consistently. Conventional detection systems are incapable of extracting consistent landmine features because they employ fixed window sizes. This paper proposes a window size selection method according to the size of a landmine. The proposed method selects an appropriate window size based on the type of a landmine estimated from the response signal of the system. Data on various types of soils and landmines were generated from a simulation program to evaluate the performance of the proposed method. The results verified that the proposed method, which employs an adaptive window size, yields a better landmine detection rate than the conventional methods, which employ fixed window sizes.