• The Journal of the Acoustical Society of Korea
• /
• v.11 no.1
• /
• pp.5-13
• /
• 1992

Since power spectrum has no information about the phase of a signal, the power spectral analysis technique can not be used to interpret the phase coherency of the signal produced by some nonlinear process. In this case, third-order spectrum, the so called bispectrum, is very useful in analyzing such signals. some typical computer simulation results are shown in order to represent the usefulness of the bispectrum, and the bispectra of the measured acoustic signals of three vehicles are shown in order to use to identify the sources of those signals.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.128-133
• /
• 1986

설비진단에 응용되는 신호처리의 기법으로는 파워스펙트럼, 바이스펙트럼, 켑스트럼 등이 사용되었다. 파워스펙트럼은 이론적인 면과 계산과정 그리고 신호처리에서의 적용방법등이 잘 알려져서 성공적으로 사용되어져 왔다. 특히 음향분야에서는 여러가지 응용기술이 개발되어 실제계에 적용되고 있으며 계측장비도 파워스펙트럼 해석법에 알맞게 개발되어져 왔다. 파워스펙트럼해석법을 사용하여 진동계를 구성하는 각 요소들의 고유진동수와 진동계 전체를 나타내는 진동파들의 주파수성분 간의 관계에 의하여 진동의 원인 및 소음원 등을 추정하는 것이 가능하다. 그러나 파워스펙트럼은 일반적으로 정상적인 신호를 갖는 진동계에 대한 해석 일 때는 그 이론과 실제가 잘 일치하지만, 진동계 자체가 항시 임의의 주파수를 갖고서 움직일 때 그 해석에는 다음과 같은 문제점이 생긴다. 첫째, 불규칙한 진동계에서는 규칙적인 진동계보다 잡음의 영향을 많이 받기 때문에 실제로 잡음이 진동계의 고유주파수 부근에 있을 경우에는 파워스펙트럼해석으로는 불가능한 경우가 있다. 둘째, 진동파 중에 포함되어 있는 위상이라는 중요한 정보가 없다. 셋째, 시간지연에 따른 진동계의 정확한 정보를 얻을 수 없다. 이상에서 볼 때 파워스펙트럼해석법은 한계가 있음을 알 수 있다. 따라서 본 논문은 바이스펙트럼이라는 해석법을 사용하여 정상과정에서 비정상과정으로 시간지연에따라 변하는 진동계 또는 정상적인 진동계의 저주파에서의 상호간섭 정도 및 위상관계를 관찰함으로써 파워스펙트럼과 비교하여 바이스펙트럼해석법의 타당성을 검토한다. 바이스펙트럼의 실제적인 계산방법은 P. J. Huber가 세가지 접근 방법을 제안했는데 시간영역에서의 평균화를 행하여 계산하는 법, 연속된 기록들을 평균화하는 것, 주파수 영역에서의 평균화를 행하는 것 등이 있다. 본 논문에서는 FFT를 먼저 행하고 파워스펙트럼과 바이스펙트럼 및 바이코히어런스를 구하였다. 그러나 바이스펙트럼해석법은 수치해석적인 면에서 볼 때 파워스펙트럼해석법에 비하여 미약한 점이 많고 통계학적인 그 의미가 확실하게 알려져 있지 않기 때문에 본 논문에서는 시뮬레이션을 통하여 그 물리적 의미를 규명하고져 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.7
• /
• pp.396-401
• /
• 2011

In this paper, we propose a novel voice activity detection (VAD) algorithm to effectively distinguish speech from nonspeech in various noisy environments. The presented VAD utilizes the power spectral deviation (PSD) based on Teager energy (TE) instead of the conventional PSD scheme to improve the performance of decision for speech segments. In addition, the speech absence probability (SAP) is derived in each frequency subband to modify the PSD for further VAD. Performances of the proposed VAD algorithm are evaluated by objective test under various environments and better results compared with the conventional methods are obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.40-47
• /
• 1995

A system for measurement of ultrasonic velocity, attenuation and complex modulus of materials by using the spectral analysis method of pulses has been constructed and its performances are estimated. The system has a mechanical scanning part of an acoustic microscope with a ZnO plane wave transducer of the resonant frequency of 85MHz. Ultrasonic velocity has been obtained by the intervals of maxima (or minima) on the power spectrum of a pulse train reflected from the surface and bottom of a specimen, and attenuation has been obtained by the power spectra of three pulses reflected from the surface and the bottom of a specimen and the surface of a standard specimen. The measured results for materials such as fused quartz, polyester show that the system has very high accuracy.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.85-92
• /
• 1999

The fact that material degradation can be evaluated by measuring nonlinear acoustic effect has been proposed by previous studies. The most conventional method to measure nonlinear acoustic effect is to measure the absolute magnitude of fundamental and $2^{nd}$ order harmonic frequency component in the propagated ultrasonic wave. For this aim, power spectral analysis technique has been used widely. However, the power spectral analysis has fatal disadvantage that the gaussian additive noise superimposed in the wave signal remains in the power spectrum domain. Moreover, the magnitude of $2^{nd}$ order harmonic frequency component generated by nonlinear effect is so small that it may be suppressed by the noise remained in the power spectrum. In order to overcome this problem, this paper proposes an alternative method using bispectrum analysis, which can reduce the effect of addictive gaussian noise and. the nonlinear parameter can be obtained more stably. Simulations showed that the proposed method can obtain the value of nonlinear parameter near to the true value in the case of low SNR signal. Also, in order to confirm the usefulness of our method in actual case, we compared the nonlinear parameter obtained by using both of power spectral and bispectral analysis for several specimen intentionally degraded by fatigue load.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.170-176
• /
• 2002

Nonlinear acoustic effect has been considered as an effective tool for the evaluation of material degradation. In this paper, the applicability of nonlinear acoustic effect to the evaluation of degraded 2.25Cr-1Mo steel is investigated. Firstly, artificial aging was performed to simulate the microstructural degradation in 2.25Cr-1Mo steel arising from long time exposure at $540^{\circ}C$. Secondly, ultrasonic nonlinear parameter was quantitatively measured by bi-spectrum and power spectrum. Nonlinear acoustic parameter from bi-spectrum was found to be clearly sensitive to the aging time.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.660-669
• /
• 2003

This paper describes a theory to calculate sound source field from the spatial transform of sound field and the measured cross-power spectrum of sound pressure over a hologram plane close to a sound source, Calculating method is proposed to solve sound pressures from cross-power spectrums over a hologram plane, For this, Taylor series for the nonlinear equations is expanded, and it is calculated using Newton-Raphon method, Also, a wave number filter is used to reduce errors that is occurred on the backward propagation, and is performed numerical simulation of the circular piston sound source with infinite baffle in water to verify the proposed theory.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.44-46
• /
• 1997

Near field 에서는 진폭 감쇄정보를 이용할 수 있으므로 음원의 거리와 도래각을 추정하는 것이 가능하다. 고정된 3개의 수음점에서 자기,상관 파워스펙트럼 분석을 하여 추정하는 원리와 추정치의 분포영역, 음원의 정위한계에 대하여 나타내었다.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.255-261
• /
• 2005

In this paper. experiments are conducted to extract a set of non-Parametric warping functions to examine the characteristics of the warping among speakers' utterances. For this Purpose. we made use of MFCC and LP spectra of vowels in choosing reference spectrum of each vowel as well as representative spectra of each speaker. These spectra are compared by DTW to give the warping functions of each speaker. The set of warping functions are then defined by clustering the warping functions of all the speakers. Noting that male and female warping functions have shapes similar to Piecewise linear function and Power function respectively, a new hybrid set of warping functions is defined. The effectiveness of the extracted warping functions are evaluated by conducting phone level recognition experiments, and improvements in accuracy rate are observed in both warping functions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.581-588
• /
• 2002

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels omitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured Korea highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of Korea highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power show little difference within 1 dB.