• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1131-1136
• /
• 2011

This study is performed on the acoustic emission parameters involved in a burst test for a CNG-vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached on the composite materials in the center of the fuel tank. The analysis of AE parameters such as hit, amplitude, count, duration, risetime, and signal strength during load holding was performed. The total count and total signal strength are effective tools for the damage evaluation of a CNG fuel tank.

• Composites Research
• /
• v.18 no.2
• /
• pp.1-12
• /
• 2005

Fracture behaviors of single-edge-notched monolithic aluminum plates and glass fiber/aluminum laminates under tensile loadings have been studied using acoustic emission(AE) monitoring. AE signals from monolithic aluminum could beclassified into two different types. For glass fiber/aluminum laminates, AE signals with high amplitude and long duration were additionally confirmed on FFT frequency analysis, which corresponded to macrocrack propagation and/or delamination. AE source location determined by signal arrival time showed the zone of fracture. On the basis of the above AE analysis and fracture observation, characteristic features of fracture processes of single-edge-notched glass fiber/aluminum laminates were elucidated according to different fiber ply orientations and fiber/aluminum lay-up ratios.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.199-202
• /
• 2004

해양에서 연구목적으로 저주파 음원으로 사용하고 있는 폭발성 음원(SUS: Signals, Underwater Sound)의 신호특성을 파악하기 위해 1999년 9월에 동해의 대륙사면에서 1마일에서 80 마일까지 약 1에서 5마일의 정해진 간격으로 SUS를 투하하여 발생된 음향신호를 거리 및 수신수심별로 수신하였다. 주파수 필터를 사용하여 분석한 결과, 1 kHz이상의 고주파수 성분이 폭발시에 먼저 방출되며 저주파수 신호는 뒤이어 발생됨을 확인하였다. 이것은 폭약이 폭발시에 일어나는 메카니즘과 관련이 있는 것으로 사료된다. 거리의 증가에 따라 잔향의 영향을 받아 뒤이어 수신되는 파속(wave packet)들을 확인할 수 있었으며, 신호에 많은 영향을 주고 있었으나 잔향 분석은 여기서는 제외하였다. 본 연구는 실해역에서의 SUS신호에 관한 많은 자료를 분석한 것으로서 그 신호특성에 관한 이번 고찰은 해양음파전달시 사용하는 SUS 음향신호 해석에 많은 도움을 줄 것으로 기대한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.198-204
• /
• 2003

A basic experiment was performed to control tile plant growth using acoustic emission technique considering the environmental conditions for plant. At a dry soil condition, the signals due to the cavitation from xylem of angiosperm and gymnosperm were mainly detected. The strong signal from xylem and the weak signal from plasmodesmata and casparian strip were detected at the same time after distilled water was provided. Two signals after providing tile acid and distilled water were contrary to each other. The wind, number of leaf, music, temperature and humidity affected the acoustic emission count from plants but the frequency ranges of the detected signals were the same.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.891-897
• /
• 2013

In this study, the compressive deformation behaviors of aluminum alloy under high strain rates were investigated by means of a SHPB test. An acoustic emission (AE) technique was also employed to monitor the signals detected from the deformation during the entire impact by using an AE sensor connected to the specimen with a waveguide in real time. AE signals were analyzed in terms of AE amplitude, AE energy and peak frequency. The impacted specimen surface and side area were observed after the test to identify the particular features in the AE signal corresponding to the specific types of damage mechanisms. As the strain increased, the AE amplitude and AE energy increased whereas the AE peak frequency decreased. It was elucidated that each AE signal was closely associated with the specific damage mechanism in the material.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.48-53
• /
• 2003

This study is to look at the effect for deformation of carbon steel for high-presure pipe, on the AE signals produced by tensile test. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. We investigated a relationship failure mode and AE signals by tensile test, From the tensile test, we could divide into four ranges of the failure modes of elastic range, yield range, plastic range before $\sigma$u, plastic range after $\sigma$u. And failure behaviors of elastic range, yield range, plastic range before $\sigma$u, plastic range after $\sigma$u could be evaluated in tensile test by AE counts, accumulation counts and time frequency analysis. It is expected to be basic data that can protect a risk according to tensile test and bending of pipe material for pressure vessel, as a real time test of AE.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.31-38
• /
• 2013

This research analyzed the acoustic emission signals collected from the pin loading tests and investigated the effect of hygrothermal exposure on the fracture behavior of the pin-jointed carbon fiber/epoxy composites. The composite specimens include: the Base specimen that has not been exposed to any environments, the RT specimen that has been immersed in room temperature water, and the HT specimen that has been immersed in high temperature water. According to the pin loading test, the RT and the HT specimens showed 2.2% and 13% decreases in the bearing strength compared to the Base specimen, respectively. The analysis of the acoustic emission signals showed different fracture acceleration points for three types of the specimens. Furthermore, for the RT and the HT specimens, the event from the matrix crack signals in the composites decreased. This shows the effect of the hygrothermal conditions on the acoustic emission signals. Additionally, upon investigating the fracture behaviors of the pin-jointed composites, the exposing specimens to hygrothermal environments decreases the interfacial characteristics of the composites.

• Composites Research
• /
• v.35 no.2
• /
• pp.61-68
• /
• 2022

Composite materials have been used in aerospace industry and many applications because of many advantages such as specific strength and stiffness and corrosion resistance etc. However, it is vulnerable to impacts, these impact lead to formation of cracks in composite laminate and failure of structures. In this paper, we analyzed Mode I fracture toughness of Carbon/Epoxy laminates using acoustic emission signal. DCB test was carried out to analyze Mode I failure characterization of Carbon/Epoxy laminates, and AE sensor was attached to measure AE signal induced by failure of specimen. Fracture toughness was calculated using cumulative AE energy and measured crack length using camera. The calculated fracture toughness was applied in FE model and the result of FE analysis compared with DCB test results. The results show good agreement with between FEM and DCB test results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.254-262
• /
• 2003

In this study, acoustic emission (AE) signals due to surface cracking and moisture movement in the flat-sawn boards of oak (Quercus Variablilis) during drying under the ambient conditions were analyzed and classified using the principal component analysis. The AE signals corresponding to surface cracking showed higher in peak amplitude and peak frequency, and shorter in rise time than those corresponding to moisture movement. To reduce the multicollinearity among AE features and to extract the significant AE parameters, correlation analysis was performed. Over 99% of the variance of AE parameters could be accounted for by the first to the fourth principal components. The classification feasibility and success rate were investigated in terms of two statistical classifiers having six independent variables (AE parameters) and six principal components. As a result, the statistical classifier having AE parameters showed the success rate of 70.0%. The statistical classifier having principal components showed the success rate of 87.5% which was considerably than that of the statistical classifier having AE parameters.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06d
• /
• pp.9-12
• /
• 1998

공기경계층을 갖는 유리평판에서 힘의 크기가 10N이고 상승시간이 약 280ns 인 경사 점하중이 인가된 경우에 대하여 진앙점에서 입자 변위와 입자 속도를 계산하였다. 이론적으로 계산된 수직성분이 입자속도가 PZT변환자에 입사한다고 가정하여 PZT 변환자의 과도 응답특성을 Mason 등가회로와 격자점을 이용하여 계산하였다. 유리모세관의 파과시에 방출괴는 과도탄성파를 이용하여 유리평판의 진앙점에서 PZT 변환기의 응답을 조사하였고, 이론과 비교한 결과 상당히 일치하였다. 이를 이용하여 음향방출 시스템인 발생원, 전파매질, 변환자 및 신호분석시스템을 수학적으로 모형화할 수 있는 기초를 마련하였다.