• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.272-275
• /
• 2008

공연장음향성능에 영향을 미치는 중요한 부자재중의 하나인 음향반사판의 면밀도 변화에 따른 흡음특성 변화를 조사하였다. 음향반사판은 목질계반사판으로 밀도 변화는 $11\;㎏/m^2{\sim}41k\;㎏/m^2$으로 총 3개의 시료를 대상으로 측정하였다. 저주파 대역에서의 흡음률을 측정하기 위하여 서브우퍼와 무지향성 스피커를 사용하였으며 측정결과 중고주파수 대역의 흡음률은 면밀도 변화에 따라 큰 차이가 없었으나 저주파수 대역의 흡음률을 면밀도 변화에 따라 차이가 있는 것으로 나타났다. 향후 음악 공연 공간내의 음향반사판의 면밀도 변화에 따른 실내 음향 특성 변화 및 설계지침에 대한 연구가 필요할 것으로 사료된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.808-815
• /
• 2003

최근에 이르기까지 문화예술회관들이 대중들의 문화적인 욕구에 의하여 많이 건립되었으나 대중들과 음악가와 연주자들을 도외시한 채 건축음향 기획 없이 건립되어진 많은 문화예술회관들이 지방자치시대를 맞이하여 지방재정에 적잖은 부담으로 작용하고 있으며 또한 민영화로 독자적으로 운영을 하지 않으면 안되게 되었다. 이와 같은 경쟁체제에서 많은 문화예술회관들이 음향문제로 많은 어려움을 겪고 있으나 대책은 미미한 실정이다. 본 연구는 U문화예술회관의 대공연장을 중심으로 대공연장의 음향특성을 측정분석하고 최근 6년간의 공연장의 장르별 이용률을 기초 자료로 활용하여 측정 결과를 중심으로 대공연장의 개선방향을 설정하고 음향 시뮬레이션를 통한 음향인자를 (잔향시간 (RT60, EDT), 명료도(C80, D50), LF, 음압레벨) 비교분석 평가하였다. 그리고 설계에 반영 벽체에 음향 보강 반사판을 시설하고 분석하여 리모델링 공사 후 음향특성이 개선됨을 확인할 수 있었으며 벽체에 시공된 반사판의 효능을 입증할 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.505-508
• /
• 2002

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.54-62
• /
• 2013

In this study, a wireless and non-power SAW (surface acoustic wave) temperature sensor was developed. The single inter-digital transducer (IDT) of SAW temperature sensor of which resonance frequency is 434 MHz was fabricated on $128^{\circ}$ rot-X $LiNbO_3$ piezoelectric substrate by semiconductor processing technology. To find optimal acoustic reflector for SAW temperature sensor, various kinds of acoustic reflectors were fabricated and their reflection characteristics were analyzed. The IDT type acoustic reflector showed better reflection characteristic than other reflectors. The wireless temperature sensing system consisting of SAW temperature sensor with dipole antenna and a microprocessor based control circuit with dipole antenna for transmitting signal to activate the SAW temperature sensor and receiving the signal from SAW temperature sensor was developed. The result with wireless SAW temperature sensing system showed that the frequency of SAW temperature sensor was linearly decreased with the increase of temperature in the range of 40 to $80^{\circ}C$ and the developed wireless SAW temperature sensing system showed the excellent performance with the coefficient of determination of 0.99.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.429-436
• /
• 2012

In concert halls and auditoriums, acoustic reflector and stage enclosure is one of the main factors on the room and stage acoustic characteristics. As a stage enclosure and acoustic reflector honey comb based light-weight reflector is widely used, because it is easy to install. However, there was not enough research on the surface density effect on room and stage acoustics. In this study, sound absorption coefficient tests on three kinds of wooden acoustic reflectors with different surface density were conducted. Surface density of acoustic reflector was changed from 11 kg/$m^2$ to 41 kg/$m^2$. For the low frequency excitation, sub-woofer was used with omnidirectional loud-speaker simultaneously. From the experiments, it was found that sound absorption coefficient below 250 Hz band was decrease by the increment of surface density. In order to check the influence of the surface density on room and stage acoustic parameters, room acoustic simulation was conducted with sound absorption coefficients, which were tested in reverberation chamber. By the increment of surface density of acoustic reflector, RT(reverberation time) and EDT(early decay time) were increased. Also, ST(stage support) was improved in low frequency bands.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.49-52
• /
• 1998

콘서트홀의 음향상태를 평가하기 위해서는 설문지를 통하여 주관적인 선호도를 조사하는 방법과 측정을 통하여 객관적인 지표를 뽑아내는 방법이 있다. 콘서트홀의 음향특성에 영향을 주는 가장 중요한 객관적 지표로서는 친밀도, 공간감, 잔향시간, 명료도, 음의 따뜻함, 라우드니스 등을 들 수가 있다. 국내에서 가장 대표적인 콘서트홀이라고 할 수 있는 예술의 전당 음악당에 대해서 위의 개관적 지표 중 5가지 요소를 실제 측정을 통해 추출하였다. 그 결과 예술의 전당 음악당은 친밀도와 공간감 면에서 조금 부족한 면을 보여 주었고 나머지 3가지 요소에 있어서는 클래식 연주에 적합한 콘서트홀로서의 결과를 보여 주었다. 공간감과 친밀도를 향상시키기 위해서는 음악당 천장에 반사판을 설치하는 것이 필요하다고 사료된다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.558-567
• /
• 2019

When used for broadcasting, multipurpose halls need to accommodate various types of programs such as speeches, Korean traditional music, musicals, pop music, and concerts. Therefore, multipurpose halls must meet a wide range of electric and architectural acoustic demands. However, there are few ways to alter acoustic environments for multipurpose halls, given these different demands. The current study investigates the effects of banners on acoustic environments in the presence of an acoustic shell or electric acoustic system. The results indicate that the installation of a 15% banner of wall area could vary the range of reverberation time ($T_{30}$) by 0.12 s, EDT (Early Decay Time) by 0.15 s, clarity of music ($C_{80}$) by 0.76 dB, and clarity of speech ($D_{50}$) by 6.43 % under different measurement circumstances. A computer simulation that enlarges the banner size to 40 % of the wall area varies the reverberation time from 0.11 s to 0.55 s depending on the room environment.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.356-362
• /
• 2018

Stage in classical shoebox type concert hall is placed and occupy one side of the hall and have much early reflections from surrounded walls and ceiling nearby. On the other hand stage in vinyard terrace concert hall, which is surrounded by terrace seats instead of walls and ceiling, has lack of early reflections which may cause lack of communications among the players. Vinyard hall stage is enclosed with terrace seats front walls, while the players located on the stage riser keep the walls off as the walls have limited heights. Ensemble reflector installed above the stage is an effective way for the players to monitor the sound produced on the stage. That may help achieving a good ensemble of the performance. Ensemble reflector over the stage of a large vinyard terrace hall of 2,000 seats was designed with the variables of the location, the shape and the area. The effectiveness of the ensemble reflector is verified with the parameter of stage support.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.87-91
• /
• 2005

The effects of the movable reflectors on the stage acoustics in Seoul's Sejong Performing Arts Center (3,048-seat multi-purpose hall, stage area of $270m^2$ within an orchestra shell) and Ceramic Palace Hall (440-seat concert hall, stage area of $105m^2$) were investigated. Acoustical parameters were evaluated by measuring stage and audience acoustics in the two halls. The study was primarily based on the stage support parameter STI proposed by Gade (Acustica 65, pp.193-203, 1989). Results showed that STI varied on the stage of the large hall according to the position of the reflectors, whereas STI did not vary in the small hall. In the large hall, a smaller clear stage area (bounded by the reflectors) yields an increase in both STI and other early energy measures. In the small hall, early energy decreases when its stage's surface diffusion was covered with specular reflectors.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.11-16
• /
• 1999

In this paper, we designed and fabricated QMSA(Quarter-Wavelength Microstrip Antenna) for 850MHz band on the CGP-500 PTFE substrate(by CHUKOH company) with ε/sub r/=2.6, H=1.6mm(±0.08), where width of the radiation patch is .identical with that of the ground plane. A well matched feed point was obtained by experiments and this QMSA was fed by using prove feed method. The resonant frequencies and the return losses were mcasured by cutting the gap L₃ between the radiation patch and the ground plane, with a 5mm cutting length, step by step. As a result, we found that the measured return losses were decreased and the resonant frequencies were increased when the gap L₃ was shorter, especially under 10mm, unlike we had expected.