• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.457-466
• /
• 1997

The experimental and analytical study was conducted to determine the noise transmission characteristics of acoustically loaded steel plate of rectangular enclosure and to investigate the sound radiation characteristics through out the enclosure. The vibrations of acoustically loaded plate give rise to sound radiations and generate the reverberant space that the sound field exists very close to a vibrating plate. Acoustic transmission loss is measured from the incident intensity into the plate and the transmitted intensity through out the plate. Sound radiation patterns are measured from both acoustic intensity technique and surface intensity technique. Those resultant patterns and vibrational modes are vital in understanding the relations between vibration and noise in the near field out of vibrating plate.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.537-537
• /
• 2010

이 논문에서는 음향 임피던스를 제어하는 능동형 소음 제어 방법을 연구하였다. 관의 끝단에 스피커를 이용하여 음향 임피던스를 제어하게 된다. 음향 임피던스 제어는 음향의 반사를 최소화 하는 제어 방법을 이용하는 것으로, 닫힌 관의 끝단에 음파의 흡수와 반사를 제어한다. 나아가 음향 임피던스 제어 방법은 관의 중앙에 설치되어 적용된다. 이 경우에는 음향의 반사, 흡수 및 전달이 측정되고, 최소화하기 위한 임피던스가 계산된다. 이를 위해 가진기, 마이크로폰, 진동측정용 레이저 바이브로미터, 그리고 능동 소음 제어 하드웨어로 구성된 시스템을 구축하고 검증하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.569-579
• /
• 2012

Typical Tonpilz type underwater acoustic transducers making use of piezoelectric ceramics detect the magnitude of an acoustic pressure, a scalar quantity, and convert this pressure into a proportional output voltage. The scalar sensor has no directional sensitivity. In this paper, we have proposed a new vector sensor based on the Tonpilz transducer structure, which is sensitive to both the magnitude and the azimuthal direction of an acoustic wave. Validity of this new design has been confirmed with analytic equations and finite element analyses.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.28-37
• /
• 2002

Acoustic behavior in combustion chamber with acoustoc cavity is numerically investigated by adopting linear acoustic analysis. Helmholtz-type resonator is employed as a cavity model to suppress acoustic instability passively. The tuning frequency of acoustic cavity is adjusted by varying the sound speed in acoustic cavity. Through harmonic analysis, acoustic pressure responses of chamber to acoustic oscillating excitation are shown and the resonant acoustic modes are identified. Acoustic damping effect of acoustic cavity is quantified by damping factor. As the tuning frequency approaches the target frequency of the resonant mode to be suppressed, mode split from the original resonant mode to lower and upper modes appears and thereby damping effect is degraded significantly. Considering mode split and damping effect as a function of tuning frequency, it is desirable to make acoustic cavity tuned to maximum frequency of those of the possible splitted upper modes.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.5-16
• /
• 1987

In this paper, the sound radiation from a clamped circular plate with a viscoelastic layer excited by impact force is studied both analytically and experimentally. The composite plate vibrations are obtained by using the normal mode analysis and the eigenvalues are obtained by a Mindlin plate theory including the rotary inertia and shear deformation, The contact force developed between the ball and the plate with attached layers is obtained by Hertz contact theory. The radiated sound pressure is calculated by the Rayleigh integral. Prediction of the waveforms of sound radiating from the plate with attached layers and a method for reducing noise generation from the plate by impact force are also shown in this paper.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.241-244
• /
• 2004

전민동 성당은 얕은 팔각뿔대 형상의 지붕을 가진 팔각기둥의 형태로 재설계되었다. 팔각기둥의 형상은 마주보는 4쌍의 벽들로 인하여 공간에서 정상파가 발생하기 쉽고, 지붕 또한 둥근 형태로 음향 초점이 발생할 수 있는 등 여러가지 문제점을 가지고 있다. 이러한 형태의 전민동 성당에 대하여 여러 가지 음향 인자들을 예측하였고, 예측치와 측정치를 비교하였다. 사용된 음장해석 프로그램은 $CATT^{TM}$이고 예측 또는 측정된 음향인자는 RT, D50, C80 등이다. 건축물만의 특성과 전기음향설비가 포함된 음향특성을 비교하기 위하여, 무지향성 스피커를 이용한 측정과 성당에 장착된 전기음향장치를 이용한 측정을 수행하였다. 공연장과 마찬가지로 성당의 신도석에서도 음이 고르게 분포되는 것이 바람직하며, 신도석에서의 음압분포를 예측과 측정을 통하여 비교하여 보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3647-3653
• /
• 2010

An experimental investigation of the flame appearance and heat transfer characteristics in both unexcited and excited impinging inverse diffusion flames with a loud speaker has been performed. The flame is found to become broader and shorter (in length) with acoustic excitation. The heat flux at the stagnation point is increased with the acoustic excitation. The acoustic excitation is more effective in lean conditions than in rich conditions. The reasons for these behaviors are that acoustic excitation improves the entrainment of surrounding air into the jet. From this study, it is found that the maximum increase of 57% in the total heat flux is obtained at the stagnation point of $\Phi$=0.8. Therefore, it is ascertained that the excitation combustion can be adopted with effective instruments as a method for improving heat transfer in impinging jet flames.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.282-287
• /
• 1994

본 연구에서는 연구대상 차량의 소음저감 방안을 마련하기 위하여 차체의 진동 및 차실의 음향 특성해석, 연성해석을 수행하였다. 차실 음향특성을 나타내는 음향모드는 유한요소 해석으로부터 결정하였다. 이때 해석결과를 확인하기 위하여 음향모드를 측정, 수치해석결과와 비교하였다. 차실소음의 가진 특성을 갖는 차체의 진동특성은 모드시험을 통해서 결정하였다. 결정된 이들 모드들의 연성해석은 연성해석 전용 컴퓨터 프로그램을 사용하여 수행하였고, 그 결과를 소음실험 결과와 비교하여 Booming 소음에 기여가 큰 차체 panel부위를 결정하였다. 기여가 큰 panel의 진동특성 변경시 소음효과를 측정하여 구조변경 방안을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.13-22
• /
• 1994

A theoretical model is studied to describe the sound radiation by the surface vibration of in-service tires. The tire is modeled as a circular ring model. The effects of normalized frequency and structrual loss factor are included. Through numerical integration of the sound pressure, the radiated sound power is calculated as a fuction of normalized frequency and structural loss factor. The basic sound radiation mechanism is shown to be the damped progressive wave field on the structure in the vicinity of the applied force. The results indicate that the potential sound reduction might be obtained if values of normalized frequency and structural loss factor are investigated.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.585-591
• /
• 2003

In this paper, fiber optic sensor using Fabry-Perot interferometer which had benefit of minimize and light-weight was used. The sensor head has 1cm in length, total length of fiber is 9.5 chi and the sensor supported at both ends, simply. To analyze the acoustic characteristic non-directional speaker is used as a sound source. Acoustic applied in lateral direction and detected two signals were compared each other. Below 1㎑ fiber optic sensor has more sensitive than microphone, but in 2㎑ fiber optic sensor has less sensitive than microphone. This characteristic varies to the supporting system of fiber optic sensor. It was confirmed that the Fabry-Perot interferometric sensor detected acoustic signal, effectively. This kind of sensor can be applied to the structural health monitoring field of intellectual structure.