• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.530-535
• /
• 1998

본 논문에서는 마운트의 음향 강성계수를 실험적으로 구하기 위한 이론적 배경을 설명하고, 개발된 시험장치를 소개하였으며, 시험장치를 이용하여 구한 마운트의 음향 강성계수 측정결과를 수록하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.57-64
• /
• 1996

제지공장에서 사용하는 습윤제는 물의 표면장력을 낮춤으로써 목재섬유가 물을 빨리 흡수하여 팽윤하도록 도와준다. 목재섬유가 물을 흡수하여 팽윤하는 과정을 밝히지 위한 연구가 많이 진행되어 왔지만 목재섬유와 물의 상호작용을 상세히 연속적으로 측정할 방법이 전에는 별로 없었다. 목재섬유가 팽윤할 때 발생하는 팽윤압력은 음향방사를 동반하기 때문에 이를 측정하여 팽윤과정을 알아내는 기술이 개발되었다. 본 연구에서는 이 방법을 이용하여 목재를 여러 농도의 습윤제에 담갔을 때 발생하는 음향방사와 중량증가를 측정하여 이 두 변량의 상관을 조사하고 이 방법이 목재의 습윤과정 연구에 유용하게 사용될 수 있는지를 조사하였다. 아까시나무와 라디에타 파인의 두 수종을 사용하였는데 두 수종의 흡수 형태는 매우 달랐다. 5분 동안 용액에 침지하였을 때 후자가 전자보다 10배 정도 더 많이 중량증가하였으며, 발생한 음향방사도 후자가 전자보다 훨씬 많았다. 아까시나무의 중량증가와 음향방사는 습윤제 농도에 거의 무관하였으나 라디에타 파인의 음향방사는 습윤제 농도의 증가에 따라 증가하였으며 라디에타 파인의 중량증가는 습윤제의 표면장력 변화와 일치하였다. 수종별 중량증가와 음향방사의 관계는 아까시나무가 음의 상관을 나타냈으나 라디에타 파인은 양의 상관을 나타내었다. 자비처리 시편은 무처리 시편보다 음향방사가 적었다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.62-65
• /
• 2008

White Noise는 일반적으로 이완의 감성을 유발한다고 알려져 있다. 본 논문에서는 두 종류의 음향에 White Noise를 혼합하였을 때 사용자에게 이완의 감성을 유발시킬 수 있는지 실험을 통하여 검증하였다. 실험은 20명의 피험자를 대상으로 원본 음향과 White Noise가 추가된 음향을 들려주고, 각성-이완에 대한 주관적 설문과 중추신경계 반응 그리고 자율신경계 반응을 측정하였다. 실험결과는 t-test를 통하여 음향 별 감성평가 유의성 검증을 실시하였다. 분석 결과 White Noise가 혼합된 음향은 그렇지 않은 음향에 비해 이완감성 측정값이 큰 것으로 나타났다. 따라서 White Noise가 혼합된 음향은 이완 유발 효과가 크다고 할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.4
• /
• pp.298-303
• /
• 2023

This study aimed to investigate the clinical utility of voiced sentence tasks for voice evaluation. To this end, we analyzed the correlation between perturbation-based acoustic measurements [jitter percent (jitter), shimmer percent (shimmer), Noise to Harmonic Ratio (NHR)] using sustained vowel phonation, and cepstrum-based acoustic measurements [Cepstral Peak Prominence (CPP), Low/High spectral ratio (L/H ratio)] using voiced sentences. As a result of analyzing data collected from 65 patients with voice disorders, there was a significant correlation between the CPP and jitter (r = -.624, p = .000), shimmer (r = -.530, p = .000), NHR (r = -.469, p = .000).This suggests that the cepstrum measurement of voiced sentences can be used as an alternative to the analysis limitations of the pathological voice such as not possible perturbation-based acoustic measurement, and result difference according to the analysis section.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.66-72
• /
• 1996

In order to the sound effects and acoustics estimation of PANSORI hall, we are researched into the impulse response measuring and convolution integral of dry music(PANSORI) by using 1/10 scale model. Results are as follwo. First, impulse responses are measured by spark sound of electrodes and it is absolutely necessary many times of synchronous calculating for the obtain to enough S/N ratio. Second, a simulation technique of scale model is confirmed one of an effectual method of indoor acoustics estimation. Further, using the these new techniques and hearing test, its are recognized that reverberation time of PANSORI hall is about $1.0{\sim}$12.$ second suitable.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.146-154
• /
• 2010

The effects of severe plastic deformation, equal channel angular pressing, and annealing of Al 5052 alloy on elastic modulus have been studied. The AI 5052 alloy was plastically deformed by ECAP method after solution treatment, and then finally annealing heat treated. Elastic modulus was measured by conventional tensile and nano-indentation test, and also measured on the surface of the specimen using acoustic material signature of the acoustic microscope. The variation in the elastic modulus influenced by plastic deformation and heat treatment, inaccessible by the conventional techniques, was successfully measured by acoustic material signature and obtained the elastic modulus depending on crystal orientation at each grain.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2021

The measurement of the Underwater Radiated Noise (URN) for the underwater vehicle should consider both the acoustic interference due to the surface reflection and the calculation of the Closet Point of Approach (CPA). In this paper, I tried to analyze the underwater vehicle's URN using the Lloyd's mirror effect. First, the theoretical Lloyd's mirror pattern was compared with the sea trial result, and the sea trial results corresponded well with the theoretical predicted pattern. And then the CPA distance could be estimated by the Lloyd's mirror pattern. As a results, acoustic source level shows the spectral fluctuation due to the acoustic interference of the Lloyd's mirror effect.

• The Journal of the Acoustical Society of Korea
• /
• v.3 no.1
• /
• pp.43-54
• /
• 1984

본 논문에서는 음성파형 부호화기의 성능을 실시간 측정하기 위한 시스템의 구현에 관하여 연구 하였다. 본 장비는 "bit slice" 마이크로프로세서로 설계되었다. 개발된 시스템으로 세 개의 codec의 성능 을 측정하였으며 이 결과를 distortion analyzer로 측정한 결과와 비교하였다. 개발된 장비는 음성 부호 화기의 성능시험을 위한 주관적 청취시험 과정을 피할 수 있게 되었다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.216-222
• /
• 2015

A previous velocity measurement system for marine sediment had several problems such as the errors occurred when picking first arrival time and the inconvenient measurement procedure. In order to resolve these problems, we developed a new acoustic properties measurement system by using PXI (PCI eXtentions for Instrumentation) module based on LabVIEW. To verify the new system, we measured the velocity and attenuation of sediment using the new system in a parallel with the previous system under the same experimental environment. The result of measurement showed 1~2% margin of error for the velocity as well as similar attenuation values. We concluded that the new system can efficiently measure the acoustic properties of marine sediment. It also has an advantage to construct the database of acoustic data and raw signal.

• Composites Research
• /
• v.16 no.6
• /
• pp.16-22
• /
• 2003

This paper studied the AE(acoustic emission) characteristics of the laminated composite structures. The composite stiffened panels under the compressive loading emitted various AE signals when they buckled or changed the buckling modes. In addition, the failure initiated and propagation generated a lot of complex signals. From the continuous signal generation. we identified when the failures initiated and whether they propagated or not. The single lap joint of laminated plates under tensional load also generated AE signals when bonding region failed. The first failure occurrence and its propagation are monitored by generated AE signals. The characteristics of AE signals used in this analysis are cumulative hits, hit distribution, peak frequency of generated AE waveform and amplitude of signals. The analysis of AE signals shows that continuous increment of cumulative hits can be regarded as damage propagation and three dominant peak frequencies can correspond to typical failure modes in the laminated composites.