• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.52-52
• /
• 2010

동해 한국대지 남부(south Korea Plateau)에서 2010년 2월에 한국해양연구원의 온누리호를 이용하여 해저지형 및 자생광물 탐사가 실시되었다. 다중빔 음향측심기를 이용한 해저지형 조사는 2-3 km 탐사측선 간격으로 약 400 L-km 정도가 실시되었다. 조사구역 A($37^{\circ}$ 16'-18'N, $130^{\circ}$ 02'-16'E)는 890-1,900 m의 수심범위와 남쪽으로 갈수록 수심이 깊어져 울릉분지(Ulleung Basin)와 연결된다. 크고 작은 소규모의 구릉이 사면을 따라 다수 분포하고 있다. 조사구역 B($37^{\circ}$ 26'-40'N, $130^{\circ}$ 23'-34'E)의 정상부는 900-1,000 m로 비교적 평평하게 나타났고, 남동방향으로는 2,200 m까지 급격하게 수심이 증가하는 사면으로 이루어져 있다. 한국대지내 노출 암반지역은 남동쪽 사면의 일부 지역에 분포하고 있다. 자생광물 탐사는 일차적으로 천부지층 탄성파탐사를 수행하여 시료채취 가능 여부를 현장에서 확인한 후에, A 및 B구역내 11개 지점에서 드렛지를 이용하여 암석시료를 채취하였다. 채취된 암석은 주로 현무암이며, 많은 양의 화산기원 부석(pumice) 및 화산재(box core 자료)도 확인되었다. 또한, 인광석으로 추정되는 암석과, 망간단괴(manganese nodules)와 망간각(manganese crust)의 일부 시료도 채취하는데 성과가 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.68-72
• /
• 2019

대하천사업으로 4대강에 다기능보 건설 및 대규모 준설이 이루어졌으며, 그 과정을 통해 인위적으로 변화된 하천지형은 시간이 경과함에 따라 유사공급과 유수흐름 등 다양한 요인들의 복합적 영향 하에서 지속적 변화과정을 거치게 된다. 따라서 하천의 효율적인 운영 및 관리를 위해서는 하천지형에 대한 연속적인 측정 및 분석을 통해 하천유로의 지형학적 특성과 그 변화의 양상과 정도를 파악하는 것이 필요하다. 본 연구에서는 낙동강 중 하류 구간에 대하여 음향측심기를 이용한 수심측량을 통해 유로의 지형정보를 취득 분석하여 다기능보 건설 후 유로의 지형학적 특성에 있어서의 변화 양상을 파악하고자 하였다. 이를 위하여 취득된 지형자료를 활용하여 유로 단면에 대한 기하학적 특성치들을 통한 형태학적 분석을 실시하였다. 또한 대하천사업 준공시 취득된 측량성과정보와의 비교를 통해 지형변화 양상과 정도를 파악하였다. 이를 통 해 대하천사업 이후 낙동강 중 하류 구간 유로의 지형변화 양상과 규모를 파악할 수 있었으며, 대하천사업 이후 준공측량성과를 기반으로 고시된 하천기본계획 상 지형정보의 정확성에 대해 평가할 수 있었다. 본 연구의 공간적 범위가 낙동강 중 하류 중 일부 구간들에 제한되었기에, 향후 본 연구에서 제안한 방법론을 활용한 지형특성 및 변화의 양상과 규모에 대한 지속적인 평가가 필요할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.369-373
• /
• 2015

본 연구에서는 낙동강 강정고령보에서 달성보 구간에 대한 지속적 지형조사를 통해 다기능보 건설 및 운영으로 인한 하천지형의 변화양상과 정도를 파악하고자 하였다. 이를 위하여 4대강살리기사업 이전의 측량성과(낙동강하천기본계획, 2009년)를 기준으로 보 건설 및 하도정비 이후인 2013년과 2015년에 실측한 지형자료와 비교하였다. 2013년과 2015년 지형자료 취득은 대상구간(강정고령보~달성보: 23 km) 내 하도와 홍수터에 대해 각각 단일 및 다중빔 음향측심기와RTK-GPS 등의 측량장비를 이용하여 40 m 이상의 평면공간해상도를 가지도록 수행하였다. 대상구간 내 하천기본계획 지정 횡단측선에 대해 2013년과 2015년 지형정보를 비교함으로써 보 건설 및 하도정비로 인한 지형변화양상과 정도를 파악하고자 하였다. 특정 측선에서의 횡단지형자료인 2009년 측량성과와 비교하여 2013년과 2015년 실측자료는 전체 대상구간에 대한 3차원 공간정보를 제공함으로써 이들 간의 정성, 정량적 비교를 통하여 보 건설 및 운영을 통한 하도내 국부적 지형변화의 정도와 양상을 파악할 수 있었다. 이를 통해 하천의 지형학적, 수리학적 특성뿐만 아니라 보 건설 및 하도정비 등의 물리적 여건변화에 따른 특정 하천구간에 대한 시 공간적 지형변화특성을 파악할 수 있었으며, 이는 향후 하천관리 및 설계를 위한 연구와 실무에 널리 활용될 수 있을 것으로 기대된다.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.61-67
• /
• 2021

With the recent development of bathemetry technology, the hydrographic surveying method has been changed from single beam depth device use to multi beam acoustic sounding technology. Also, various studies have been reported to obtain high accuracy and precision in the process of river bed topographic data. Especially south korea is geographically on three sides of the sea and the river topography is very developed. To build information about the underwater, and riverbed status, the public investigations has been continuously progressed. In this study, We investigasted the riverbed topography near Baeckma river leisure park. for this purpose, In this study, as the first preliminary survey, location of navigational dangerous objects and reefs and the dangerous areas are identified. Also, ground control points is selected for the optimal GPS surveying. Secondary, through test surveying the Gain, TVG, and pulse length are determined. In addition, the investigation of dangerous objects for navigation is also conducted. As the last step, the error analysis are conducted for the acquired data, and this process involves the removal and adjustments of errors. This section includes the analysis of tide level and navigational contributions, and finally generates a submarine topographic map.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.133-141
• /
• 2023

Accurate measurement of seafloor topography plays a crucial role in developing marine industries such as maritime safety, resource exploration, environmental protection, and coastal management. The seafloor topography is constructed using side scan sonar (SSS) and single beam echosounder (SBES) or multibeam echosounder (MBES), which transmit and receive ultrasound waves through a device attached to a marine survey vessel. However, the use of a sonar system is affected by noise pollution areas, and the single beam has a limited scope of application. At the same time, the multibeam is mainly applicable for depth observation. For these reasons, it is difficult to determine the boundaries and areas of seafloor topography. Therefore, this study proposes a method to improve the backscatter data of multibeam echosounder, which has a relationship with the seafloor quality, by using digital image processing to classify the shape of the underwater surface.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.1
• /
• pp.33-47
• /
• 2022

In this study, distribution of submarine sand ridges in the coastal waters of Korea was surveyed using multibeam echo sounder data, and the topographic characteristics of each region were identified. For this purpose, the DEM (Digital Elevation Model) data was generated using depth data obtained from the Yellow Sea and the South Sea by Korea Hydrographic and Oceanographic Agency, and then applied the TPI (Topographic Position Index) technique to precisely extract the boundary of the sand ridges. As a result, a total of 200 sand ridges distributed in the coastal waters were identified, and the characteristics of each region of the sedimentary sediments were analyzed by performing statistical analysis on the scale (width, length, perimeter, area, height) and shape (width/length ratio, height/width ratio, linear·branch type, exposure·non-exposure type). The results of this study are expected to be used not only for coastal navigational safety, but also for marine naming support, marine aggregate resource identification, and fisheries resource management.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.161-167
• /
• 2019

In this paper, the performance verification of an around-view sonar and an excavation depth measuring sonar applicable to track-based ROVs (Remotely Operated underwater Vehicles) for heavy duty work is studied. For the performance verification, an experiment is carried out in a water tank and at sea by attaching the around-view sonar and the excavation depth measuring sonar for a heavy work ROV. In the case of the around-view sonar, image sonars are mounted on ROV in four directions (front, back, left and right) and in the case of the excavation depth measuring sonar, the same kind of MBES (Multi Beam Echo Sounder) is mounted on the front of the ROV. The result of an operation test of the ROV equipped with these sonars shows that the sonar systems are rarely affected by high turbidity due to sedimentation during the operation. In the case of the around-view sonar, it is possible to see rock formation, gravel and sandbank 30 m ahead of the ROV. It is confirmed that the excavation depth can be measured after the ROV has performed the excavation. This experiment demonstrates that the ROV can improve the efficiency of the work by utilizing the around-view sonar and the excavation depth measuring sonar.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.669-676
• /
• 2010

Visualization requires for effective analysis of the spatial data collected by various sensors. The best way to convey 3D digital spatial information which is modeling of the real world to the users, realistic 3D visualization and display technology. Since most of the display is based on 2D or 2.5D projection to the plane, there is limitation in representing real world in 3D space. In this paper, data from airborne LiDAR for topographic mapping, Flashi-LiDAR as emerging sensor with great potential to 3D data acquisition, and multibeam echo-sounder for underwater measurement, were stereoscopically visualized. 3D monitors are getting popular and could be information media and platform in geoinformatics. Therefore, study on creating 3D stereoscopic contents of spatial information is essential for new technology of stereo viewing systems.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2005

In this study, three-dimensional information of submarine topography acquired by assembling DGPS method and echo sounder which mainly used in the marine survey. Moreover, the hopper dredging capacity in harbor public affair has been calculated by utilizing kriging, radial basis function and nearest neighbor interpolation. Also, utilization of DGPS/Echo sounder method in calculation of the dredging capacity have been confirmed by comparing and analyzing the hopper dredging capacity and the actual one as per each interpolation. According to this comparison result, in case of applying kriging interpolation, some 1.89% of error rate has been shown as difference of the contents is 15,364 ㎥ and in case of applying radial basis function interpolation and nearest neighbor interpolation, 3.9% and 4.4% of error rates have respectively shown. In case the study for application of the proper interpolation as per characteristics of submarine topography, is preceded in calculation of the dredging capacity relevant to harbor public affairs, it is expected that more speedy and correct calculation for the dredging capacity can be made.

• Spatial Information Research
• /
• v.17 no.1
• /
• pp.103-115
• /
• 2009

Recently, the seabed facility is gradually being increased based on the development of harbor and the coastal area. However, the comparison between the survey data with the chart still shows the significant differences leading to various disasters over sea accident. Therefore, in this study, the investigation on the seabed facility were performed in 5 areas through an accuracy analysis using an up-to-date surveying equipment(MBES, SSS and SBP). Based on the study more systematic management on the seabed facility, more accurate method on the surveying, and some considerations on the related policies are suggested. Through the study, we obtained more accurate measurement on depth and seabed piping forms in Jakdo and Pyong-tack, on sunken ship in a Mok-po, on seabed crater in Je-ju. In addition, it was possible to present the method for the construction of information infra and a connection with the seabed facility. The criteria on the equipment's specification, surveying method and procedures are set by the experiments and the investigation and surveying accuracy on the seabed facilities are also suggested.